Unser System hat erkannt, dass Sie aus kommen aber die aktuelle Ländereinstellung ist. Wollen Sie dennoch Ihr Land ändern?

Haushalts- und Konsumgüter

Der Einsatz von Siliconen in Küche und Haushalt ist vielfältig: Kaum ein Haushaltsgerät kommt heutzutage ohne Dichtungen, Kabel und Schläuche aus Silicon aus. Aber auch für praktisches Küchenzubehör wie Eiswürfelformen, Teigschaber und Pfannenwender bieten Silicone unschlagbare Vorteile.

ELASTOSIL® Siliconkautschuk ist flexibel und hat gute Trenneigenschaften. Zudem ist er geruchs- und geschmacksneutral und erfüllt die gesetzlichen Anforderungen für den Kontakt mit Lebensmitteln. Deshalb eignet er sich hervorragend für die Herstellung von Küchen-, Koch- und Backutensilien.

Anwendungen:

  • Backzubehör wie Teigschaber und Backformen
  • Kochbesteck und -utensilien wie Schneebesen und Pfannenwender
  • Eiswürfelformen
  • Faltbare Schüsseln

Vorteile:

  • Gute Trenneigenschaften
  • Neutraler Geruch und Geschmack
  • Einfärbbarkeit
  • Konformität mit den FDA Regularien zum Kontakt mit Lebensmitteln

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Compression Set Regulation Product Rheology Specific Features
ELASTOSIL® E50 TRANSPARENT 35[3] 35[3] 1,5 N/mm²[4] 1,5 N/mm²[4] 150 %[5] 150 %[5] 5,0 N/mm[1] 5,0 N/mm[1] 50000 mPa·s[2] 50000 mPa·s[2] - - MIL-A 46106 grade Self-levelling -
ELASTOSIL® eco LR 3003/80 A/B 77[3] 77[3] 8,3 N/mm²[4] 8,3 N/mm²[4] 240 %[5] 240 %[5] 12 N/mm[1] 12 N/mm[1] - - 17 %[6] 17 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/20 TR A/B 22[3] 22[3] 8,3 N/mm²[4] 8,3 N/mm²[4] 870 %[5] 870 %[5] 24 N/mm[1] 24 N/mm[1] - - 17 %[6] 17 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/30 A/B 30[3] 30[3] 7,0 N/mm²[4] 7,0 N/mm²[4] 610 %[5] 610 %[5] 21 N/mm[1] 21 N/mm[1] - - 10 %[6] 10 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/40 A/B 40[3] 40[3] 10,0 N/mm²[4] 10,0 N/mm²[4] 610 %[5] 610 %[5] 30 N/mm[1] 30 N/mm[1] - - 11 %[6] 11 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/50 A/B 50[3] 50[3] 10,3 N/mm²[4] 10,3 N/mm²[4] 490 %[5] 490 %[5] 26 N/mm[1] 26 N/mm[1] - - 13 %[6] 13 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/60 A/B 60[3] 60[3] 9,8 N/mm²[4] 9,8 N/mm²[4] 340 %[5] 340 %[5] 27 N/mm[1] 27 N/mm[1] - - 16 %[6] 16 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/70 A/B 70[3] 70[3] 9,3 N/mm²[4] 9,3 N/mm²[4] 290 %[5] 290 %[5] 20 N/mm[1] 20 N/mm[1] - - 16 %[6] 16 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/80 A/B 77[3] 77[3] 8,3 N/mm²[4] 8,3 N/mm²[4] 240 %[5] 240 %[5] 12 N/mm[1] 12 N/mm[1] - - 17 %[6] 17 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/85 A/B 85[3] 85[3] 6,5 N/mm²[4] 6,5 N/mm²[4] 130 %[5] 130 %[5] 11 N/mm[1] 11 N/mm[1] - - 14 %[6] 14 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/90 A/B 90[3] 90[3] 7,0 N/mm²[4] 7,0 N/mm²[4] 50 %[5] 50 %[5] 8 N/mm[1] 8 N/mm[1] - - 16 %[6] 16 %[6] - - Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3020/60 A/B 60[3] 60[3] 6,1 N/mm²[4] 6,1 N/mm²[4] 280 %[5] 280 %[5] 13 N/mm[1] 13 N/mm[1] - - 10 %[6] 10 %[6] - - Steam resistant, Food-contact, Reduced volatile content, Hot water resistant
ELASTOSIL® LR 3040/30 A/B 30[3] 30[3] 9,8 N/mm²[4] 9,8 N/mm²[4] 740 %[5] 740 %[5] 35 N/mm[1] 35 N/mm[1] - - 14 %[6] 14 %[6] - - Fast curing, Food-contact, High tear-resistant, Reduced volatile content
ELASTOSIL® LR 3040/40 A/B 40[3] 40[3] 9,0 N/mm²[4] 9,0 N/mm²[4] 600 %[5] 600 %[5] 36 N/mm[1] 36 N/mm[1] - - 11 %[6] 11 %[6] - - Fast curing, Food-contact, High tear-resistant, Reduced volatile content
ELASTOSIL® LR 3040/50 A/B 50[3] 50[3] 9,2 N/mm²[4] 9,2 N/mm²[4] 500 %[5] 500 %[5] 40 N/mm[1] 40 N/mm[1] - - 11 %[6] 11 %[6] - - Fast curing, Food-contact, High tear-resistant, Reduced volatile content
ELASTOSIL® LR 3040/60 A/B 60[3] 60[3] 9,4 N/mm²[4] 9,4 N/mm²[4] 380 %[5] 380 %[5] 38 N/mm[1] 38 N/mm[1] - - 15 %[6] 15 %[6] - - Fast curing, Food-contact, High tear-resistant, Reduced volatile content
ELASTOSIL® LR 3040/70 A/B 70[3] 70[3] 8,0 N/mm²[4] 8,0 N/mm²[4] 370 %[5] 370 %[5] 40 N/mm[1] 40 N/mm[1] - - 15 %[6] 15 %[6] - - Fast curing, Food-contact, High tear-resistant, Reduced volatile content
ELASTOSIL® LR 5003/50 A/B 50[3] 50[3] 9,2 N/mm²[4] 9,2 N/mm²[4] 500 %[5] 500 %[5] 27 N/mm[1] 27 N/mm[1] - - - - - - Low volatile, Food-contact
ELASTOSIL® LR 5003/60 A/B 60[3] 60[3] 9,8 N/mm²[4] 9,8 N/mm²[4] 400 %[5] 400 %[5] 30 N/mm[1] 30 N/mm[1] - - - - - - Low volatile, Food-contact
ELASTOSIL® LR 5003/70 A/B 70[3] 70[3] 10,0 N/mm²[4] 10,0 N/mm²[4] 390 %[5] 390 %[5] 28 N/mm[1] 28 N/mm[1] - - - - - - Low volatile, Food-contact
ELASTOSIL® R 755/60 OH 60[3] 60[3] 7,7 N/mm²[4] 7,7 N/mm²[4] 330 %[5] 330 %[5] 16 N/mm[1] 16 N/mm[1] - - 16 %[7] 16 %[7] - - Steam resistant
ELASTOSIL® R 756/40 OH 41[3] 41[3] 8,8 N/mm²[4] 8,8 N/mm²[4] 610 %[5] 610 %[5] 20 N/mm[1] 20 N/mm[1] - - 9 %[7] 9 %[7] - - Heat resistant, Food-contact, Low compression set
ELASTOSIL® R 756/50 OH 47[3] 47[3] 9,5 N/mm²[4] 9,5 N/mm²[4] 540 %[5] 540 %[5] 21 N/mm[1] 21 N/mm[1] - - 9 %[7] 9 %[7] - - Heat resistant, Food-contact, Low compression set
ELASTOSIL® R 756/60 OH 59[3] 59[3] 10,0 N/mm²[4] 10,0 N/mm²[4] 440 %[5] 440 %[5] 23 N/mm[1] 23 N/mm[1] - - 9 %[7] 9 %[7] - - Heat resistant, Food-contact, Low compression set
ELASTOSIL® R 756/70 OH 70[3] 70[3] 10,0 N/mm²[4] 10,0 N/mm²[4] 380 %[5] 380 %[5] 24 N/mm[1] 24 N/mm[1] - - 10 %[7] 10 %[7] - - Heat resistant, Food-contact, Low compression set
ELASTOSIL® R 861/70 S 75[3] 75[3] 8,8 N/mm²[4] 8,8 N/mm²[4] 290 %[5] 290 %[5] 17 N/mm[1] 17 N/mm[1] - - 7 %[7] 7 %[7] - - Ultra-low compression set, Steam resistant, Food-contact, Coolant resistant
ELASTOSIL® R plus 4050/55 58[3] 58[3] 8,4 N/mm²[4] 8,4 N/mm²[4] 400 %[5] 400 %[5] 23 N/mm[1] 23 N/mm[1] - - 6 %[7] 6 %[7] - - Ultra-low compression set, Heat resistant, High rebound resilience, Two-component, Food-contact, Addition Curing
ELASTOSIL® R plus 4050/55 MH 9005 56[3] 56[3] 8,8 N/mm²[4] 8,8 N/mm²[4] 460 %[5] 460 %[5] 23 N/mm[1] 23 N/mm[1] - - 6 %[7] 6 %[7] - - Ultra-low compression set, Heat resistant, High rebound resilience, Food-contact, One-component, Addition Curing
ELASTOSIL® R plus 4350/55 58[3] 58[3] 8,2 N/mm²[4] 8,2 N/mm²[4] 350 %[5] 350 %[5] 18 N/mm[1] 18 N/mm[1] - - 10 %[7] 10 %[7] - - Heat resistant, High rebound resilience, Two-component, Food-contact, Addition Curing
Legend
[1] Tear strength | ASTM D 624 B,  [2] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [3] Hardness Shore A | DIN ISO 48-4,  [4] Tensile strength | ISO 37 type 1,  [5] Elongation at break | ISO 37 type 1,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [7] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited 

Schläuche und Profile für Hausgeräte und Weiße Ware werden aus Festsiliconkautschuk (HTV) im Extrusionsverfahren produziert. Flüssigsiliconkautschuk (LSR) wird im Spritzguss zu Formteilen jeglicher Art verarbeitet.

Anwendungen:

  • Profile für Ofentüren
  • Kaffeemaschinenschläuche
  • Lebensmittelschläuche
  • Dichtungen

Vorteile:

  • Multifunktional
  • Hoher Weiterreißwiderstand
  • Niedriger Druckverformungsrest
  • Hohe Elastizität
  • Niedriger Gleitreibungskoeffizient
  • Hohe Hitzebeständigkeit

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Compression Set Hardness Shore 00 Resistance Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® E43 N TRANSPARENT 30[1] 30[1] 7,8 N/mm²[3] 7,8 N/mm²[3] 450 %[5] 450 %[5] - - - - - - - - - - Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT 35[1] 35[1] 2,6 N/mm²[3] 2,6 N/mm²[3] 200 %[5] 200 %[5] - - - - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® E50 TRANSPARENT 35[1] 35[1] 1,5 N/mm²[3] 1,5 N/mm²[3] 150 %[5] 150 %[5] 5,0 N/mm[7] 5,0 N/mm[7] 50000 mPa·s[8] 50000 mPa·s[8] - - - - - MIL-A 46106 grade Self-levelling - - -
ELASTOSIL® E6 N CSC 32[1] 32[1] 2 N/mm²[3] 2 N/mm²[3] 150 %[5] 150 %[5] - - - - - - - - Provides excellent water repellency Solvent-free - - - -
ELASTOSIL® LR 3003/30 R A/B 30[1] 30[1] 7,5 N/mm²[3] 7,5 N/mm²[3] 600 %[5] 600 %[5] 20 N/mm[7] 20 N/mm[7] - - 10 %[9] 10 %[9] - - - - - Food-contact, Reduced volatile content - -
ELASTOSIL® R plus 4050/55 MH 9005 56[1] 56[1] 8,8 N/mm²[3] 8,8 N/mm²[3] 460 %[5] 460 %[5] 23 N/mm[7] 23 N/mm[7] - - 6 %[10] 6 %[10] - - - - - Ultra-low compression set, Heat resistant, High rebound resilience, Food-contact, One-component, Addition Curing - -
ELASTOSIL® SC 870 A/B 8 - 12[2] 8 - 12[2] 350 kPa[4] 350 kPa[4] 100 %[6] 100 %[6] - - - - - - 40 - 60[11] 40 - 60[11] Heat resistant - Thixotropic - Two-component, Addition Curing Foam, Compressible
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Hardness Shore A | DIN ISO 48-4 | (with skin),  [3] Tensile strength | ISO 37 type 1,  [4] Tensile strength | ISO 1798,  [5] Elongation at break | ISO 37 type 1,  [6] Elongation at break | ISO 1798,  [7] Tear strength | ASTM D 624 B,  [8] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [9] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [10] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [11] Hardness Shore 00 (with skin) | ASTM D 2240,  [] Suited,  [] Well suited,  [] Ideally suited