Unser System hat erkannt, dass Sie aus USA kommen aber die aktuelle Ländereinstellung Belgien ist. Wollen Sie dennoch Ihr Land ändern?

Steckverbindungen

Dank ihrer physikalischen, mechanischen und isolierenden Eigenschaften eignen sich ELASTOSIL® Siliconkautschuktypen hervorragend für elektrische Steckverbindungen in Fahrzeugen. Die ausgezeichnete Chemikalienbeständigkeit, die perfekten Isoliereigenschaften und die hohe thermische Belastbarkeit sorgen stets für eine sichere und zuverlässige Stromversorgung.

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Aussehen Härte Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® LR 3003/20 TR A/B transparent transparent 22[1] 22[1] 8,3 N/mm²[2] 8,3 N/mm²[2] 870 %[3] 870 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/30 A/B transparent transparent 30[1] 30[1] 7,0 N/mm²[2] 7,0 N/mm²[2] 610 %[3] 610 %[3] 21 N/mm[4] 21 N/mm[4] 10 %[5] 10 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/40 A/B transparent transparent 40[1] 40[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 610 %[3] 610 %[3] 30 N/mm[4] 30 N/mm[4] 11 %[5] 11 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/50 A/B transparent transparent 50[1] 50[1] 10,3 N/mm²[2] 10,3 N/mm²[2] 490 %[3] 490 %[3] 26 N/mm[4] 26 N/mm[4] 13 %[5] 13 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/60 A/B transparent transparent 60[1] 60[1] 9,8 N/mm²[2] 9,8 N/mm²[2] 340 %[3] 340 %[3] 27 N/mm[4] 27 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/70 A/B transparent transparent 70[1] 70[1] 9,3 N/mm²[2] 9,3 N/mm²[2] 290 %[3] 290 %[3] 20 N/mm[4] 20 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3005/30 A/B transparent transparent 30[1] 30[1] 6,0 N/mm²[2] 6,0 N/mm²[2] 610 %[3] 610 %[3] 16 N/mm[4] 16 N/mm[4] 13 %[6] 13 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/40 A/B transparent transparent 40[1] 40[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 600 %[3] 600 %[3] 22 N/mm[4] 22 N/mm[4] 16 %[6] 16 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/50 A/B transparent transparent 50[1] 50[1] 8,7 N/mm²[2] 8,7 N/mm²[2] 500 %[3] 500 %[3] 24 N/mm[4] 24 N/mm[4] 15 %[6] 15 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/60 A/B transparent transparent 60[1] 60[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 380 %[3] 380 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[6] 15 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/70 A/B transparent transparent 70[1] 70[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 330 %[3] 330 %[3] 23 N/mm[4] 23 N/mm[4] 19 %[6] 19 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3065/30 A/B transparent transparent 30[1] 30[1] 7,5 N/mm²[2] 7,5 N/mm²[2] 650 %[3] 650 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[6] 17 %[6] Low compression set without post-cure, Low coefficient of friction, Reduced volatile content
ELASTOSIL® LR 3065/50 A/B transparent transparent 50[1] 50[1] 9,0 N/mm²[2] 9,0 N/mm²[2] 460 %[3] 460 %[3] 31 N/mm[4] 31 N/mm[4] 15 %[6] 15 %[6] Low compression set without post-cure, Low coefficient of friction, Reduced volatile content
ELASTOSIL® LR 3072/30 A/B opaque opaque 30[1] 30[1] 7,4 N/mm²[2] 7,4 N/mm²[2] 710 %[3] 710 %[3] 17 N/mm[4] 17 N/mm[4] 27 %[7] 27 %[7] Self-adhesive, Oil bleeding
ELASTOSIL® LR 3072/40 A/B opaque opaque 40[1] 40[1] 8,8 N/mm²[2] 8,8 N/mm²[2] 620 %[3] 620 %[3] 21 N/mm[4] 21 N/mm[4] 21 %[7] 21 %[7] Self-adhesive, Oil bleeding
ELASTOSIL® LR 3072/50 A/B opaque opaque 50[1] 50[1] 8,6 N/mm²[2] 8,6 N/mm²[2] 510 %[3] 510 %[3] 23 N/mm[4] 23 N/mm[4] 12 %[7] 12 %[7] Self-adhesive, Oil bleeding
ELASTOSIL® LR 3675/30 A/B transparent transparent 30[1] 30[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 760 %[3] 760 %[3] 25 N/mm[4] 25 N/mm[4] 14 %[7] 14 %[7] Self-adhesive, Low coefficient of friction
ELASTOSIL® LR 3675/50 A/B transparent transparent 50[1] 50[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 410 %[3] 410 %[3] 33 N/mm[4] 33 N/mm[4] 12 %[7] 12 %[7] Self-adhesive, Low coefficient of friction
ELASTOSIL® LR 3803/50 A/B opaque opaque 50[1] 50[1] 7,4 N/mm²[2] 7,4 N/mm²[2] 460 %[3] 460 %[3] 39 N/mm[4] 39 N/mm[4] 10 %[6] 10 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3814/30 A/B off-white off-white 30[1] 30[1] 6,8 N/mm²[2] 6,8 N/mm²[2] 680 %[3] 680 %[3] 20 N/mm[4] 20 N/mm[4] 18 %[6] 18 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3814/50 A/B off-white off-white 50[1] 50[1] 8,2 N/mm²[2] 8,2 N/mm²[2] 450 %[3] 450 %[3] 34 N/mm[4] 34 N/mm[4] 15 %[6] 15 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3833/50 A/B white white 50[1] 50[1] 7,5 N/mm²[2] 7,5 N/mm²[2] 460 %[3] 460 %[3] 38 N/mm[4] 38 N/mm[4] 7 %[6] 7 %[6] Ultra-low compression set, Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3841/50 A/B opaque opaque 50[1] 50[1] 9,0 N/mm²[2] 9,0 N/mm²[2] 490 %[3] 490 %[3] 30 N/mm[4] 30 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/40 A/B opaque opaque 40[1] 40[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 610 %[3] 610 %[3] 25 N/mm[4] 25 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/50 A/B opaque opaque 50[1] 50[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 460 %[3] 460 %[3] 37 N/mm[4] 37 N/mm[4] 12 %[6] 12 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/60 A/B opaque opaque 60[1] 60[1] 9,2 N/mm²[2] 9,2 N/mm²[2] 420 %[3] 420 %[3] 32 N/mm[4] 32 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/70 A/B opaque opaque 68[1] 68[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 350 %[3] 350 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[6] 16 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3843/30 A/B opaque opaque 30[1] 30[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 680 %[3] 680 %[3] 22 N/mm[4] 22 N/mm[4] 16 %[6] 16 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3844/30 A/B opaque opaque 30[1] 30[1] 7,2 N/mm²[2] 7,2 N/mm²[2] 700 %[3] 700 %[3] 22 N/mm[4] 22 N/mm[4] 15 %[6] 15 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3844/40 A/B opaque opaque 40[1] 40[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 550 %[3] 550 %[3] 24 N/mm[4] 24 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3844/50 A/B opaque opaque 50[1] 50[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 500 %[3] 500 %[3] 36 N/mm[4] 36 N/mm[4] 14 %[6] 14 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3846/20 A/B opaque opaque 21[1] 21[1] 6,1 N/mm²[2] 6,1 N/mm²[2] 800 %[3] 800 %[3] 16 N/mm[4] 16 N/mm[4] 16 %[6] 16 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3846/30 A/B opaque opaque 30[1] 30[1] 7,0 N/mm²[2] 7,0 N/mm²[2] 750 %[3] 750 %[3] 19 N/mm[4] 19 N/mm[4] 15 %[6] 15 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3856/20 A/B opaque opaque 21[1] 21[1] 6,2 N/mm²[2] 6,2 N/mm²[2] 850 %[3] 850 %[3] 16 N/mm[4] 16 N/mm[4] 18 %[6] 18 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3856/30 A/B opaque opaque 32[1] 32[1] 6,5 N/mm²[2] 6,5 N/mm²[2] 600 %[3] 600 %[3] 25 N/mm[4] 25 N/mm[4] 14 %[6] 14 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® R plus 4806/20 MH - - 23[1] 23[1] 6,3 N/mm²[2] 6,3 N/mm²[2] 880 %[3] 880 %[3] 15 N/mm[4] 15 N/mm[4] 14 %[8] 14 %[8] Oil bleeding, One-component, Addition Curing
ELASTOSIL® R plus 4846/30 MH - - 30[1] 30[1] 10,8 N/mm²[2] 10,8 N/mm²[2] 1100 %[3] 1100 %[3] 34 N/mm[4] 34 N/mm[4] 19 %[8] 19 %[8] Oil bleeding, One-component, Addition Curing
Legend
[1] Härte Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A,  [7] Compression Set | 22 h | 125 °C | DIN ISO 815-1 type B method A,  [8] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited