Our system has noticed that you are based in United States, but the current country setting is United Kingdom. Do you still want to change your country?
- Home
- Products & Services
- Applications
- Construction Materials
- Tile Adhesives & Tile Grouts
Tile Adhesives & Tile Grouts
Polymer-modified tile adhesives allow large-format tiles to be laid from top to bottom using the thin-bed technique.
VINNAPAS® polymer binders enhance the performance of tile adhesives, making it possible to use the thin-bed technique. They also allow the tile adhesive to be customized to a variety of tiles and substrates. The properties of tile grouts are also optimized by adding VINNAPAS® polymer binders.
To protect buildings from water, modern high-performance dry-mix mortars are formulated with water-repellent additives. SILRES® silane/silicone-based POWDER additives are an excellent alternative as they offer protection for surfaces as well as for the entire matrix.
1-component (1K) cementitious system
VINNAPAS® dispersible polymer powders enhance the performance of 1-component (1K) cementitious tile adhesives and optimize their cost-performance ratio. They are used in the formulation of premixed dry-mix mortars that need only be mixed with water at the jobsite.
Benefits:
- Excellent adhesion to different substrates in a wide range of conditions
- Longer open and correction times even at higher ambient temperatures
- Improved cohesive strength
- Improved flexibility to prevent cracking resulting from stress between the substrate and the tile
Deformability of Cementitious Tile Adhesives at 23 °C
Class S1 ≥ 2.5 mm; Class S2 ≥ 5.0 mm
VINNAPAS® improves flexibility and thus adds to longevity.
Applications:
- Natural and artificial stones
- Floor and wall tiles
- Small and large format tiles
- Porous and nonporous tiles
- Mineral and non-mineral substrates
Improved Adhesion and Flexibility
Tile adhesives modified with VINNAPAS® polymer powders show strong adhesion properties, e.g. when applied between fully vitrified tiles and difficult substrates.
产品推荐
抱歉，没有找到符合您的筛选条件的结果
|
个产品
|
技术数据
|
One-Component Cementitious Tile Adhesives
|
|||
|---|---|---|---|---|---|
| 最低成膜温度 |
粘合强度/浸水养护
|
热老化后拉伸粘结强度
|
开放时间
|
||
| VINNAPAS® 4023 N (KOR) | 1 °C[1] 33.8 °F[1] | - | - | - | |
| VINNAPAS® 4023 N (GER) | 1 °C[1] 33.8 °F[1] | 良好 | Very good | Very good | |
| VINNAPAS® 4115 N (GER) | 4 °C[1] 39.2 °F[1] | 良好 | 极好 | Very good | |
| VINNAPAS® 4121 N | 1 °C[1] 33.8 °F[1] | 良好 | 极好 | Very good | |
| VINNAPAS® 4419 E (Scale-up Product) | 4 °C[1] 39.2 °F[1] | 良好 | 极好 | 极好 | |
| VINNAPAS® 5005 N | 11 °C[1] 51.8 °F[1] | - | 极好 | Very good | |
| VINNAPAS® 5010 N (GER) | 4 °C[1] 39.2 °F[1] | 良好 | 极好 | Very good | |
| VINNAPAS® 5010 N (KOR) | 4 °C[1] 39.2 °F[1] | - | - | - | |
| VINNAPAS® 5028 E (GER) | 4 °C[1] 39.2 °F[1] | Very good | Very good | 极好 | |
| VINNAPAS® 5710 N (GER) (Scale-up Product) | 4 °C[1] 39.2 °F[1] | 良好 | 极好 | Very good | |
| VINNAPAS® 7220 E | 5 °C[1] 41.0 °F[1] | 极好 | 极好 | Very good | |
| VINNAPAS® 7410 E | 4 °C[1] 39.2 °F[1] | Very good | 极好 | Very good | |
| VINNAPAS® 8118 E | 4 °C[1] 39.2 °F[1] | Very good | 极好 | 极好 | |
| VINNAPAS® 8620 E | 5 °C[1] 41.0 °F[1] | 极好 | Very good | 极好 | |
| VINNAPAS® 8819 E (Scale-up Product) | 4 °C[1] 39.2 °F[1] | Very good | 极好 | 极好 | |
[1] 最低成膜温度 | DIN ISO 2115, [] 适合, [] 非常适合, [] 极其适合
1-component (1K) ready-to-use system
1K ready-to-use ceramic tile adhesives do not have to be mixed on site and can be used straight from the bucket. VINNAPAS® polymer dispersions improve the performance of 1K ready-to-use systems such as adhesion, cohesion and flexibility. This makes it possible to bond a wide range of tiles on almost any surface, e.g. other tiles, wood or gypsum board.
Benefits:
- Easy application
- Longer open times even at high ambient temperatures
- Improved flexibility to prevent cracking resulting from stress between the substrate and the tile
- Excellent adhesion to different substrates
- Improved cohesive strength
To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.
To show you additional content, we need your permission to set cookies. Please accept “Functional Cookies” in your cookie settings.
Excellent Shear Bond Strength – Shear Bond strength tested after storage under various conditions is the most decisive performance criterion for class D2 ready-to-use ceramic tile adhesives. Unlike standard styrene-acrylic dispersions, VINNAPAS® silanized styrene-acrylic dispersions can be used for formulating class D2 ready-to-use ceramic tile adhesives.
Applications
- Interior wall tiling in wet rooms and kitchens with natural and artificial stones
- Small and large format tiles
- Porous and nonporous tiles
- Mineral and non-mineral substrates
产品推荐
抱歉，没有找到符合您的筛选条件的结果
|
个产品
|
技术数据
|
Ready-to-Use Tile Adhesives
|
||||
|---|---|---|---|---|---|---|
| Viscosity, dynamic | 玻璃化温度 |
浸水后拉伸粘结强度
|
高温老化后剪切粘结强度
|
开放时间
|
||
| VINNAPAS® 202 HD | 1500 - 3500 mPa·s 1500 - 3500 mPa·s | 18 °C[1] 64.4 °F[1] | 极好 | 极好 | Very good | |
| VINNAPAS® 224 HD | 6000 - 12000 mPa·s 6000 - 12000 mPa·s | approx. 20.0 °C[1] approx. 68 °F[1] | 极好 | 极好 | Very good | |
| VINNAPAS® 240 HD | 700 - 3000 mPa·s 700 - 3000 mPa·s | approx. 0 °C[1] approx. 32.0 °F[1] | Very good | Very good | Very good | |
[1] 玻璃化温度 | 专用方法, [] 适合, [] 非常适合, [] 极其适合
VINNAPAS® polymer powders improve the durability and visual appearance of grouts.
Benefits:
- Higher flexibility and better mechanical properties
- Protection against water penetration thanks to greatly improved adhesion to tile edges and reduced shrinkage
- Increased deformability and improved abrasion resistance
- Higher hydrophobicity and water repellency when using VINNAPAS® H Class polymer powders
- High durability
Abrasion Resistance of Polymer-Modified Tile Grouts
Application Spectrum:
- Natural and artificial stones
- Floor and wall tiles
- Small and large tiles
- Porous and nonporous tiles
- Interior and exterior
产品推荐
抱歉，没有找到符合您的筛选条件的结果
|
个产品
|
技术数据
|
Tile Grouts
|
||
|---|---|---|---|---|
| 最低成膜温度 |
憎水性
|
施工性
|
||
| VINNAPAS® 3030 H | 0 °C[1] 32.0 °F[1] | 极好 | 中等 | |
| VINNAPAS® 5048 H | 0 °C[1] 32.0 °F[1] | Very good | Very good | |
| VINNAPAS® 5518 H | 4 °C[1] 39.2 °F[1] | Very good | Very good | |
| VINNAPAS® 7031 H | 0 °C[1] 32.0 °F[1] | Very good | 极好 | |
| VINNAPAS® 8031 H | 0 °C[1] 32.0 °F[1] | Very good | Very good | |
| VINNAPAS® 8034 H | 0 °C[1] 32.0 °F[1] | 极好 | 良好 | |
[1] 最低成膜温度 | DIN ISO 2115, [] 适合, [] 非常适合, [] 极其适合
WACKER’s SILRES® POWDER Additive portfolio includes products based on silanes and silicones that are manufactured with two different technologies. The active ingredient in SILRES® POWDER A is located on the surface of an inorganic carrier, while in SILRES® POWDER D, it is encapsulated.
SILRES® POWDER additives can simply be added to dry formulations to impart hardness, adhesion and strength to the end product. They are compatible with a broad range of dry additives and remain stable in alkaline formulations.
Benefits:
- Water repellency and protection against defects caused by the ingress of water
- Integral treatment, long-lasting protection against water
- Stain resistance
- Durability – increases product lifecycle
- No negative impact on hardness, adhesion and strength of the end product
- Environmentally friendly: manufactured without the use of organic solvents.
Product Recommendations
Sorry, no results are available for your filter criteria and selected country. Please contact one of our sales offices.
