Our system has noticed that you are based in United States, but the current country setting is United Arab Emirates. Do you still want to change your country?

Cable Sleevings

Coating electrical insulation tubes with WACKER ELASTOSIL® LR optimizes abrasion resistance properties.

Benefits

  • Better abrasion resistance
  • Better electrical insulation
  • Better thermal stability
  • Optimized flame resistance
  • Permanent flexibility
  • Coloring as desired

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® LR 3003/50 A/B transparent transparent 50[1] 50[1] 10.3 N/mm²[2] 10.3 N/mm²[2] 490 %[3] 490 %[3] 26 N/mm[4] 26 N/mm[4] 13 %[5] 13 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3153 A/B translucent translucent 60[1] 60[1] 7.5 N/mm²[2] 7.5 N/mm²[2] 170 %[3] 170 %[3] 14 N/mm[4] 14 N/mm[4] - - Low volatile
ELASTOSIL® LR 6240 A/B transparent transparent 30[1] 30[1] 1.7 N/mm²[2] 1.7 N/mm²[2] 290 %[3] 290 %[3] 4.9 N/mm[4] 4.9 N/mm[4] - - -
ELASTOSIL® LR 6250 F TRANSPARENT transparent transparent 36[1] 36[1] 5.0 N/mm²[2] 5.0 N/mm²[2] 350 %[3] 350 %[3] 10 N/mm[4] 10 N/mm[4] - - -
ELASTOSIL® LR 6260 A/B ivory ivory 39[1] 39[1] 5.1 N/mm²[2] 5.1 N/mm²[2] 380 %[3] 380 %[3] 8.9 N/mm[4] 8.9 N/mm[4] - - -
ELASTOSIL® R 401/50 S transparent transparent 50[1] 50[1] 12.0 N/mm²[2] 12.0 N/mm²[2] 640 %[3] 640 %[3] 27 N/mm[4] 27 N/mm[4] 17 %[6] 17 %[6] Food-contact, General purpose
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited