Unser System hat erkannt, dass Sie aus USA kommen aber die aktuelle Ländereinstellung Israel ist. Wollen Sie dennoch Ihr Land ändern?

Dämpfung

WACKER Siliconöle sowie Flüssig- und Festsiliconkautschuke bieten eine perfekte Kombination von idealen Dämpfungseigenschaften, langer Haltbarkeit und Zuverlässigkeit und sind daher ein integraler Bestandteil des modernen Automobil- und Motorenbaus. Ihre überlegene Funktionalität wird besonders deutlich, wenn die Anwendung den Einsatz in einem breiten Temperaturbereich erfordert.

Vorteile:

  • Konstante Dämpfungseigenschaften über einen breiten Temperaturbereich
  • Vielseitig einsetzbar durch adaptierbare Dämpfungseigenschaften
  • Schnelle Vernetzung
  • Hohe Weiterreißfestigkeit
  • Niedriger Druckverformungsrest
  • Hervorragende Hitzebeständigkeit
  • Hohe dynamische Belastbarkeit

Anwendungen:

Schwingungstilger für

  • Airbags
  • Elektronische Komponenten
  • Auspuff
  • Motor
  • Karosserie

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® eco LR 3003/80 A/B transparent transparent 77[1] 77[1] 8,3 N/mm²[2] 8,3 N/mm²[2] 240 %[3] 240 %[3] 12 N/mm[4] 12 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® eco R 401/40 S transparent transparent 41[1] 41[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[6] 16 %[6] Food-contact, General purpose
ELASTOSIL® eco R 401/80 S transparent transparent 81[1] 81[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 430 %[3] 430 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[6] 41 %[6] Food-contact, General purpose
ELASTOSIL® LR 3003/10 TR A/B transparent transparent 12[1] 12[1] 4,2 N/mm²[2] 4,2 N/mm²[2] 760 %[3] 760 %[3] 13 N/mm[4] 13 N/mm[4] 13 %[5] 13 %[5] General purpose, Reduced volatile content
ELASTOSIL® LR 3003/20 TR A/B transparent transparent 22[1] 22[1] 8,3 N/mm²[2] 8,3 N/mm²[2] 870 %[3] 870 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/30 A/B transparent transparent 30[1] 30[1] 7,0 N/mm²[2] 7,0 N/mm²[2] 610 %[3] 610 %[3] 21 N/mm[4] 21 N/mm[4] 10 %[5] 10 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/30 R A/B transparent transparent 30[1] 30[1] 7,5 N/mm²[2] 7,5 N/mm²[2] 600 %[3] 600 %[3] 20 N/mm[4] 20 N/mm[4] 10 %[5] 10 %[5] Food-contact, Reduced volatile content
ELASTOSIL® LR 3003/40 A/B transparent transparent 40[1] 40[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 610 %[3] 610 %[3] 30 N/mm[4] 30 N/mm[4] 11 %[5] 11 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/50 A/B transparent transparent 50[1] 50[1] 10,3 N/mm²[2] 10,3 N/mm²[2] 490 %[3] 490 %[3] 26 N/mm[4] 26 N/mm[4] 13 %[5] 13 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/60 A/B transparent transparent 60[1] 60[1] 9,8 N/mm²[2] 9,8 N/mm²[2] 340 %[3] 340 %[3] 27 N/mm[4] 27 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/70 A/B transparent transparent 70[1] 70[1] 9,3 N/mm²[2] 9,3 N/mm²[2] 290 %[3] 290 %[3] 20 N/mm[4] 20 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/80 A/B transparent transparent 77[1] 77[1] 8,3 N/mm²[2] 8,3 N/mm²[2] 240 %[3] 240 %[3] 12 N/mm[4] 12 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3004/30 A/B transparent transparent 30[1] 30[1] 7,1 N/mm²[2] 7,1 N/mm²[2] 620 %[3] 620 %[3] 24 N/mm[4] 24 N/mm[4] 10 %[5] 10 %[5] Fast curing, Food-contact, Reduced volatile content
ELASTOSIL® LR 3004/40 A/B transparent transparent 40[1] 40[1] 9,2 N/mm²[2] 9,2 N/mm²[2] 610 %[3] 610 %[3] 29 N/mm[4] 29 N/mm[4] 10 %[5] 10 %[5] Fast curing, Food-contact, Reduced volatile content
ELASTOSIL® LR 3004/50 A/B transparent transparent 50[1] 50[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 480 %[3] 480 %[3] 27 N/mm[4] 27 N/mm[4] 15 %[5] 15 %[5] Fast curing, Food-contact, Reduced volatile content
ELASTOSIL® LR 3004/60 A/B transparent transparent 60[1] 60[1] 9,6 N/mm²[2] 9,6 N/mm²[2] 380 %[3] 380 %[3] 25 N/mm[4] 25 N/mm[4] 18 %[5] 18 %[5] Fast curing, Food-contact, Reduced volatile content
ELASTOSIL® LR 3004/70 A/B transparent transparent 70[1] 70[1] 9,9 N/mm²[2] 9,9 N/mm²[2] 310 %[3] 310 %[3] 20 N/mm[4] 20 N/mm[4] 11 %[5] 11 %[5] Fast curing, Food-contact, Reduced volatile content
ELASTOSIL® LR 3005/30 A/B transparent transparent 30[1] 30[1] 6,0 N/mm²[2] 6,0 N/mm²[2] 610 %[3] 610 %[3] 16 N/mm[4] 16 N/mm[4] 13 %[7] 13 %[7] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/40 A/B transparent transparent 40[1] 40[1] 7,8 N/mm²[2] 7,8 N/mm²[2] 600 %[3] 600 %[3] 22 N/mm[4] 22 N/mm[4] 16 %[7] 16 %[7] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/50 A/B transparent transparent 50[1] 50[1] 8,7 N/mm²[2] 8,7 N/mm²[2] 500 %[3] 500 %[3] 24 N/mm[4] 24 N/mm[4] 15 %[7] 15 %[7] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/60 A/B transparent transparent 60[1] 60[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 380 %[3] 380 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[7] 15 %[7] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/70 A/B transparent transparent 70[1] 70[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 330 %[3] 330 %[3] 23 N/mm[4] 23 N/mm[4] 19 %[7] 19 %[7] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® R 101/25 OH translucent translucent 23[1] 23[1] 7,0 N/mm²[2] 7,0 N/mm²[2] 900 %[3] 900 %[3] 14 N/mm[4] 14 N/mm[4] 13 %[6] 13 %[6] Ultra-low compression set, High rebound resilience, Food-contact
ELASTOSIL® R 101/35 OH translucent translucent 35[1] 35[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 700 %[3] 700 %[3] 16 N/mm[4] 16 N/mm[4] 10 %[6] 10 %[6] Ultra-low compression set, High rebound resilience, Food-contact
ELASTOSIL® R 101/45 OH translucent translucent 47[1] 47[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 540 %[3] 540 %[3] 18 N/mm[4] 18 N/mm[4] 10 %[6] 10 %[6] Ultra-low compression set, High rebound resilience, Food-contact
ELASTOSIL® R 101/65 OH translucent translucent 65[1] 65[1] 8,0 N/mm²[2] 8,0 N/mm²[2] 200 %[3] 200 %[3] 16 N/mm[4] 16 N/mm[4] 10 %[6] 10 %[6] Ultra-low compression set, High rebound resilience, Food-contact
ELASTOSIL® R 401/10 OH transparent transparent 13[1] 13[1] 6,6 N/mm²[2] 6,6 N/mm²[2] 1200 %[3] 1200 %[3] 20 N/mm[4] 20 N/mm[4] 41 %[6] 41 %[6] Food-contact, General purpose
ELASTOSIL® R 401/20 OH transparent transparent 23[1] 23[1] 9,0 N/mm²[2] 9,0 N/mm²[2] 1000 %[3] 1000 %[3] 27 N/mm[4] 27 N/mm[4] 33 %[6] 33 %[6] Food-contact, General purpose
ELASTOSIL® R 401/30 OH transparent transparent 35[1] 35[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 640 %[3] 640 %[3] 19 N/mm[4] 19 N/mm[4] 12 %[6] 12 %[6] Food-contact
ELASTOSIL® R 401/30 S transparent transparent 28[1] 28[1] 10 N/mm²[2] 10 N/mm²[2] 910 %[3] 910 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[6] 15 %[6] Food-contact, General purpose
ELASTOSIL® R 401/40 S transparent transparent 38[1] 38[1] 9,6 N/mm²[2] 9,6 N/mm²[2] 770 %[3] 770 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[6] 16 %[6] Food-contact, General purpose
ELASTOSIL® R 401/50 S transparent transparent 50[1] 50[1] 12,0 N/mm²[2] 12,0 N/mm²[2] 640 %[3] 640 %[3] 27 N/mm[4] 27 N/mm[4] 17 %[6] 17 %[6] Food-contact, General purpose
ELASTOSIL® R 401/55 S transparent transparent 57[1] 57[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 400 %[3] 400 %[3] 19 N/mm[4] 19 N/mm[4] 35 %[6] 35 %[6] Food-contact, General purpose
ELASTOSIL® R 401/60 S transparent transparent 60[1] 60[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 550 %[3] 550 %[3] 26 N/mm[4] 26 N/mm[4] 16 %[6] 16 %[6] Food-contact, General purpose
ELASTOSIL® R 401/70 S transparent transparent 70[1] 70[1] 11,3 N/mm²[2] 11,3 N/mm²[2] 530 %[3] 530 %[3] 31 N/mm[4] 31 N/mm[4] 22 %[6] 22 %[6] Food-contact, General purpose
ELASTOSIL® R 401/80 S transparent transparent 80[1] 80[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 450 %[3] 450 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[6] 41 %[6] Food-contact, General purpose
ELASTOSIL® R 420/30 OH transparent transparent 27[1] 27[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 930 %[3] 930 %[3] 33 N/mm[4] 33 N/mm[4] 21 %[6] 21 %[6] Food-contact, High tear-resistant
ELASTOSIL® R 420/40 S transparent transparent 39[1] 39[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 800 %[3] 800 %[3] 37 N/mm[4] 37 N/mm[4] 24 %[6] 24 %[6] Food-contact, High tear-resistant
ELASTOSIL® R 420/50 S transparent transparent 53[1] 53[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 41 N/mm[4] 41 N/mm[4] 23 %[6] 23 %[6] Food-contact, High tear-resistant
ELASTOSIL® R 420/60 S transparent transparent 62[1] 62[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 660 %[3] 660 %[3] 43 N/mm[4] 43 N/mm[4] 25 %[6] 25 %[6] Food-contact, High tear-resistant
ELASTOSIL® R 420/70 S transparent transparent 72[1] 72[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 570 %[3] 570 %[3] 45 N/mm[4] 45 N/mm[4] 38 %[6] 38 %[6] Food-contact, High tear-resistant
ELASTOSIL® R 752/50 OH translucent translucent 50[1] 50[1] 9,9 N/mm²[2] 9,9 N/mm²[2] 770 %[3] 770 %[3] 32 N/mm[4] 32 N/mm[4] 38 %[6] 38 %[6] High damping
ELASTOSIL® R 752/70 OH translucent translucent 70[1] 70[1] 8,5 N/mm²[2] 8,5 N/mm²[2] 460 %[3] 460 %[3] 22 N/mm[4] 22 N/mm[4] 19 %[6] 19 %[6] High damping
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [7] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A,  [] Suited,  [] Well suited,  [] Ideally suited 

Vorteile:

  • Ausgezeichnete Scherstabilität und Hitzebeständigkeit
  • Konstante rheologische Eigenschaften über einen weiten Temperatur- und Frequenzbereich
  • Verlässliche Funktion während der gesamten Lebensdauer des Dämpfers

Anwendung:

  • Füllmedium für Viskositäts-Drehschwingungsdämpfer (Visko-Dämpfer)

Product Recommendations

Products
Technical data
Product properties
Appearance Product Type Specific Features
WACKER® AK 1 000 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid High viscosity, Heat resistant
WACKER® AK 100 000 STAB colorless, slightly cloudy colorless, slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 150 000 STAB colorless,slightly cloudy colorless,slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 200 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 300 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 500 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid High viscosity, Heat resistant
WACKER® AK 600 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid High viscosity, Heat resistant
Legend
[] Suited,  [] Well suited,  [] Ideally suited 

Vorteile:

  • Konstante Dämpfung bei hohen und niedrigen Temperaturen und in allen Klimazonen der Welt
  • Hervorragende Hitzebeständigkeit
  • Hohe dynamische Belastbarkeit
  • Hohe Weiterreißfestigkeit

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® eco R 401/40 S transparent transparent 41[1] 41[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose
ELASTOSIL® eco R 401/80 S transparent transparent 81[1] 81[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 430 %[3] 430 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[5] 41 %[5] Food-contact, General purpose
ELASTOSIL® R 401/10 OH transparent transparent 13[1] 13[1] 6,6 N/mm²[2] 6,6 N/mm²[2] 1200 %[3] 1200 %[3] 20 N/mm[4] 20 N/mm[4] 41 %[5] 41 %[5] Food-contact, General purpose
ELASTOSIL® R 401/20 OH transparent transparent 23[1] 23[1] 9,0 N/mm²[2] 9,0 N/mm²[2] 1000 %[3] 1000 %[3] 27 N/mm[4] 27 N/mm[4] 33 %[5] 33 %[5] Food-contact, General purpose
ELASTOSIL® R 401/30 OH transparent transparent 35[1] 35[1] 9,5 N/mm²[2] 9,5 N/mm²[2] 640 %[3] 640 %[3] 19 N/mm[4] 19 N/mm[4] 12 %[5] 12 %[5] Food-contact
ELASTOSIL® R 401/30 S transparent transparent 28[1] 28[1] 10 N/mm²[2] 10 N/mm²[2] 910 %[3] 910 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[5] 15 %[5] Food-contact, General purpose
ELASTOSIL® R 401/40 S transparent transparent 38[1] 38[1] 9,6 N/mm²[2] 9,6 N/mm²[2] 770 %[3] 770 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose
ELASTOSIL® R 401/50 S transparent transparent 50[1] 50[1] 12,0 N/mm²[2] 12,0 N/mm²[2] 640 %[3] 640 %[3] 27 N/mm[4] 27 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose
ELASTOSIL® R 401/55 S transparent transparent 57[1] 57[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 400 %[3] 400 %[3] 19 N/mm[4] 19 N/mm[4] 35 %[5] 35 %[5] Food-contact, General purpose
ELASTOSIL® R 401/60 S - - - - - - - - - - - - Food-contact, General purpose
ELASTOSIL® R 401/70 S transparent transparent 70[1] 70[1] 11,3 N/mm²[2] 11,3 N/mm²[2] 530 %[3] 530 %[3] 31 N/mm[4] 31 N/mm[4] 22 %[5] 22 %[5] Food-contact, General purpose
ELASTOSIL® R 401/80 S transparent transparent 80[1] 80[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 450 %[3] 450 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[5] 41 %[5] Food-contact, General purpose
ELASTOSIL® R 420/30 OH transparent transparent 27[1] 27[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 930 %[3] 930 %[3] 33 N/mm[4] 33 N/mm[4] 21 %[5] 21 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/40 S transparent transparent 39[1] 39[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 800 %[3] 800 %[3] 37 N/mm[4] 37 N/mm[4] 24 %[5] 24 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/50 S transparent transparent 53[1] 53[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 730 %[3] 730 %[3] 41 N/mm[4] 41 N/mm[4] 23 %[5] 23 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/60 S transparent transparent 62[1] 62[1] 11,0 N/mm²[2] 11,0 N/mm²[2] 660 %[3] 660 %[3] 43 N/mm[4] 43 N/mm[4] 25 %[5] 25 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/70 S transparent transparent 72[1] 72[1] 10,0 N/mm²[2] 10,0 N/mm²[2] 570 %[3] 570 %[3] 45 N/mm[4] 45 N/mm[4] 38 %[5] 38 %[5] Food-contact, High tear-resistant
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited 

Weitere Informationen