Our system has noticed that you are based in United States, but the current country setting is Bosnia and Herzegovina. Do you still want to change your country?

Connector Seals

The physical, mechanical and insulating properties of ELASTOSIL® silicone rubber grades make them the ideal choice for automotive electrical connectors. Their excellent chemical resistance, flawless insulation and thermal cycling resistance ensure that power is delivered where it's needed – safely and reliably.

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® LR 3003/20 TR A/B transparent transparent 22[1] 22[1] 8.3 N/mm²[2] 8.3 N/mm²[2] 870 %[3] 870 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/30 A/B transparent transparent 30[1] 30[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 610 %[3] 610 %[3] 21 N/mm[4] 21 N/mm[4] 10 %[5] 10 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/40 A/B transparent transparent 40[1] 40[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 610 %[3] 610 %[3] 30 N/mm[4] 30 N/mm[4] 11 %[5] 11 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/50 A/B transparent transparent 50[1] 50[1] 10.3 N/mm²[2] 10.3 N/mm²[2] 490 %[3] 490 %[3] 26 N/mm[4] 26 N/mm[4] 13 %[5] 13 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/60 A/B transparent transparent 60[1] 60[1] 9.8 N/mm²[2] 9.8 N/mm²[2] 340 %[3] 340 %[3] 27 N/mm[4] 27 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3003/70 A/B transparent transparent 70[1] 70[1] 9.3 N/mm²[2] 9.3 N/mm²[2] 290 %[3] 290 %[3] 20 N/mm[4] 20 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose, Reduced volatile content
ELASTOSIL® LR 3005/30 A/B transparent transparent 30[1] 30[1] 6.0 N/mm²[2] 6.0 N/mm²[2] 610 %[3] 610 %[3] 16 N/mm[4] 16 N/mm[4] 13 %[6] 13 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/40 A/B transparent transparent 40[1] 40[1] 7.8 N/mm²[2] 7.8 N/mm²[2] 600 %[3] 600 %[3] 22 N/mm[4] 22 N/mm[4] 16 %[6] 16 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/50 A/B transparent transparent 50[1] 50[1] 8.7 N/mm²[2] 8.7 N/mm²[2] 500 %[3] 500 %[3] 24 N/mm[4] 24 N/mm[4] 15 %[6] 15 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/60 A/B transparent transparent 60[1] 60[1] 9.5 N/mm²[2] 9.5 N/mm²[2] 380 %[3] 380 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[6] 15 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3005/70 A/B transparent transparent 70[1] 70[1] 8.5 N/mm²[2] 8.5 N/mm²[2] 330 %[3] 330 %[3] 23 N/mm[4] 23 N/mm[4] 19 %[6] 19 %[6] Fast curing, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3065/30 A/B transparent transparent 30[1] 30[1] 7.5 N/mm²[2] 7.5 N/mm²[2] 650 %[3] 650 %[3] 24 N/mm[4] 24 N/mm[4] 17 %[6] 17 %[6] Low compression set without post-cure, Low coefficient of friction, Reduced volatile content
ELASTOSIL® LR 3065/50 A/B transparent transparent 50[1] 50[1] 9.0 N/mm²[2] 9.0 N/mm²[2] 460 %[3] 460 %[3] 31 N/mm[4] 31 N/mm[4] 15 %[6] 15 %[6] Low compression set without post-cure, Low coefficient of friction, Reduced volatile content
ELASTOSIL® LR 3072/30 A/B opaque opaque 30[1] 30[1] 7.4 N/mm²[2] 7.4 N/mm²[2] 710 %[3] 710 %[3] 17 N/mm[4] 17 N/mm[4] 27 %[7] 27 %[7] Self-adhesive, Oil bleeding
ELASTOSIL® LR 3072/40 A/B opaque opaque 40[1] 40[1] 8.8 N/mm²[2] 8.8 N/mm²[2] 620 %[3] 620 %[3] 21 N/mm[4] 21 N/mm[4] 21 %[7] 21 %[7] Self-adhesive, Oil bleeding
ELASTOSIL® LR 3072/50 A/B opaque opaque 50[1] 50[1] 8.6 N/mm²[2] 8.6 N/mm²[2] 510 %[3] 510 %[3] 23 N/mm[4] 23 N/mm[4] 12 %[7] 12 %[7] Self-adhesive, Oil bleeding
ELASTOSIL® LR 3675/30 A/B transparent transparent 30[1] 30[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 760 %[3] 760 %[3] 25 N/mm[4] 25 N/mm[4] 14 %[7] 14 %[7] Self-adhesive, Low coefficient of friction
ELASTOSIL® LR 3675/50 A/B transparent transparent 50[1] 50[1] 7.8 N/mm²[2] 7.8 N/mm²[2] 410 %[3] 410 %[3] 33 N/mm[4] 33 N/mm[4] 12 %[7] 12 %[7] Self-adhesive, Low coefficient of friction
ELASTOSIL® LR 3803/50 A/B opaque opaque 50[1] 50[1] 7.4 N/mm²[2] 7.4 N/mm²[2] 460 %[3] 460 %[3] 39 N/mm[4] 39 N/mm[4] 10 %[6] 10 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3814/30 A/B off-white off-white 30[1] 30[1] 6.8 N/mm²[2] 6.8 N/mm²[2] 680 %[3] 680 %[3] 20 N/mm[4] 20 N/mm[4] 18 %[6] 18 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3814/50 A/B off-white off-white 50[1] 50[1] 8.2 N/mm²[2] 8.2 N/mm²[2] 450 %[3] 450 %[3] 34 N/mm[4] 34 N/mm[4] 15 %[6] 15 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3833/50 A/B white white 50[1] 50[1] 7.5 N/mm²[2] 7.5 N/mm²[2] 460 %[3] 460 %[3] 38 N/mm[4] 38 N/mm[4] 7 %[6] 7 %[6] Ultra-low compression set, Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3841/50 A/B opaque opaque 50[1] 50[1] 9.0 N/mm²[2] 9.0 N/mm²[2] 490 %[3] 490 %[3] 30 N/mm[4] 30 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/40 A/B opaque opaque 40[1] 40[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 610 %[3] 610 %[3] 25 N/mm[4] 25 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/50 A/B opaque opaque 50[1] 50[1] 8.5 N/mm²[2] 8.5 N/mm²[2] 460 %[3] 460 %[3] 37 N/mm[4] 37 N/mm[4] 12 %[6] 12 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/60 A/B opaque opaque 60[1] 60[1] 9.2 N/mm²[2] 9.2 N/mm²[2] 420 %[3] 420 %[3] 32 N/mm[4] 32 N/mm[4] 13 %[6] 13 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3842/70 A/B opaque opaque 68[1] 68[1] 8.5 N/mm²[2] 8.5 N/mm²[2] 350 %[3] 350 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[6] 16 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3843/30 A/B opaque opaque 30[1] 30[1] 8.0 N/mm²[2] 8.0 N/mm²[2] 680 %[3] 680 %[3] 22 N/mm[4] 22 N/mm[4] 16 %[6] 16 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3844/30 A/B opaque opaque 30[1] 30[1] 7.2 N/mm²[2] 7.2 N/mm²[2] 700 %[3] 700 %[3] 22 N/mm[4] 22 N/mm[4] 15 %[6] 15 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3844/50 A/B opaque opaque 50[1] 50[1] 8.5 N/mm²[2] 8.5 N/mm²[2] 500 %[3] 500 %[3] 36 N/mm[4] 36 N/mm[4] 14 %[6] 14 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3846/20 A/B opaque opaque 21[1] 21[1] 6.1 N/mm²[2] 6.1 N/mm²[2] 800 %[3] 800 %[3] 16 N/mm[4] 16 N/mm[4] 16 %[6] 16 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3846/30 A/B opaque opaque 30[1] 30[1] 7.0 N/mm²[2] 7.0 N/mm²[2] 750 %[3] 750 %[3] 19 N/mm[4] 19 N/mm[4] 15 %[6] 15 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3856/20 A/B opaque opaque 21[1] 21[1] 6.2 N/mm²[2] 6.2 N/mm²[2] 850 %[3] 850 %[3] 16 N/mm[4] 16 N/mm[4] 18 %[6] 18 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® LR 3856/30 A/B opaque opaque 32[1] 32[1] 6.5 N/mm²[2] 6.5 N/mm²[2] 600 %[3] 600 %[3] 25 N/mm[4] 25 N/mm[4] 14 %[6] 14 %[6] Fast curing, Oil bleeding, Low compression set without post-cure, Reduced volatile content
ELASTOSIL® R plus 4806/20 MH - - 23[1] 23[1] 6.3 N/mm²[2] 6.3 N/mm²[2] 880 %[3] 880 %[3] 15 N/mm[4] 15 N/mm[4] 14 %[8] 14 %[8] Oil bleeding, One-component, Addition Curing
ELASTOSIL® R plus 4846/30 MH - - 30[1] 30[1] 10.8 N/mm²[2] 10.8 N/mm²[2] 1100 %[3] 1100 %[3] 34 N/mm[4] 34 N/mm[4] 19 %[8] 19 %[8] Oil bleeding, One-component, Addition Curing
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [6] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A,  [7] Compression Set | 22 h | 125 °C | DIN ISO 815-1 type B method A,  [8] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited