Our system has noticed that you are based in United States, but the current country setting is United Arab Emirates. Do you still want to change your country?

Renders & Plasters

Hydrophobicity is a key characteristic for increased weather resistance.

WACKER offers binders and additives for a variety of plasters, including cement-bound, silicone resinbound and ready-to-use dispersion-based plasters. WACKER products improve important characteristics of plasters and renders such as workability, adhesion, flexibility, mechanical resistance, hydrophobicity or weatherability.

By improving the cohesion and flexibility of the hardened mortar, VINNAPAS® provides plasters with an improved impact and crack resistance.

VINNAPAS® dispersible polymer powders improve the quality and increase the life expectancy of renders and plasters. They enhance adhesion on a variety of different substrates and reduce the cracking tendency. They improve the workability of the fresh plaster and allow a good water-vapor permeability of the hardened plaster. Specific VINNAPAS® dispersible polymer powder grades are available to increase hydrophobicity and prevent weathering damages.

Benefits:

  • Improved adhesion to a variety of different substrates
  • Improved abrasion resistance
  • Enhanced hydrophobicity (using a VINNAPAS® H class polymer powder)
  • Very good weatherability
  • Improved impact resistance
  • Low cracking tendency

Application Spectrum:

  • Indoor walls
  • Facades

Product Recommendations

Table is scrollable
Products
Technical data
Mineral Renders & Plasters
Minimum film forming temperature
Tensile Adhesion Strength
Hydrophobicity
VINNAPAS® 4419 E (Scale-up Product) 4 °C[1] 39.2 °F[1] - -
VINNAPAS® 5010 N (GER) 4 °C[1] 39.2 °F[1] Excellent neutral
VINNAPAS® 5044 N (GER) 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 5044 N (ULS) 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 5048 H 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 5518 H 4 °C[1] 39.2 °F[1] Excellent Good
VINNAPAS® 7031 H 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 7034 E 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 8031 H 0 °C[1] 32.0 °F[1] Excellent Very good
VINNAPAS® 8034 H 0 °C[1] 32.0 °F[1] Excellent Excellent
Legend
[1] Minimum film forming temperature | DIN ISO 2115,  [] Suited,  [] Well suited,  [] Ideally suited 

VINNAPAS® polymer dispersions improve the characteristics of sythetic resin-bound, ready-to-use renders and plasters.

Benefits:

  • Optimum workability
  • Optimum application safety
  • Hydrophobic properties
  • Control of open time
  • Reduced dirt-pick up
  • Possibility for a wide color range

Product Recommendations

Table is scrollable
Products
Technical data
Solids content Viscosity, dynamic Glass transition temperature
PRIMIS® SAF 9800 41 - 43 % 41 - 43 % 50 - 500 mPa·s 50 - 500 mPa·s approx. 17 °C[1] approx. 62.6 °F[1]
VINNAPAS® CEF 52 59 - 61 % 59 - 61 % 3000 - 8000 mPa·s 3000 - 8000 mPa·s approx. 14 °C[2] approx. 57.2 °F[2]
Legend
[1] Glass transition temperature | specific method,  [2] Glass transition temperature Tg DSC | specific method,  [] Suited,  [] Well suited,  [] Ideally suited 

VINNAPAS® polymer binders improve the adhesion, flexibility and workability of skim coat. The results are increased adhesion of paints as well as weathering resistance and longevity of building facades.

Benefits:

  • Enhanced flexibility
  • Long lasting hydrophobicity
  • Smooth surface for efficient paint coverage
  • Durability of facades
  • Excellent bonding on different substrates
  • Very good bonding of the color

Application Spectrum:

  • Interior and exterior applications
  • All types of substrates: concrete, lightweight concrete, block work, bricks, AAC blocks, rendered surfaces, cement fiber board, etc.

Product Recommendations

Table is scrollable
Products
Technical data
Skim Coat
Minimum film forming temperature
Tensile Adhesion Strength
Hydrophobicity
Paint Adhesion
Chalking Resistance
VINNAPAS® 4023 N (GER) 1 °C[1] 33.8 °F[1] - - - -
VINNAPAS® 4115 N (GER) 4 °C[1] 39.2 °F[1] Very good neutral Very good Very good
VINNAPAS® 4115 N (KOR) 4 °C[1] 39.2 °F[1] Very good neutral Very good Very good
VINNAPAS® 5010 N (GER) 4 °C[1] 39.2 °F[1] Excellent neutral Excellent Excellent
VINNAPAS® 5010 N (KOR) 4 °C[1] 39.2 °F[1] Excellent neutral Excellent Excellent
VINNAPAS® 5043 N 0 °C[1] 32.0 °F[1] Very good neutral Excellent Excellent
VINNAPAS® 5044 N (GER) 0 °C[1] 32.0 °F[1] Very good neutral Excellent Excellent
VINNAPAS® 5044 N (ULS) 0 °C[1] 32.0 °F[1] Very good neutral Excellent Excellent
VINNAPAS® 5518 H 4 °C[1] 39.2 °F[1] Excellent Very good Very good Excellent
VINNAPAS® 8031 H 0 °C[1] 32.0 °F[1] - - - -
VINNAPAS® 8034 H 0 °C[1] 32.0 °F[1] Very good Excellent Very good Very good
Legend
[1] Minimum film forming temperature | DIN ISO 2115,  [] Suited,  [] Well suited,  [] Ideally suited 

VINNAPAS® polymer binders are used in thermal insulation renders to improve the adhesion as well es the overall performance.

Thermal insulation renders are applied 2 - 10 cm thick according to the required insulation performance. The thermal insulation render is topped with a 3 - 5 mm thick reinforcement layer and a 1.5 - 3 mm thick top coat.

Benefits:

  • Improved adhesion between the mineral binder and the light-weight components (EPS)
  • Increased adhesion to the substrate and the top render
  • Better workability
  • Higher flexibility
  • Optimized tensile adhesive and flexural strength
  • On-demand water repellency and thixotropy

Product Recommendations

Table is scrollable
Products
Technical data
Thermal Insulation Renders
Minimum film forming temperature
Hydrophobicity
Tensile Adhesion Strength
VINNAPAS® 4115 N (GER) 4 °C[1] 39.2 °F[1] neutral Very good
VINNAPAS® 4115 N (KOR) 4 °C[1] 39.2 °F[1] - -
VINNAPAS® 5010 N (GER) 4 °C[1] 39.2 °F[1] neutral Excellent
VINNAPAS® 5043 N 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 5044 N (ULS) 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 5048 H 0 °C[1] 32.0 °F[1] - -
VINNAPAS® 8031 H 0 °C[1] 32.0 °F[1] Very good Good
VINNAPAS® 8034 H 0 °C[1] 32.0 °F[1] Excellent Good
Legend
[1] Minimum film forming temperature | DIN ISO 2115,  [] Suited,  [] Well suited,  [] Ideally suited 

For water-based plasters WACKER offers CAVAMAX® / CAVASOL® essential oil complexes, consisting of an essential oil or one of its components encapsulated in a cyclodextrin. Under the action of moisture, the volatile guest is released from its molecular inclusion complex, which can be used for fragrancing the product, or adding additional functional features to the plaster, e.g. preservation of insect repellency.

Product Recommendations

Sorry, no results are available for your filter criteria and selected country. Please contact one of our sales offices.