我们的系统检测到您来自 美国，但当前设定的国家/地区为马来西亚。 您仍然要更改您的国家/地区吗？

机械制造

机械制造行业使用的胶粘剂必须满足许多应用要求。例如，有些应用对产品的耐热性和耐化学品性有相当高的要求，而另一些应用则可能需要产品具有某种特殊的电气性能或固化时间更短。瓦克ELASTOSIL®、SilGel®和SILRES®品牌的定制产品，因整体性能出色，同样能够满足机械制造业极其严格的应用要求。 此外，它们没有生态及生理危害，如有需要，亦可用于可能与食品发生接触的领域。

Machine Building

性能：

  • 热稳定（高达300°C）
  • 无需预处理便可粘合
  • 耐化学品
  • 电气性能稳定
  • 导热（高达2.5 W x K–1 x m–1）
  • 耐辐射（微波至紫外线范围）
  • 弹性持久（–45°C至200°C以上）

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Hardness Shore A Tensile strength Elongation at break Viscosity, dynamic Tear strength Resistance Regulation Product Rheology Crosslinking Property Vulcanizate
ELASTOSIL® A234 WHITE 35[9] 35[9] 2.5 N/mm²[11] 2.5 N/mm²[11] 200 %[16] 200 %[16] 25000 mPa·s[3] 25000 mPa·s[3] 3.5 N/mm[1] 3.5 N/mm[1] Heat resistant - - - -
ELASTOSIL® A316 15[9] 15[9] 0.8 N/mm²[11] 0.8 N/mm²[11] 200 %[16] 200 %[16] - - - - - - - - -
ELASTOSIL® A33 IVORY 28[9] 28[9] 2.5 N/mm²[11] 2.5 N/mm²[11] 300 %[16] 300 %[16] 1000000 mPa·s[4] 1000000 mPa·s[4] 7.8 N/mm[2] 7.8 N/mm[2] Oil resistant - Non-slump - -
ELASTOSIL® A59 GRAY 20[9] 20[9] 1.2 N/mm²[11] 1.2 N/mm²[11] 300 %[16] 300 %[16] 40000 mPa·s[5] 40000 mPa·s[5] 3.0 N/mm[1] 3.0 N/mm[1] Oil resistant, Heat resistant - Self-levelling - -
ELASTOSIL® E10 ROT 25[9] 25[9] 2.5 N/mm²[12] 2.5 N/mm²[12] 300 %[17] 300 %[17] - - 8.0 N/mm[1] 8.0 N/mm[1] Heat resistant Solvent-free Flowable - -
ELASTOSIL® E14 Red 32[9] 32[9] 2.5 N/mm²[11] 2.5 N/mm²[11] 400 %[16] 400 %[16] - - 7 N/mm[1] 7 N/mm[1] Heat resistant MIL-A 46106 grade Non-slump - -
ELASTOSIL® E303 TRANSLUZENT 30[9] 30[9] 5 N/mm²[13] 5 N/mm²[13] 400 %[18] 400 %[18] - - - - - Solvent-based - - -
ELASTOSIL® E4 15[9] 15[9] 2 N/mm²[14] 2 N/mm²[14] 750 %[19] 750 %[19] - - 7.3 N/mm[1] 7.3 N/mm[1] - - Non-slump - -
ELASTOSIL® E41 TRANSPARENT 40[9] 40[9] 6.0 N/mm²[14] 6.0 N/mm²[14] 350 %[19] 350 %[19] 100000 mPa·s[6] 100000 mPa·s[6] 11.5 N/mm[1] 11.5 N/mm[1] - - Self-levelling - -
ELASTOSIL® E43 BLACK 30[9] 30[9] 6.5 N/mm²[15] 6.5 N/mm²[15] 500 %[20] 500 %[20] 250000 mPa·s[3] 250000 mPa·s[3] 11.5 N/mm[1] 11.5 N/mm[1] - Solvent-free - - -
ELASTOSIL® E43 N BLACK 30[9] 30[9] 7.5 N/mm²[11] 7.5 N/mm²[11] 500 %[16] 500 %[16] - - - - - - Thixotropic - -
ELASTOSIL® E43 N TRANSPARENT 30[9] 30[9] 7.8 N/mm²[11] 7.8 N/mm²[11] 450 %[16] 450 %[16] - - - - - - Thixotropic - -
ELASTOSIL® E43 TRANSPARENT 30[9] 30[9] 6.50 N/mm²[14] 6.50 N/mm²[14] 500 %[19] 500 %[19] 250000 mPa·s[7] 250000 mPa·s[7] 11.5 N/mm[1] 11.5 N/mm[1] - Solvent-free - - -
ELASTOSIL® E47 TRANSPARENT 37[9] 37[9] 4.5 N/mm²[15] 4.5 N/mm²[15] 450 %[20] 450 %[20] 600000 mPa·s[7] 600000 mPa·s[7] 10 N/mm[1] 10 N/mm[1] - MIL-A 46106 grade Non-slump, Thixotropic - -
ELASTOSIL® E50 N TRANSPARENT 35[9] 35[9] 2.6 N/mm²[11] 2.6 N/mm²[11] 200 %[16] 200 %[16] - - - - - MIL-A 46106 grade - - -
ELASTOSIL® E60 N BLACK 30[9] 30[9] 2.1 N/mm²[11] 2.1 N/mm²[11] 200 %[16] 200 %[16] - - - - - - - - -
ELASTOSIL® E60 N GREY 32[9] 32[9] 3.0 N/mm²[11] 3.0 N/mm²[11] 250 %[16] 250 %[16] - - - - - - - - -
ELASTOSIL® E60 N RED 32[9] 32[9] 3.2 N/mm²[11] 3.2 N/mm²[11] 250 %[16] 250 %[16] - - - - - - - - -
ELASTOSIL® N 2010 25[9] 25[9] 1 N/mm²[12] 1 N/mm²[12] 200 %[18] 200 %[18] 10.000 mPa·s[8] 10.000 mPa·s[8] - - - - Shear thinning, Self-levelling - -
ELASTOSIL® N 2034 35[9] 35[9] 2 N/mm²[12] 2 N/mm²[12] 200 %[18] 200 %[18] 30000 mPa·s[7] 30000 mPa·s[7] - - - Flame retardant - - -
ELASTOSIL® N 2076 36[9] 36[9] 1.6 N/mm²[11] 1.6 N/mm²[11] 150 %[16] 150 %[16] - - - - - Flame retardant Flowable - -
ELASTOSIL® N 2189 45[9] 45[9] 1.5 N/mm²[12] 1.5 N/mm²[12] 200 %[18] 200 %[18] 250000 mPa·s[7] 250000 mPa·s[7] 5.0 N/mm[1] 5.0 N/mm[1] Oil resistant, Heat resistant Flame retardant Non-slump - -
ELASTOSIL® N 2199 30[9] 30[9] 2.5 N/mm²[12] 2.5 N/mm²[12] 400 %[18] 400 %[18] 950000 mPa·s[3] 950000 mPa·s[3] 6.5 N/mm[1] 6.5 N/mm[1] - - Non-slump - -
ELASTOSIL® N9111 BLACK 30[9] 30[9] 2.0 N/mm²[12] 2.0 N/mm²[12] 450 %[17] 450 %[17] 1000000 mPa·s[7] 1000000 mPa·s[7] 8.5 N/mm[2] 8.5 N/mm[2] - Flame retardant Non-slump, Thixotropic - -
ELASTOSIL® N9111 GREY 30[9] 30[9] 2.2 N/mm²[12] 2.2 N/mm²[12] 500 %[17] 500 %[17] 1000000 mPa·s[7] 1000000 mPa·s[7] 10 N/mm[2] 10 N/mm[2] - - Non-slump, Thixotropic - -
ELASTOSIL® N9111 WHITE 30[9] 30[9] 2.20 N/mm²[12] 2.20 N/mm²[12] 500 %[17] 500 %[17] 900000 mPa·s[3] 900000 mPa·s[3] 10 N/mm[2] 10 N/mm[2] - Flame retardant Non-slump, Thixotropic - -
ELASTOSIL® N9189 45[9] 45[9] 2.8 N/mm²[11] 2.8 N/mm²[11] 330 %[16] 330 %[16] - - - - Heat resistant - Shear thinning, Non-slump - -
ELASTOSIL® RT 702 40[9] 40[9] 6.1 N/mm²[11] 6.1 N/mm²[11] 500 %[16] 500 %[16] - - 10.1[1] 10.1[1] Heat resistant - Thixotropic One-component Self-adhesive
ELASTOSIL® RT 723 A/B - - 5.9 N/mm²[11] 5.9 N/mm²[11] 500 %[16] 500 %[16] 600000 mPa·s[4] 600000 mPa·s[4] 13.8 N/mm[1] 13.8 N/mm[1] Media resistant, Heat resistant, UV stable - - Fast curing under heat, Two-component, Addition Curing -
ELASTOSIL® RT 771 45[9] 45[9] 1 N/mm²[11] 1 N/mm²[11] 180 %[16] 180 %[16] - - - - Media resistant - Shear thinning, Thixotropic Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 772 32[9] 32[9] 2.0 N/mm²[11] 2.0 N/mm²[11] 130 %[16] 130 %[16] - - 3.8 N/mm[1] 3.8 N/mm[1] Heat resistant, Steam resistant - - Condensation-curing, Two-component Self-adhesive, Electrically insulating
ELASTOSIL® RT 778 50[9] 50[9] 3.5 N/mm²[11] 3.5 N/mm²[11] 120 %[16] 120 %[16] - - 7.0[1] 7.0[1] Heat resistant - Shear thinning, Non-slump Condensation-curing, Two-component, Fast curing at room temperature Self-adhesive, Electrically insulating
ELASTOSIL® RT 779 50[10] 50[10] 2.8 N/mm²[11] 2.8 N/mm²[11] 250 %[16] 250 %[16] - - 9.5 N/mm[1] 9.5 N/mm[1] Oil resistant - Shear thinning, Thixotropic, Non-slump Condensation-curing, Two-component Self-adhesive, Electrically insulating
Legend
[1] Tear strength | ASTM D 624 B,  [2] Tear strength | ASTM D 624 B | 23°C / 2mm,  [3] Viscosity, dynamic D = 0,5 1/s | 25 °C | DIN EN ISO 3219,  [4] Viscosity, dynamic | 25 °C | 0.5 1/s | DIN EN ISO 3219,  [5] Viscosity, dynamic | 25 °C | DIN EN ISO 3219,  [6] Viscosity, dynamic D = 1 1/s | 25 °C | DIN EN ISO 3219,  [7] Viscosity, dynamic D = 0.5 1/s | 25 °C | DIN EN ISO 3219,  [8] Viscosity, dynamic | 25 1/s | ISO 3219,  [9] Hardness Shore A | DIN ISO 48-4,  [10] Hardness Shore A | ISO 1183-1 A,  [11] Tensile strength | ISO 37 type 1,  [12] Tensile strength | ISO 37 | Type 3 / 23°C / 2mm,  [13] Tensile strength | ISO 37 | Type 3 / 23 °C / d = 2 mm,  [14] Tensile strength | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [15] Tensile strength | ISO 37 type 1 | Type 3 /23°C / 2mm,  [16] Elongation at break | ISO 37 type 1,  [17] Elongation at break | ISO 37 | Type 3 / 23°C / 2mm,  [18] Elongation at break | ISO 37,  [19] Elongation at break | ISO 37 type 1 | Type 3 / 23°C / 2mm,  [20] Elongation at break | ISO 37 type 1 | Type 3 /23°C / 2mm,  [] Suited,  [] Well suited,  [] Ideally suited