Our system has noticed that you are based in United States, but the current country setting is United Kingdom. Do you still want to change your country?

Heating and Cooling

The requirements for heating and cooling systems are wide-ranging. Thanks to their outstanding properties, ELASTOSIL® and WACKER SilGel ® products are suitable for a broad variety of applications. And since they are ecologically and physiologically safe, they can also be used in food-contact applications on a case-by-case basis.

Heating & Cooling

Properties:

  • Heat resistance
  • Self-adhesive properties
  • Chemical resistance
  • Radiation-resistant (from microwave to UV range)
  • Permanent elasticity (-45 °C to over 200 °C)

Typical Application:

  • Air conditioning units
  • Cleanroom filters
  • Heat exchangers
  • Heating systems

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Viscosity, dynamic Resistance Product Type Regulation Product Rheology Specific Features Crosslinking Property Vulcanizate
ELASTOSIL® A234 WHITE - - 35[9] 35[9] 2.5 N/mm²[10] 2.5 N/mm²[10] 200 %[15] 200 %[15] 3.5 N/mm[1] 3.5 N/mm[1] 25000 mPa·s[3] 25000 mPa·s[3] Heat resistant - - - - - -
ELASTOSIL® A33 IVORY - - 28[9] 28[9] 2.5 N/mm²[10] 2.5 N/mm²[10] 300 %[15] 300 %[15] 7.8 N/mm[2] 7.8 N/mm[2] 1000000 mPa·s[4] 1000000 mPa·s[4] Oil resistant - - Non-slump - - -
ELASTOSIL® A59 GRAY - - 20[9] 20[9] 1.2 N/mm²[10] 1.2 N/mm²[10] 300 %[15] 300 %[15] 3.0 N/mm[1] 3.0 N/mm[1] 40000 mPa·s[5] 40000 mPa·s[5] Oil resistant, Heat resistant - - Self-levelling - - -
ELASTOSIL® E10 ROT - - 25[9] 25[9] 2.5 N/mm²[11] 2.5 N/mm²[11] 300 %[16] 300 %[16] 8.0 N/mm[1] 8.0 N/mm[1] - - Heat resistant - Solvent-free Flowable - - -
ELASTOSIL® E14 Red - - 32[9] 32[9] 2.5 N/mm²[10] 2.5 N/mm²[10] 400 %[15] 400 %[15] 7 N/mm[1] 7 N/mm[1] - - Heat resistant - MIL-A 46106 grade Non-slump - - -
ELASTOSIL® E303 TRANSLUZENT - - 30[9] 30[9] 5 N/mm²[12] 5 N/mm²[12] 400 %[17] 400 %[17] - - - - - - Solvent-based - - - -
ELASTOSIL® E4 - - 15[9] 15[9] 2 N/mm²[13] 2 N/mm²[13] 750 %[18] 750 %[18] 7.3 N/mm[1] 7.3 N/mm[1] - - - - - Non-slump - - -
ELASTOSIL® E41 TRANSPARENT - - 40[9] 40[9] 6.0 N/mm²[13] 6.0 N/mm²[13] 350 %[18] 350 %[18] 11.5 N/mm[1] 11.5 N/mm[1] 100000 mPa·s[6] 100000 mPa·s[6] - - - Self-levelling - - -
ELASTOSIL® E43 BLACK - - 30[9] 30[9] 6.5 N/mm²[14] 6.5 N/mm²[14] 500 %[19] 500 %[19] 11.5 N/mm[1] 11.5 N/mm[1] 250000 mPa·s[3] 250000 mPa·s[3] - - Solvent-free - - - -
ELASTOSIL® E43 N BLACK - - 30[9] 30[9] 7.5 N/mm²[10] 7.5 N/mm²[10] 500 %[15] 500 %[15] - - - - - - - Thixotropic - - -
ELASTOSIL® E43 N TRANSPARENT - - 30[9] 30[9] 7.8 N/mm²[10] 7.8 N/mm²[10] 450 %[15] 450 %[15] - - - - - - - Thixotropic - - -
ELASTOSIL® E43 TRANSPARENT - - 30[9] 30[9] 6.50 N/mm²[13] 6.50 N/mm²[13] 500 %[18] 500 %[18] 11.5 N/mm[1] 11.5 N/mm[1] 250000 mPa·s[7] 250000 mPa·s[7] - - Solvent-free - - - -
ELASTOSIL® E47 TRANSPARENT - - 37[9] 37[9] 4.5 N/mm²[14] 4.5 N/mm²[14] 450 %[19] 450 %[19] 10 N/mm[1] 10 N/mm[1] 600000 mPa·s[7] 600000 mPa·s[7] - - MIL-A 46106 grade Non-slump, Thixotropic - - -
ELASTOSIL® E50 N TRANSPARENT - - 35[9] 35[9] 2.6 N/mm²[10] 2.6 N/mm²[10] 200 %[15] 200 %[15] - - - - - - MIL-A 46106 grade - - - -
ELASTOSIL® E60 N BLACK - - 30[9] 30[9] 2.1 N/mm²[10] 2.1 N/mm²[10] 200 %[15] 200 %[15] - - - - - - - - - - -
ELASTOSIL® E60 N GREY - - 32[9] 32[9] 3.0 N/mm²[10] 3.0 N/mm²[10] 250 %[15] 250 %[15] - - - - - - - - - - -
ELASTOSIL® E60 N RED - - 32[9] 32[9] 3.2 N/mm²[10] 3.2 N/mm²[10] 250 %[15] 250 %[15] - - - - - - - - - - -
ELASTOSIL® N 2010 - - 25[9] 25[9] 1 N/mm²[11] 1 N/mm²[11] 200 %[17] 200 %[17] - - 10.000 mPa·s[8] 10.000 mPa·s[8] - - - Shear thinning, Self-levelling - - -
ELASTOSIL® N 2034 - - 35[9] 35[9] 2 N/mm²[11] 2 N/mm²[11] 200 %[17] 200 %[17] - - 30000 mPa·s[7] 30000 mPa·s[7] - - Flame retardant - - - -
ELASTOSIL® N 2076 - - 36[9] 36[9] 1.6 N/mm²[10] 1.6 N/mm²[10] 150 %[15] 150 %[15] - - - - - - Flame retardant Flowable - - -
ELASTOSIL® N 2189 - - 45[9] 45[9] 1.5 N/mm²[11] 1.5 N/mm²[11] 200 %[17] 200 %[17] 5.0 N/mm[1] 5.0 N/mm[1] 250000 mPa·s[7] 250000 mPa·s[7] Oil resistant, Heat resistant - Flame retardant Non-slump - - -
ELASTOSIL® N9111 BLACK - - 30[9] 30[9] 2.0 N/mm²[11] 2.0 N/mm²[11] 450 %[16] 450 %[16] 8.5 N/mm[2] 8.5 N/mm[2] 1000000 mPa·s[7] 1000000 mPa·s[7] - - Flame retardant Non-slump, Thixotropic - - -
ELASTOSIL® N9111 GREY - - 30[9] 30[9] 2.2 N/mm²[11] 2.2 N/mm²[11] 500 %[16] 500 %[16] 10 N/mm[2] 10 N/mm[2] 1000000 mPa·s[7] 1000000 mPa·s[7] - - - Non-slump, Thixotropic - - -
ELASTOSIL® N9111 WHITE - - 30[9] 30[9] 2.20 N/mm²[11] 2.20 N/mm²[11] 500 %[16] 500 %[16] 10 N/mm[2] 10 N/mm[2] 900000 mPa·s[3] 900000 mPa·s[3] - - Flame retardant Non-slump, Thixotropic - - -
ELASTOSIL® N9189 - - 40[9] 40[9] 2.8 N/mm²[10] 2.8 N/mm²[10] 300 %[15] 300 %[15] - - - - Heat resistant - - Shear thinning, Non-slump - - -
ELASTOSIL® RT 702 - - 40[9] 40[9] 6.1 N/mm²[10] 6.1 N/mm²[10] 500 %[15] 500 %[15] 10.1[1] 10.1[1] - - Heat resistant - - Thixotropic - One-component Self-adhesive
WACKER® AKC Silicone Fluids clear to slightly turbid clear to slightly turbid - - - - - - - - - - - Silicone Fluid, Fluid - - Heat resistant - -
Legend
[1] Tear strength | ASTM D 624 B,  [2] Tear strength | ASTM D 624 B | 23°C / 2mm,  [3] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [4] Viscosity, dynamic | 25 °C | 0.5 1/s | DIN EN ISO 3219,  [5] Viscosity, dynamic | 25 °C | DIN EN ISO 3219,  [6] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [7] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [8] Viscosity, dynamic | 25 1/s | ISO 3219,  [9] Hardness Shore A | DIN ISO 48-4,  [10] Tensile strength | ISO 37 type 1,  [11] Tensile strength | ISO 37 | Type 3 / 23°C / 2mm,  [12] Tensile strength | ISO 37 | Type 3 / 23 °C / d = 2 mm,  [13] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [14] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [15] Elongation at break | ISO 37 type 1,  [16] Elongation at break | ISO 37 | Type 3 / 23°C / 2mm,  [17] Elongation at break | ISO 37,  [18] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [19] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [] Suited,  [] Well suited,  [] Ideally suited