Unser System hat erkannt, dass Sie aus USA kommen aber die aktuelle Ländereinstellung Dänemark ist. Wollen Sie dennoch Ihr Land ändern?

Special FX-Molding

Mit unseren additions-vernetzenden ELASTOSIL® FX Silikonkautschuken und Additiven können realistische und beeindruckende Effekte auf der Haut, für Masken und Dekoration realisiert werden. Film, Theater und Cosplay sind mögliche Einsatzbereiche.

Vorteile:

  • Sicher anzuwenden auf der Haut (keine Hautirritation)
  • Sehr weich, hervorragende Dehnung erlaubt Mimik und Sprechen bei Einsatz im Bereich Life Molding und Masken
  • Hohe Reproduktionsgenauigkeit

Anwendungen:

  • Make-Up FX / Lifecasting
  • Wunden und Narben
  • Masken
  • Körperteile / Prothetik-Effekte
  • Formen für dekorative Elemente / Accessoires für Bühne und Film

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
dynamische Viskosität Viscosity, dynamic Tear strength Hardness Shore A Hardness Shore 00 Tensile strength Elongation at break Regulation Product Rheology Crosslinking Property
ELASTOSIL® FX 10 A/B 6000 mPa·s[1] 6000 mPa·s[1] - - > 20 N/mm[5] > 20 N/mm[5] 10[7] 10[7] - - 4,5 N/mm²[8] 4,5 N/mm²[8] 950 %[9] 950 %[9] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX 20 A/B 5000 mPa·s[2] 5000 mPa·s[2] - - 25 N/mm[5] 25 N/mm[5] 20[7] 20[7] - - > 6 N/mm²[8] > 6 N/mm²[8] > 750 %[9] > 750 %[9] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX 28 A/B 10000 mPa·s[3] 10000 mPa·s[3] - - 28 N/mm[6] 28 N/mm[6] 28[7] 28[7] - - 6 N/mm²[8] 6 N/mm²[8] 500 %[9] 500 %[9] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX Gel 30 A/B - - 4000 mPa·s[4] 4000 mPa·s[4] 5,5 N/mm[5] 5,5 N/mm[5] - - 30[10] 30[10] > 1,5 N/mm²[8] > 1,5 N/mm²[8] > 900 %[9] > 900 %[9] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
Legend
[1] dynamische Viskosität | 23 °C | ISO 3219,  [2] dynamische Viskosität aufgerührt | 23 °C | ISO 3219,  [3] dynamische Viskosität after stirring | 23 °C | ISO 3219,  [4] Viscosity, dynamic after stirring | 23 °C | ISO 3219,  [5] Tear strength | ASTM D 624, Die B,  [6] Tear strength | ASTM D 624 B,  [7] Hardness Shore A | DIN ISO 48-4,  [8] Tensile strength | ISO 37 type 1,  [9] Elongation at break | ISO 37 type 1,  [10] Hardness Shore 00 | ASTM D 2240