Unser System hat erkannt, dass Sie aus kommen aber die aktuelle Ländereinstellung ist. Wollen Sie dennoch Ihr Land ändern?

Hausgeräteindustrie

Die besonderen Eigenschaften von Siliconen zeichnen die Produkte der Marke ELASTOSIL® als besonders geeignet für hochwertige Anwendungen aus, wie bspw. in „Weißer Ware“/Haushaltsgeräte, Klein- und Küchengeräte. Je nach Anwendung sind entweder raumtemperaturvernetzende oder bei Wärmeeinwirkung aushärtende Siliconelastomere die ideale Wahl.

Vorteile:

  • Hitzebeständigkeit (bis zu 300 °C)
  • chemische Beständigkeit
  • strahlungsbeständig (vom Mikrowellen- bis zum UV-Bereich)
  • dauerhafte Elastizität (–45 °C bis über 200 °C)
  • ökologische und physiologische Unbedenklichkeit

Anwendungen:

  • Geschirrspüler
  • Backofentüren
  • Waschmaschinen
  • Kochflächen
  • Kühlschränke

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Viscosity, dynamic Weiterreißwiderstand Tear strength Compression Set Resistance Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® E41 TRANSPARENT - - 40[6] 40[6] 6,0 N/mm²[7] 6,0 N/mm²[7] 350 %[10] 350 %[10] 100000 mPa·s[3] 100000 mPa·s[3] 11,5 N/mm[1] 11,5 N/mm[1] - - - - - - Self-levelling - - -
ELASTOSIL® E43 N BLACK - - 30[6] 30[6] 7,5 N/mm²[8] 7,5 N/mm²[8] 500 %[11] 500 %[11] - - - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 N TRANSPARENT - - 30[6] 30[6] 7,8 N/mm²[8] 7,8 N/mm²[8] 450 %[11] 450 %[11] - - - - - - - - - - Thixotropic - - -
ELASTOSIL® E43 SCHWARZ - - 30[6] 30[6] 6,5 N/mm²[9] 6,5 N/mm²[9] 500 %[12] 500 %[12] 250000 mPa·s[4] 250000 mPa·s[4] 11,5 N/mm[1] 11,5 N/mm[1] - - - - - Solvent-free - - - -
ELASTOSIL® E43 TRANSPARENT - - 30[6] 30[6] 6,50 N/mm²[7] 6,50 N/mm²[7] 500 %[10] 500 %[10] 250000 mPa·s[5] 250000 mPa·s[5] 11,5 N/mm[1] 11,5 N/mm[1] - - - - - Solvent-free - - - -
ELASTOSIL® E47 TRANSPARENT - - 37[6] 37[6] 4,5 N/mm²[9] 4,5 N/mm²[9] 450 %[12] 450 %[12] 600000 mPa·s[5] 600000 mPa·s[5] 10 N/mm[1] 10 N/mm[1] - - - - - MIL-A 46106 grade Non-slump, Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT - - 35[6] 35[6] 2,6 N/mm²[8] 2,6 N/mm²[8] 200 %[11] 200 %[11] - - - - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® LR 3003/30 R A/B transparent transparent 30[6] 30[6] 7,5 N/mm²[8] 7,5 N/mm²[8] 600 %[11] 600 %[11] - - 20 N/mm[1] 20 N/mm[1] - - 10 %[13] 10 %[13] - - - Food-contact, Reduced volatile content - -
ELASTOSIL® RT 702 - - 40[6] 40[6] 6,1 N/mm²[8] 6,1 N/mm²[8] 500 %[11] 500 %[11] - - 10,1[1] 10,1[1] - - - - Heat resistant - Thixotropic - One-component Self-adhesive
ELASTOSIL® RT 771 - - 45[6] 45[6] 1 N/mm²[8] 1 N/mm²[8] 180 %[11] 180 %[11] - - - - - - - - Media resistant - Shear thinning, Thixotropic - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 - - 32[6] 32[6] 2,0 N/mm²[8] 2,0 N/mm²[8] 130 %[11] 130 %[11] - - 3,8 N/mm[1] 3,8 N/mm[1] - - - - Heat resistant, Steam resistant - - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 773 - - 35[6] 35[6] 1,2 N/mm²[8] 1,2 N/mm²[8] 75 %[11] 75 %[11] - - - - 4,7 N/mm[2] 4,7 N/mm[2] - - Media resistant - Shear thinning, Thixotropic, Non-slump - Condensation-curing, Two-component Self-adhesive, Compressible, Low density, Electrically insulating
ELASTOSIL® RT 778 - - 50[6] 50[6] 3,5 N/mm²[8] 3,5 N/mm²[8] 120 %[11] 120 %[11] - - - - 7,0[2] 7,0[2] - - Heat resistant - Shear thinning, Non-slump - Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] Tear strength | ASTM D 624 B,  [3] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [4] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [5] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [6] Hardness Shore A | DIN ISO 48-4,  [7] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [8] Tensile strength | ISO 37 type 1,  [9] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [10] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [11] Elongation at break | ISO 37 type 1,  [12] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [13] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited 

Vorteile:

  • Hitzebeständigkeit (bis zu 300 °C)
  • selbstklebende Eigenschaften
  • chemische Beständigkeit
  • Strahlungsbeständigkeit (vom Mikrowellen- bis zum UV-Bereich)
  • dauerhafte Elastizität (–45 °C bis über 200 °C)
  • neutral in Geruch und Geschmack

Anwendungen:

  • Dampfbügeleisen und Bügelstationen
  • Mikrowellen
  • Kaffeemaschinen
  • Wasserkocher
  • Reiskocher

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Weiterreißwiderstand Resistance Regulation Product Rheology Crosslinking Property Vulcanizate
ELASTOSIL® A07 TRANSLUCENT 20[10] 20[10] 1,5 N/mm²[12] 1,5 N/mm²[12] 300 %[16] 300 %[16] - - 8000 mPa·s[4] 8000 mPa·s[4] 4,0 N/mm[1] 4,0 N/mm[1] - Solvent-based Flowable - -
ELASTOSIL® A234 WHITE 35[10] 35[10] 2,5 N/mm²[12] 2,5 N/mm²[12] 200 %[16] 200 %[16] - - 25000 mPa·s[5] 25000 mPa·s[5] 3,5 N/mm[1] 3,5 N/mm[1] Heat resistant - - - -
ELASTOSIL® E 952 30[11] 30[11] 6,2 N/mm²[13] 6,2 N/mm²[13] 600 %[17] 600 %[17] - - - 11,5 N/mm[2] 11,5 N/mm[2] - - - - -
ELASTOSIL® E41 TRANSPARENT 40[10] 40[10] 6,0 N/mm²[14] 6,0 N/mm²[14] 350 %[18] 350 %[18] - - 100000 mPa·s[7] 100000 mPa·s[7] 11,5 N/mm[1] 11,5 N/mm[1] - - Self-levelling - -
ELASTOSIL® E43 N BLACK 30[10] 30[10] 7,5 N/mm²[12] 7,5 N/mm²[12] 500 %[16] 500 %[16] - - - - - - - - Thixotropic - -
ELASTOSIL® E43 N TRANSPARENT 30[10] 30[10] 7,8 N/mm²[12] 7,8 N/mm²[12] 450 %[16] 450 %[16] - - - - - - - - Thixotropic - -
ELASTOSIL® E43 SCHWARZ 30[10] 30[10] 6,5 N/mm²[15] 6,5 N/mm²[15] 500 %[19] 500 %[19] - - 250000 mPa·s[5] 250000 mPa·s[5] 11,5 N/mm[1] 11,5 N/mm[1] - Solvent-free - - -
ELASTOSIL® E43 TRANSPARENT 30[10] 30[10] 6,50 N/mm²[14] 6,50 N/mm²[14] 500 %[18] 500 %[18] - - 250000 mPa·s[8] 250000 mPa·s[8] 11,5 N/mm[1] 11,5 N/mm[1] - Solvent-free - - -
ELASTOSIL® E47 TRANSPARENT 37[10] 37[10] 4,5 N/mm²[15] 4,5 N/mm²[15] 450 %[19] 450 %[19] - - 600000 mPa·s[8] 600000 mPa·s[8] 10 N/mm[1] 10 N/mm[1] - MIL-A 46106 grade Non-slump, Thixotropic - -
ELASTOSIL® E50 N TRANSPARENT 35[10] 35[10] 2,6 N/mm²[12] 2,6 N/mm²[12] 200 %[16] 200 %[16] - - - - - - - MIL-A 46106 grade - - -
ELASTOSIL® E50 TRANSPARENT 35[10] 35[10] 1,5 N/mm²[12] 1,5 N/mm²[12] 150 %[16] 150 %[16] - - 50000 mPa·s[9] 50000 mPa·s[9] 5,0 N/mm[1] 5,0 N/mm[1] - MIL-A 46106 grade Self-levelling - -
ELASTOSIL® RT 705 42[10] 42[10] 3,0 N/mm²[12] 3,0 N/mm²[12] 180 %[16] 180 %[16] 4,6 N/mm[3] 4,6 N/mm[3] - - - - Steam resistant, Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 706 32[10] 32[10] 1,9 N/mm²[12] 1,9 N/mm²[12] 180 %[16] 180 %[16] 3,2 N/mm[3] 3,2 N/mm[3] - - - - Steam resistant, Heat resistant - - One-component Self-adhesive
ELASTOSIL® RT 707 W 45[10] 45[10] 3,5 N/mm²[12] 3,5 N/mm²[12] 200 %[16] 200 %[16] - - - - - - Steam resistant, Heat resistant - - One-component Self-adhesive
ELASTOSIL® RT 708 42[10] 42[10] 4,0 N/mm²[12] 4,0 N/mm²[12] 250 %[16] 250 %[16] 6,3 N/mm[3] 6,3 N/mm[3] - - - - Steam resistant, Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 771 45[10] 45[10] 1 N/mm²[12] 1 N/mm²[12] 180 %[16] 180 %[16] - - - - - - Media resistant - Shear thinning, Thixotropic Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 32[10] 32[10] 2,0 N/mm²[12] 2,0 N/mm²[12] 130 %[16] 130 %[16] 3,8 N/mm[3] 3,8 N/mm[3] - - - - Heat resistant, Steam resistant - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 778 50[10] 50[10] 3,5 N/mm²[12] 3,5 N/mm²[12] 120 %[16] 120 %[16] 7,0[3] 7,0[3] - - - - Heat resistant - Shear thinning, Non-slump Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] Weiterreißwiderstand | ASTM D 624,  [3] Tear strength | ASTM D 624 B,  [4] Viscosity, dynamic | 23 °C | DIN EN ISO 2555 | Brookfield: spindle 3, 5 rpm,  [5] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [7] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [8] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [9] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [10] Hardness Shore A | DIN ISO 48-4,  [11] Hardness Shore A | DIN 53 505 / ISO 868,  [12] Tensile strength | ISO 37 type 1,  [13] Tensile strength | DIN 53504 S1 / ISO 37,  [14] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [15] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [16] Elongation at break | ISO 37 type 1,  [17] Elongation at break | DIN 53504 S1 / ISO 37,  [18] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [19] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [] Suited,  [] Well suited,  [] Ideally suited