Formenbau für die Automobilindustrie
Im Bereich Automotive Molding kommt kondensations- und additionsvernetzender ELASTOSIL® M Siliconkautschuk als Abformmaterial im Prozess der Reifenformherstellung und bei Abformungen und Oberflächengestaltung für das Auto-Interieur zum Einsatz, etwa für Kunstleder.
Vorteile:
- Einfache Verarbeitung ohne teures Equipment
- Sehr gute Umweltverträglichkeit
- Hohe Reproduktionsgenauigkeit
- Hohe mechanische Festigkeit
Anwendungen:
- Reifenformherstellung (Kopieren des CAD-Masters/neue Designstudien)
- Herstellung der Innenausstattung wie Lenkräder und Leder-Armaturen
Product Recommendations
Table is scrollable
|
Products
|
Technical data
|
Product properties
|
||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Viscosity, dynamic | Tear strength | Hardness Shore A | Tensile strength | Elongation at break | Resistance | Regulation | Product Rheology | Crosslinking Property | ||
| 3000 mPa·s[1] 3000 mPa·s[1] | 15 N/mm[4] 15 N/mm[4] | 10[5] 10[5] | 3,5 N/mm²[7] 3,5 N/mm²[7] | 600 %[9] 600 %[9] | - | - | Flowable | No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature | ||
| 6000 mPa·s[2] 6000 mPa·s[2] | - - | 20[5] 20[5] | 4 N/mm²[7] 4 N/mm²[7] | 500 %[9] 500 %[9] | - | - | Flowable | No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature | ||
| 15000 mPa·s[3] 15000 mPa·s[3] | > 30 N/mm[4] > 30 N/mm[4] | 28[6] 28[6] | 6,5 N/mm²[8] 6,5 N/mm²[8] | 700 %[10] 700 %[10] | Resistance against casting resins | Food-contact | Flowable | No chemical shrinkage, Two-component, Addition Curing | ||
| 40000 mPa·s[3] 40000 mPa·s[3] | > 10 N/mm[4] > 10 N/mm[4] | 48[6] 48[6] | 5 N/mm²[8] 5 N/mm²[8] | 300 %[10] 300 %[10] | Resistance against casting resins | - | Flowable | No chemical shrinkage, Two-component, Addition Curing | ||
Legend
[1] Viscosity, dynamic | Brookfield, [2] Viscosity, dynamic 23°C | ISO 3219, [3] Viscosity, dynamic after stirring | 23 °C | ISO 3219, [4] Tear strength | ASTM D 624 B, [5] Hardness Shore A | DIN ISO 48-4, [6] Hardness Shore A | ISO 868, [7] Tensile strength | ISO 37 type 1, [8] Tensile strength | ISO 37, [9] Elongation at break | ISO 37 type 1, [10] Elongation at break | ISO 37
[1] Viscosity, dynamic | Brookfield, [2] Viscosity, dynamic 23°C | ISO 3219, [3] Viscosity, dynamic after stirring | 23 °C | ISO 3219, [4] Tear strength | ASTM D 624 B, [5] Hardness Shore A | DIN ISO 48-4, [6] Hardness Shore A | ISO 868, [7] Tensile strength | ISO 37 type 1, [8] Tensile strength | ISO 37, [9] Elongation at break | ISO 37 type 1, [10] Elongation at break | ISO 37