Our system has noticed that you are based in United States, but the current country setting is United Kingdom. Do you still want to change your country?

Special FX Molding

Addition-curing ELASTOSIL® FX silicone rubber grades and additives allow to achieve realistic, impressive effects on the skin, in masks and in decorative uses. Film, theater and cosplay are possible areas of application.

Advantages:

  • Safe for use on the skin (no skin irritation)
  • Very soft, excellent elongation accommodates facial expressions and speech when used in life-casting and masks
  • Highly accurate reproduction

Applications:

  • FX makeup / life-casting
  • Wounds and scars
  • Masks
  • Body parts / prosthetic effects
  • Molds for decorative elements / stage and film accessories

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Viscosity, dynamic Tear strength Hardness Shore A Hardness Shore 00 Tensile strength Elongation at break Regulation Product Rheology Crosslinking Property
ELASTOSIL® FX 10 A/B 6000 mPa·s[1] 6000 mPa·s[1] > 20 N/mm[3] > 20 N/mm[3] 10[5] 10[5] - - 4.5 N/mm²[6] 4.5 N/mm²[6] 950 %[7] 950 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX 20 A/B 5000 mPa·s[2] 5000 mPa·s[2] 25 N/mm[3] 25 N/mm[3] 20[5] 20[5] - - > 6 N/mm²[6] > 6 N/mm²[6] > 750 %[7] > 750 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX 28 A/B 10000 mPa·s[2] 10000 mPa·s[2] 28 N/mm[4] 28 N/mm[4] 28[5] 28[5] - - 6 N/mm²[6] 6 N/mm²[6] 500 %[7] 500 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
ELASTOSIL® FX Gel 30 A/B 4000 mPa·s[2] 4000 mPa·s[2] 5.5 N/mm[3] 5.5 N/mm[3] - - 30[8] 30[8] > 1.5 N/mm²[6] > 1.5 N/mm²[6] > 900 %[7] > 900 %[7] Suitable for skin contact Flowable No chemical shrinkage, Two-component, Addition Curing, Fast curing at room temperature
Legend
[1] Viscosity, dynamic | 23 °C | ISO 3219,  [2] Viscosity, dynamic after stirring | 23 °C | ISO 3219,  [3] Tear strength | ASTM D 624, Die B,  [4] Tear strength | ASTM D 624 B,  [5] Hardness Shore A | DIN ISO 48-4,  [6] Tensile strength | ISO 37 type 1,  [7] Elongation at break | ISO 37 type 1,  [8] Hardness Shore 00 | ASTM D 2240