Our system has noticed that you are based in United States, but the current country setting is Australia. Do you still want to change your country?

Moldmaking with Silicones: Quick Guides for Better Results

Welcome to the Moldmaking Laboratory. Our experts have recorded short videos that deal with typical questions. These quick guides are just a few minutes long and show how you can easily achieve even better results when using ELASTOSIL® M.

Addition-curing ELASTOSIL® M products combine extremely accurate details with maximum dimensional stability. They do not shrink on curing, as shown in this video.

Condensation-curing ELASTOSIL® M products shrink by 0.2 – 0.8% during curing. While a faithful reproduction, the mold is not 100% dimensionally accurate.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

You’ll find basic information in our article: “ Moldmaking and Prototyping: Here’s How to Find the Right Moldmaking Compound”

Addition-curing ELASTOSIL® M products don’t shrink and are therefore extremely accurate. But curing can be inhibited by a variety of ambient substances. If you find the mold cures inadequately or not at all, check the surrounding area for the following substances in particular:

  • Sulfur and sulfur-containing materials, such as EPDM, amines or urethanes
  • Amine-containing materials, such as PU and amine-cured epoxy resins
  • Organometallic or organotin substances
  • Tin-based catalysts for condensation-curing silicone rubber compounds

Sometimes it is enough not to wear latex gloves and to ensure that the surrounding area is very clean.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

Antistatic ELASTOSIL® RT products stop dust from accumulating on the silicone pad and avoid splatters or droplets of paint that might otherwise be produced as a result of electrostatic charging.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

For more information on ELASTOSIL® products for pad printing, visit our product page or read the flyer.

ELASTOSIL® M products enjoy excellent self-deaerating properties. In typical standard applications, these materials produce bubble-free results without requiring further measures.

It is advisable to use a vacuum pump whenever your work involves skin molds, closed molds or relatively high-viscosity silicone rubber compounds.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

All ELASTOSIL® M products can be colored using ELASTOSIL® pigment pastes. Translucent grades make it easier to obtain color-fast results based on tailored color scales. Food-grade colors are available.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

For further information, visit our product page or read our flyer.

The flexibility and mechanical strength of standard ELASTOSIL® M products ensures sufficient mold release for typical applications.

But if the articles to be molded incorporate undercuts or sharp edges, you should choose products with increased tear strength. Excellent mechanical properties are likewise beneficial if you are planning to make a large number of copies.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

Free-flowing addition-curing ELASTOSIL® M products easily become spreadable and non-sag grades thanks to the addition of WACKER Stabilizer 43.

In the case of condensation-curing ELASTOSIL® M products, use WACKER Thixotropic Agent C.

To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.

You will find other useful information about processing, selection and troubleshooting in our interactive PDF (see downloads), in other articles (see “Related Articles”) and in the product portal under “Moldmaking and Prototype Molding”.

You will find further articles on the topic of moldmaking with ELASTOSIL® M using the “Moldmaking and Prototype Molding” tag.

Related Articles

Related:
Composites ELASTOSIL® Mold Making & Prototype Molding Silicone Rubber

Related WACKER ACADEMY Events

Baking Tray Coating

Middle East and Africa (Dubai) | Instructor-led training | Customers

Through presentations and small case studies, this course will familiarize you with the usage of silicone for baking tray coatings.

Details

Extrusion of HCR Silicone Rubber

China (Shanghai) | Instructor-led training | Distributors, Customers

This course will present applications of organic silicone elastomers in the field of HCR (high-consistency silicone rubber) and important issues concerning HCR extrusion. We will also share our experience with extrusion technology from the Shanghai Rubber Research Institute.

Details

LSR Processing and Molding

USA (Ann Arbor, Allentown, Dalton) | Instructor-led training | Distributors, Customers

This course will give you an overview of processing and molding using liquid silicone rubber.

Details