Our system has noticed that you are based in United States, but the current country setting is Germany. Do you still want to change your country?

Special FX Molding

Addition-curing ELASTOSIL® FX silicone rubber grades and additives allow to achieve realistic, impressive effects on the skin, in masks and in decorative uses. Film, theater and cosplay are possible areas of application.

Advantages:

  • Safe for use on the skin (no skin irritation)
  • Very soft, excellent elongation accommodates facial expressions and speech when used in life-casting and masks
  • Highly accurate reproduction

Applications:

  • FX makeup / life-casting
  • Wounds and scars
  • Masks
  • Body parts / prosthetic effects
  • Molds for decorative elements / stage and film accessories

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Viscosity, dynamic Tear strength Hardness Shore A Hardness Shore 00 Tensile strength Elongation at break Regulation Product Rheology Crosslinking Property
ELASTOSIL® FX 10 A/B 6000 mPa·s[1] 6000 mPa·s[1] > 20 N/mm[3] > 20 N/mm[3] 10[5] 10[5] - - 4.5 N/mm²[6] 4.5 N/mm²[6] 950 %[7] 950 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX 20 A/B 5000 mPa·s[2] 5000 mPa·s[2] 25 N/mm[3] 25 N/mm[3] 20[5] 20[5] - - > 6 N/mm²[6] > 6 N/mm²[6] > 750 %[7] > 750 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX 28 A/B 10000 mPa·s[2] 10000 mPa·s[2] 28 N/mm[4] 28 N/mm[4] 28[5] 28[5] - - 6 N/mm²[6] 6 N/mm²[6] 500 %[7] 500 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX Gel 30 A/B 4000 mPa·s[2] 4000 mPa·s[2] 5.5 N/mm[3] 5.5 N/mm[3] - - 30[8] 30[8] > 1.5 N/mm²[6] > 1.5 N/mm²[6] > 900 %[7] > 900 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
Legend
[1] Viscosity, dynamic | 23 °C | ISO 3219,  [2] Viscosity, dynamic after stirring | 23 °C | ISO 3219,  [3] Tear strength | ASTM D 624, Die B,  [4] Tear strength | ASTM D 624 B,  [5] Hardness Shore A | DIN ISO 48-4,  [6] Tensile strength | ISO 37 type 1,  [7] Elongation at break | ISO 37 type 1,  [8] Hardness Shore 00 | ASTM D 2240