Our system has noticed that you are based in United States, but the current country setting is Belgium. Do you still want to change your country?

Appliances Industry

The outstanding properties of silicones make ELASTOSIL® products ideal for high-end applications such as white goods, household appliances, small appliances and kitchenware. The application determines whether room-temperature curing or heat-curing silicone elastomers are the best choice.

Benefits:

  • Heat resistant (up to 300 °C)
  • Chemical resistance
  • Radiation-resistant (from microwave to UV range)
  • Permanent elasticity (-45 °C to over 200 °C)
  • Ecologically and physiologically safe

Applications:

  • Dish washers
  • Oven doors
  • Washing machines
  • Cooktops
  • Fridges

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break dynamische Viskosität Weiterreißwiderstand Härte Shore A Compression Set Resistance Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® E41 TRANSPARENT - - - - 6.0 N/mm²[8] 6.0 N/mm²[8] 350 %[11] 350 %[11] 100000 mPa·s[2] 100000 mPa·s[2] 11.5 N/mm[1] 11.5 N/mm[1] 40[6] 40[6] - - - - Self-levelling - - -
ELASTOSIL® E43 BLACK - - - - 6.5 N/mm²[9] 6.5 N/mm²[9] 500 %[12] 500 %[12] 250000 mPa·s[3] 250000 mPa·s[3] 11.5 N/mm[1] 11.5 N/mm[1] 30[6] 30[6] - - - Solvent-free - - - -
ELASTOSIL® E43 N BLACK - - - - 7.5 N/mm²[10] 7.5 N/mm²[10] 500 %[13] 500 %[13] - - - - 30[6] 30[6] - - - - Thixotropic - - -
ELASTOSIL® E43 N TRANSPARENT - - - - 7.8 N/mm²[10] 7.8 N/mm²[10] 450 %[13] 450 %[13] - - - - 30[6] 30[6] - - - - Thixotropic - - -
ELASTOSIL® E43 TRANSPARENT - - - - 6.50 N/mm²[8] 6.50 N/mm²[8] 500 %[11] 500 %[11] 250000 mPa·s[4] 250000 mPa·s[4] 11.5 N/mm[1] 11.5 N/mm[1] 30[6] 30[6] - - - Solvent-free - - - -
ELASTOSIL® E47 TRANSPARENT - - 37[7] 37[7] 4.5 N/mm²[9] 4.5 N/mm²[9] 450 %[12] 450 %[12] 600000 mPa·s[5] 600000 mPa·s[5] 10 N/mm[1] 10 N/mm[1] - - - - - MIL-A 46106 grade Non-slump, Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT - - 35[7] 35[7] 2.6 N/mm²[10] 2.6 N/mm²[10] 200 %[13] 200 %[13] - - - - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® LR 3003/30 R A/B transparent transparent 30[7] 30[7] 7.5 N/mm²[10] 7.5 N/mm²[10] 600 %[13] 600 %[13] - - 20 N/mm[1] 20 N/mm[1] - - 10 %[14] 10 %[14] - - - Food-contact, Reduced volatile content - -
ELASTOSIL® RT 702 - - 40[7] 40[7] 6.1 N/mm²[10] 6.1 N/mm²[10] 500 %[13] 500 %[13] - - 10.1[1] 10.1[1] - - - - Heat resistant - Thixotropic - One-component Self-adhesive
ELASTOSIL® RT 771 - - 45[7] 45[7] 1 N/mm²[10] 1 N/mm²[10] 180 %[13] 180 %[13] - - - - - - - - Media resistant - Shear thinning, Thixotropic - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 - - 32[7] 32[7] 2.0 N/mm²[10] 2.0 N/mm²[10] 130 %[13] 130 %[13] - - 3.8 N/mm[1] 3.8 N/mm[1] - - - - Heat resistant, Steam resistant - - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 773 - - 35[7] 35[7] 1.2 N/mm²[10] 1.2 N/mm²[10] 75 %[13] 75 %[13] - - 4.7 N/mm[1] 4.7 N/mm[1] - - - - Media resistant - Shear thinning, Thixotropic, Non-slump - Condensation-curing, Two-component Self-adhesive, Compressible, Low density, Electrically insulating
ELASTOSIL® RT 778 - - 50[7] 50[7] 3.5 N/mm²[10] 3.5 N/mm²[10] 120 %[13] 120 %[13] - - 7.0[1] 7.0[1] - - - - Heat resistant - Shear thinning, Non-slump - Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] dynamische Viskosität D = 1 1/s | 25 °C | DIN EN ISO 3219,  [3] dynamische Viskosität D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [4] D = 1/s | 25 °C | DIN EN ISO 3219,  [5] dynamische Viskosität D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [6] Härte Shore A | DIN ISO 48-4,  [7] Hardness Shore A | DIN ISO 48-4,  [8] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [9] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [10] Tensile strength | ISO 37 type 1,  [11] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [12] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [13] Elongation at break | ISO 37 type 1,  [14] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 6 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited 

Benefits:

  • Heat resistance (up to 300 °C)
  • Self-adhesive properties
  • Chemical resistance
  • Radiation resistance (from microwave to UV range)
  • Permanent elasticity (-45 °C to over 200 °C)
  • Odor-free and tasteless

Applications:

  • Steam irons and ironing stations
  • Microwaves
  • Coffee machines
  • Kettles
  • Rice cookers

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break dynamische Viskosität Viscosity, dynamic Weiterreißwiderstand Resistance Regulation Product Rheology Crosslinking Property Vulcanizate
ELASTOSIL® A07 TRANSLUCENT 20[8] 20[8] 1.5 N/mm²[9] 1.5 N/mm²[9] 300 %[12] 300 %[12] 8000 mPa·s[2] 8000 mPa·s[2] - - 4.0 N/mm[1] 4.0 N/mm[1] - Solvent-based Flowable - -
ELASTOSIL® A234 WHITE 35[8] 35[8] 2.5 N/mm²[9] 2.5 N/mm²[9] 200 %[12] 200 %[12] 25000 mPa·s[3] 25000 mPa·s[3] - - 3.5 N/mm[1] 3.5 N/mm[1] Heat resistant - - - -
ELASTOSIL® E41 TRANSPARENT 40[8] 40[8] 6.0 N/mm²[10] 6.0 N/mm²[10] 350 %[13] 350 %[13] 100000 mPa·s[4] 100000 mPa·s[4] - - 11.5 N/mm[1] 11.5 N/mm[1] - - Self-levelling - -
ELASTOSIL® E43 BLACK 30[8] 30[8] 6.5 N/mm²[11] 6.5 N/mm²[11] 500 %[14] 500 %[14] 250000 mPa·s[3] 250000 mPa·s[3] - - 11.5 N/mm[1] 11.5 N/mm[1] - Solvent-free - - -
ELASTOSIL® E43 N BLACK 30[8] 30[8] 7.5 N/mm²[9] 7.5 N/mm²[9] 500 %[12] 500 %[12] - - - - - - - - Thixotropic - -
ELASTOSIL® E43 N TRANSPARENT 30[8] 30[8] 7.8 N/mm²[9] 7.8 N/mm²[9] 450 %[12] 450 %[12] - - - - - - - - Thixotropic - -
ELASTOSIL® E43 TRANSPARENT 30[8] 30[8] 6.50 N/mm²[10] 6.50 N/mm²[10] 500 %[13] 500 %[13] 250000 mPa·s[5] 250000 mPa·s[5] - - 11.5 N/mm[1] 11.5 N/mm[1] - Solvent-free - - -
ELASTOSIL® E47 TRANSPARENT 37[8] 37[8] 4.5 N/mm²[11] 4.5 N/mm²[11] 450 %[14] 450 %[14] 600000 mPa·s[6] 600000 mPa·s[6] - - 10 N/mm[1] 10 N/mm[1] - MIL-A 46106 grade Non-slump, Thixotropic - -
ELASTOSIL® E50 N TRANSPARENT 35[8] 35[8] 2.6 N/mm²[9] 2.6 N/mm²[9] 200 %[12] 200 %[12] - - - - - - - MIL-A 46106 grade - - -
ELASTOSIL® E50 TRANSPARENT 35[8] 35[8] 1.5 N/mm²[9] 1.5 N/mm²[9] 150 %[12] 150 %[12] - - 50000 mPa·s[7] 50000 mPa·s[7] 5.0 N/mm[1] 5.0 N/mm[1] - MIL-A 46106 grade Self-levelling - -
ELASTOSIL® RT 705 42[8] 42[8] 3.0 N/mm²[9] 3.0 N/mm²[9] 180 %[12] 180 %[12] - - - - 4.6 N/mm[1] 4.6 N/mm[1] Steam resistant, Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 706 32[8] 32[8] 1.9 N/mm²[9] 1.9 N/mm²[9] 180 %[12] 180 %[12] - - - - 3.2 N/mm[1] 3.2 N/mm[1] Steam resistant, Heat resistant - - One-component Self-adhesive
ELASTOSIL® RT 707 W 45[8] 45[8] 3.5 N/mm²[9] 3.5 N/mm²[9] 200 %[12] 200 %[12] - - - - - - Steam resistant, Heat resistant - - One-component Self-adhesive
ELASTOSIL® RT 708 42[8] 42[8] 4.0 N/mm²[9] 4.0 N/mm²[9] 250 %[12] 250 %[12] - - - - 6.3 N/mm[1] 6.3 N/mm[1] Steam resistant, Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 771 45[8] 45[8] 1 N/mm²[9] 1 N/mm²[9] 180 %[12] 180 %[12] - - - - - - Media resistant - Shear thinning, Thixotropic Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 32[8] 32[8] 2.0 N/mm²[9] 2.0 N/mm²[9] 130 %[12] 130 %[12] - - - - 3.8 N/mm[1] 3.8 N/mm[1] Heat resistant, Steam resistant - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 778 50[8] 50[8] 3.5 N/mm²[9] 3.5 N/mm²[9] 120 %[12] 120 %[12] - - - - 7.0[1] 7.0[1] Heat resistant - Shear thinning, Non-slump Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] dynamische Viskosität | 23 °C | DIN EN ISO 2555 | Brookfield: spindle 3, 5 rpm,  [3] dynamische Viskosität D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [4] dynamische Viskosität D = 1 1/s | 25 °C | DIN EN ISO 3219,  [5] D = 1/s | 25 °C | DIN EN ISO 3219,  [6] dynamische Viskosität D = 25 1/s | 25 °C | DIN EN ISO 3219,  [7] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [8] Hardness Shore A | DIN ISO 48-4,  [9] Tensile strength | ISO 37 type 1,  [10] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [11] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [12] Elongation at break | ISO 37 type 1,  [13] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [14] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [] Suited,  [] Well suited,  [] Ideally suited 

Produktempfehlungen

Tabelle ist scrollbar
Produkte
Technische Daten
Produktmerkmale
Härte Shore A Hardness Shore A Reißfestigkeit Reißdehnung Tear strength Viscosity, dynamic Weiterreißwiderstand Druckverformungsrest Beständigkeit Regulatorisch Rheologie Spezifische Merkmale Vernetzungseigenschaft Vulkanisat
ELASTOSIL® A07 TRANSLUCENT - - 20[12] 20[12] 1.5 N/mm²[14] 1.5 N/mm²[14] 300 %[19] 300 %[19] - - 8000 mPa·s[5] 8000 mPa·s[5] 4.0 N/mm[1] 4.0 N/mm[1] - - - lösemittelhaltig Fließfähig - - -
ELASTOSIL® A234 WHITE - - 35[12] 35[12] 2.5 N/mm²[14] 2.5 N/mm²[14] 200 %[19] 200 %[19] - - 25000 mPa·s[6] 25000 mPa·s[6] 3.5 N/mm[1] 3.5 N/mm[1] - - hitzebeständig - - - - -
ELASTOSIL® A33 IVORY - - 28[12] 28[12] 2.5 N/mm²[14] 2.5 N/mm²[14] 300 %[19] 300 %[19] - - 1000000 mPa·s[7] 1000000 mPa·s[7] 7.8 N/mm[2] 7.8 N/mm[2] - - ölbeständig - standfest - - -
ELASTOSIL® A59 GRAY - - 20[12] 20[12] 1.2 N/mm²[14] 1.2 N/mm²[14] 300 %[19] 300 %[19] - - 40000 mPa·s[8] 40000 mPa·s[8] 3.0 N/mm[1] 3.0 N/mm[1] - - ölbeständig, hitzebeständig - Selbstnivellierend - - -
ELASTOSIL® E10 ROT - - 25[12] 25[12] 2.5 N/mm²[15] 2.5 N/mm²[15] 300 %[20] 300 %[20] - - - - 8.0 N/mm[1] 8.0 N/mm[1] - - hitzebeständig lösemittelfrei Fließfähig - - -
ELASTOSIL® E14 Red - - 32[12] 32[12] 2.5 N/mm²[14] 2.5 N/mm²[14] 400 %[19] 400 %[19] - - - - 7 N/mm[1] 7 N/mm[1] - - hitzebeständig MIL-A 46106 Type standfest - - -
ELASTOSIL® E303 TRANSLUZENT - - 30[12] 30[12] 5 N/mm²[16] 5 N/mm²[16] 400 %[21] 400 %[21] - - - - - - - - - lösemittelhaltig - - - -
ELASTOSIL® E4 - - 15[12] 15[12] 2 N/mm²[17] 2 N/mm²[17] 750 %[22] 750 %[22] - - - - 7.3 N/mm[1] 7.3 N/mm[1] - - - - standfest - - -
ELASTOSIL® E41 TRANSPARENT - - 40[12] 40[12] 6.0 N/mm²[17] 6.0 N/mm²[17] 350 %[22] 350 %[22] - - 100000 mPa·s[9] 100000 mPa·s[9] 11.5 N/mm[1] 11.5 N/mm[1] - - - - Selbstnivellierend - - -
ELASTOSIL® E43 BLACK - - 30[12] 30[12] 6.5 N/mm²[18] 6.5 N/mm²[18] 500 %[23] 500 %[23] - - 250000 mPa·s[6] 250000 mPa·s[6] 11.5 N/mm[1] 11.5 N/mm[1] - - - lösemittelfrei - - - -
ELASTOSIL® E43 N BLACK - - 30[12] 30[12] 7.5 N/mm²[14] 7.5 N/mm²[14] 500 %[19] 500 %[19] - - - - - - - - - - thixotropierend - - -
ELASTOSIL® E43 N TRANSPARENT - - 30[12] 30[12] 7.8 N/mm²[14] 7.8 N/mm²[14] 450 %[19] 450 %[19] - - - - - - - - - - thixotropierend - - -
ELASTOSIL® E43 TRANSPARENT - - 30[12] 30[12] 6.50 N/mm²[17] 6.50 N/mm²[17] 500 %[22] 500 %[22] - - 250000 mPa·s[10] 250000 mPa·s[10] 11.5 N/mm[1] 11.5 N/mm[1] - - - lösemittelfrei - - - -
ELASTOSIL® E47 TRANSPARENT - - 37[12] 37[12] 4.5 N/mm²[18] 4.5 N/mm²[18] 450 %[23] 450 %[23] - - 600000 mPa·s[10] 600000 mPa·s[10] 10 N/mm[1] 10 N/mm[1] - - - MIL-A 46106 Type standfest, thixotropierend - - -
ELASTOSIL® E50 N TRANSPARENT - - 35[12] 35[12] 2.6 N/mm²[14] 2.6 N/mm²[14] 200 %[19] 200 %[19] - - - - - - - - - MIL-A 46106 Type - - - -
ELASTOSIL® E50 TRANSPARENT - - 35[12] 35[12] 1.5 N/mm²[14] 1.5 N/mm²[14] 150 %[19] 150 %[19] - - 50000 mPa·s[11] 50000 mPa·s[11] 5.0 N/mm[1] 5.0 N/mm[1] - - - MIL-A 46106 Type Selbstnivellierend - - -
ELASTOSIL® E60 N BLACK - - 30[12] 30[12] 2.1 N/mm²[14] 2.1 N/mm²[14] 200 %[19] 200 %[19] - - - - - - - - - - - - - -
ELASTOSIL® E60 N GREY - - 32[12] 32[12] 3.0 N/mm²[14] 3.0 N/mm²[14] 250 %[19] 250 %[19] - - - - - - - - - - - - - -
ELASTOSIL® E60 N RED - - 32[12] 32[12] 3.2 N/mm²[14] 3.2 N/mm²[14] 250 %[19] 250 %[19] - - - - - - - - - - - - - -
ELASTOSIL® LR 3003/30 R A/B - - 30[12] 30[12] 7.5 N/mm²[14] 7.5 N/mm²[14] 600 %[19] 600 %[19] 20 N/mm[3] 20 N/mm[3] - - - - 10 %[24] 10 %[24] - - - Lebensmittelkontakt, Reduzierter Flüchtigengehalt - -
ELASTOSIL® N 2010 - - 25[12] 25[12] 1 N/mm²[15] 1 N/mm²[15] 200 %[21] 200 %[21] - - - - - - - - - - Scherverdünnend, Selbstnivellierend - - -
ELASTOSIL® N 2034 - - 35[12] 35[12] 2 N/mm²[15] 2 N/mm²[15] 200 %[21] 200 %[21] - - - - - - - - - schwer entflammbar - - - -
ELASTOSIL® N 2076 - - 36[12] 36[12] 1.6 N/mm²[14] 1.6 N/mm²[14] 150 %[19] 150 %[19] - - - - - - - - - schwer entflammbar Fließfähig - - -
ELASTOSIL® N 2189 - - 45[12] 45[12] 1.5 N/mm²[15] 1.5 N/mm²[15] 200 %[21] 200 %[21] 5.0 N/mm[3] 5.0 N/mm[3] - - - - - - ölbeständig, hitzebeständig schwer entflammbar standfest - - -
ELASTOSIL® N 2199 - - 30[12] 30[12] 2.5 N/mm²[15] 2.5 N/mm²[15] 400 %[21] 400 %[21] 6.5 N/mm[3] 6.5 N/mm[3] - - - - - - - - standfest - - -
ELASTOSIL® N9111 BLACK - - 30[12] 30[12] 2.0 N/mm²[15] 2.0 N/mm²[15] 450 %[20] 450 %[20] 8.5 N/mm[4] 8.5 N/mm[4] - - - - - - - schwer entflammbar standfest, thixotropierend - - -
ELASTOSIL® N9111 GREY - - 30[12] 30[12] 2.2 N/mm²[15] 2.2 N/mm²[15] 500 %[20] 500 %[20] 10 N/mm[4] 10 N/mm[4] - - - - - - - - standfest, thixotropierend - - -
ELASTOSIL® N9111 WHITE - - 30[12] 30[12] 2.20 N/mm²[15] 2.20 N/mm²[15] 500 %[20] 500 %[20] 10 N/mm[4] 10 N/mm[4] - - - - - - - schwer entflammbar standfest, thixotropierend - - -
ELASTOSIL® N9189 - - 45[12] 45[12] 2.8 N/mm²[14] 2.8 N/mm²[14] 330 %[19] 330 %[19] - - - - - - - - hitzebeständig - Scherverdünnend, standfest - - -
ELASTOSIL® RT 702 40[13] 40[13] - - 6.1 N/mm²[14] 6.1 N/mm²[14] 500 %[19] 500 %[19] 10.1[3] 10.1[3] - - - - - - hitzebeständig - thixotropierend - einkomponentig selbsthaftend
ELASTOSIL® RT 705 42[13] 42[13] - - 3.0 N/mm²[14] 3.0 N/mm²[14] 180 %[19] 180 %[19] 4.6 N/mm[3] 4.6 N/mm[3] - - - - - - dampfbeständig, hitzebeständig - thixotropierend - einkomponentig selbsthaftend
ELASTOSIL® RT 706 32[13] 32[13] - - 1.9 N/mm²[14] 1.9 N/mm²[14] 180 %[19] 180 %[19] 3.2 N/mm[3] 3.2 N/mm[3] - - - - - - dampfbeständig, hitzebeständig - - - einkomponentig selbsthaftend
ELASTOSIL® RT 707 W 45[13] 45[13] - - 3.5 N/mm²[14] 3.5 N/mm²[14] 200 %[19] 200 %[19] - - - - - - - - dampfbeständig, hitzebeständig - - - einkomponentig selbsthaftend
ELASTOSIL® RT 708 42[13] 42[13] - - 4.0 N/mm²[14] 4.0 N/mm²[14] 250 %[19] 250 %[19] 6.3 N/mm[3] 6.3 N/mm[3] - - - - - - dampfbeständig, hitzebeständig - thixotropierend - einkomponentig selbsthaftend
ELASTOSIL® RT 771 45[13] 45[13] - - 1 N/mm²[14] 1 N/mm²[14] 180 %[19] 180 %[19] - - - - - - - - medienbeständig - Scherverdünnend, thixotropierend - kondensationsvernetzend, zweikomponentig selbsthaftend, elektrisch isolierend
ELASTOSIL® RT 772 32[13] 32[13] - - 2.0 N/mm²[14] 2.0 N/mm²[14] 130 %[19] 130 %[19] 3.8 N/mm[3] 3.8 N/mm[3] - - - - - - hitzebeständig, dampfbeständig - - - kondensationsvernetzend, zweikomponentig selbsthaftend, elektrisch isolierend
ELASTOSIL® RT 773 35[13] 35[13] - - 1.2 N/mm²[14] 1.2 N/mm²[14] 75 %[19] 75 %[19] 4.7 N/mm[3] 4.7 N/mm[3] - - - - - - medienbeständig - Scherverdünnend, thixotropierend, standfest - kondensationsvernetzend, zweikomponentig selbsthaftend, komprimierbar, niedrige Dichte, elektrisch isolierend
ELASTOSIL® RT 778 50[13] 50[13] - - 3.5 N/mm²[14] 3.5 N/mm²[14] 120 %[19] 120 %[19] 7.0[3] 7.0[3] - - - - - - hitzebeständig - Scherverdünnend, standfest - kondensationsvernetzend, zweikomponentig, Schnelle Aushärtung bei Raumtemperatur selbsthaftend, elektrisch isolierend
Legend
[1] Weiterreißwiderstand | ASTM D 624 B,  [2] Weiterreißwiderstand | ASTM D 624 B | 23°C / 2mm,  [3] Tear strength | ASTM D 624 B,  [4] Tear strength | ASTM D 624 B | 23°C / 2mm,  [5] Viscosity, dynamic | 23 °C | DIN EN ISO 2555 | Brookfield: spindle 3, 5 rpm,  [6] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [7] Viscosity, dynamic | 25 °C | 0.5 1/s | DIN EN ISO 3219,  [8] Viscosity, dynamic | 25 °C | DIN EN ISO 3219,  [9] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [10] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [11] Viscosity, dynamic (2.5 rpm) | 23 °C | Brookfield,  [12] Hardness Shore A | DIN ISO 48-4,  [13] Härte Shore A | DIN ISO 48-4,  [14] Reißfestigkeit | ISO 37 Type 1,  [15] Reißfestigkeit | ISO 37 | Type 3 / 23°C / 2mm,  [16] Reißfestigkeit | ISO 37 | Type 3 / 23 °C / d = 2 mm,  [17] Reißfestigkeit | ISO 37 Type 1 | Type 3 / 23°C / 2mm,  [18] Reißfestigkeit | ISO 37 Type 1 | Type 3 /23°C / 2mm,  [19] Reißdehnung | ISO 37 Type 1,  [20] Reißdehnung | ISO 37 | Type 3 / 23°C / 2mm,  [21] Reißdehnung | ISO 37,  [22] Reißdehnung | ISO 37 Type 1 | Type 3 / 23°C / 2mm,  [23] Reißdehnung | ISO 37 Type 1 | Type 3 /23°C / 2mm,  [24] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 6 h / 200 °C,  [] Geeignet,  [] Gut geeignet,  [] Ideal geeignet