Unser System hat erkannt, dass Sie aus USA kommen aber die aktuelle Ländereinstellung Dänemark ist. Wollen Sie dennoch Ihr Land ändern?

Allgemeine Kautschukteile für Automobile

Auch wenn sie meist unsichtbar bleiben: Silicone von WACKER haben sich als hochwertiger und zuverlässiger Werkstoff in der Automobilindustrie einen besonderen Namen gemacht. Das liegt vor allem an ihrem vielseitigen Eigenschaftsprofil und den daraus resultierenden universellen Einsatzmöglichkeiten: WACKER Silicone finden sich unter der Motorhaube, im Antriebsbereich, in der Elektronik und Elektrik, im Innenraum oder an den Nahtstellen der Karosserie. Dort überall schützen sie bei großer Hitze vor aggressiven Medien, dichten, dämpfen, leiten oder isolieren. Dies alles wird möglich, weil sich Silicone als Basisstoff in ihrem Eigenschaftsprofil so faszinierend flexibel zeigen.

Vorteile:

  • Ausgezeichnete Isolierung
  • Hohe Temperaturbeständigkeit
  • Lange Lebensdauer

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® LR 3003/60 A/B transparent transparent 60[1] 60[1] 9,8 N/mm²[2] 9,8 N/mm²[2] 340 %[3] 340 %[3] 27 N/mm[4] 27 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3005/60 A/B transparent transparent 60[1] 60[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 380 %[3] 380 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[6] 15 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® R 401/60 S transparent transparent 60[1] 60[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 550 %[3] 550 %[3] 26 N/mm[4] 26 N/mm[4] 16 %[7] 16 %[7] Food-contact, General purpose
ELASTOSIL® R 401/70 S transparent transparent 70[1] 70[1] 11,3 N/mm²[2] 11,3 N/mm²[2] 530 %[3] 530 %[3] 31 N/mm[4] 31 N/mm[4] 22 %[7] 22 %[7] Food-contact, General purpose
ELASTOSIL® R plus 4001/60 MH transparent transparent 60[1] 60[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 710 %[3] 710 %[3] 30 N/mm[4] 30 N/mm[4] 18 %[7] 18 %[7] Food-contact, One-component, Addition Curing
ELASTOSIL® R plus 4061/60 MH 9005 black black 60[1] 60[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 520 %[3] 520 %[3] 32 N/mm[4] 32 N/mm[4] 13 %[6] 13 %[6] Heat resistant, One-component, Low compression set, Addition Curing
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A,  [7] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited