我们的系统检测到您来自 美国，但当前设定的国家/地区为尼日利亚。 您仍然要更改您的国家/地区吗？

减震

瓦克的硅油和液体及固体硅橡胶产品，同时具备理想的阻尼性能、出色的耐久性和可靠性，是现代汽车与发动机制造应用不可或缺的组成部分，产品优异的功能在大跨度温差条件下，表现尤为显著。

优势：

  • 在大跨度的温度范围内保持稳定的阻尼性能
  • 阻尼性能可按需调整，用途多元
  • 固化迅速
  • 抗撕裂强度高
  • 压缩形变率低
  • 热稳定性能优异
  • 动态承载能力强

应用：

以下领域的减震器

  • 安全气囊
  • 电气元件
  • 排气管
  • 发动机
  • 车身

优势：

  • 剪切稳定性和热稳定性优异
  • 在大跨度的温度和频率范围内保持稳定的流变性能
  • 在减震器的整个使用寿命期间保持功能可靠

应用：

  • 粘性扭转减振器填料（粘滞阻尼器）

Product Recommendations

Products
Technical data
Product properties
Appearance Product Type Specific Features
WACKER® AK 1 000 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid High viscosity, Heat resistant
WACKER® AK 100 000 STAB colorless, slightly cloudy colorless, slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 150 000 STAB colorless,slightly cloudy colorless,slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 200 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 300 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid Heat resistant
WACKER® AK 500 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid High viscosity, Heat resistant
WACKER® AK 600 000 STAB colourless, slightly cloudy colourless, slightly cloudy Silicone Fluid High viscosity, Heat resistant
Legend
[] Suited,  [] Well suited,  [] Ideally suited 

优势：

  • 无论温度高低或所在气候带，均可保持稳定的减震性能
  • 热稳定性能优异
  • 动态承载能力强
  • 抗撕裂强度高

Product Recommendations

Table is scrollable
Products
Technical data
Product properties
Appearance Hardness Shore A Tensile strength Elongation at break Tear strength Compression Set Specific Features
ELASTOSIL® eco R 401/40 S transparent transparent 41[1] 41[1] 11.0 N/mm²[2] 11.0 N/mm²[2] 730 %[3] 730 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose
ELASTOSIL® eco R 401/80 S transparent transparent 81[1] 81[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 430 %[3] 430 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[5] 41 %[5] Food-contact, General purpose
ELASTOSIL® R 401/10 OH transparent transparent 13[1] 13[1] 6.6 N/mm²[2] 6.6 N/mm²[2] 1200 %[3] 1200 %[3] 20 N/mm[4] 20 N/mm[4] 41 %[5] 41 %[5] Food-contact, General purpose
ELASTOSIL® R 401/20 OH transparent transparent 23[1] 23[1] 9.0 N/mm²[2] 9.0 N/mm²[2] 1000 %[3] 1000 %[3] 27 N/mm[4] 27 N/mm[4] 33 %[5] 33 %[5] Food-contact, General purpose
ELASTOSIL® R 401/30 OH transparent transparent 35[1] 35[1] 9.5 N/mm²[2] 9.5 N/mm²[2] 640 %[3] 640 %[3] 19 N/mm[4] 19 N/mm[4] 12 %[5] 12 %[5] Food-contact
ELASTOSIL® R 401/30 S transparent transparent 28[1] 28[1] 10 N/mm²[2] 10 N/mm²[2] 910 %[3] 910 %[3] 28 N/mm[4] 28 N/mm[4] 15 %[5] 15 %[5] Food-contact, General purpose
ELASTOSIL® R 401/40 S transparent transparent 38[1] 38[1] 9.6 N/mm²[2] 9.6 N/mm²[2] 770 %[3] 770 %[3] 28 N/mm[4] 28 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose
ELASTOSIL® R 401/50 S transparent transparent 50[1] 50[1] 12.0 N/mm²[2] 12.0 N/mm²[2] 640 %[3] 640 %[3] 27 N/mm[4] 27 N/mm[4] 17 %[5] 17 %[5] Food-contact, General purpose
ELASTOSIL® R 401/55 S transparent transparent 57[1] 57[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 400 %[3] 400 %[3] 19 N/mm[4] 19 N/mm[4] 35 %[5] 35 %[5] Food-contact, General purpose
ELASTOSIL® R 401/60 S transparent transparent 60[1] 60[1] 11.0 N/mm²[2] 11.0 N/mm²[2] 550 %[3] 550 %[3] 26 N/mm[4] 26 N/mm[4] 16 %[5] 16 %[5] Food-contact, General purpose
ELASTOSIL® R 401/70 S transparent transparent 70[1] 70[1] 11.3 N/mm²[2] 11.3 N/mm²[2] 530 %[3] 530 %[3] 31 N/mm[4] 31 N/mm[4] 22 %[5] 22 %[5] Food-contact, General purpose
ELASTOSIL® R 401/80 S transparent transparent 80[1] 80[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 450 %[3] 450 %[3] 26 N/mm[4] 26 N/mm[4] 41 %[5] 41 %[5] Food-contact, General purpose
ELASTOSIL® R 420/30 OH transparent transparent 27[1] 27[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 930 %[3] 930 %[3] 33 N/mm[4] 33 N/mm[4] 21 %[5] 21 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/40 S transparent transparent 39[1] 39[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 800 %[3] 800 %[3] 37 N/mm[4] 37 N/mm[4] 24 %[5] 24 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/50 S transparent transparent 53[1] 53[1] 11.0 N/mm²[2] 11.0 N/mm²[2] 730 %[3] 730 %[3] 41 N/mm[4] 41 N/mm[4] 23 %[5] 23 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/60 S transparent transparent 62[1] 62[1] 11.0 N/mm²[2] 11.0 N/mm²[2] 660 %[3] 660 %[3] 43 N/mm[4] 43 N/mm[4] 25 %[5] 25 %[5] Food-contact, High tear-resistant
ELASTOSIL® R 420/70 S transparent transparent 72[1] 72[1] 10.0 N/mm²[2] 10.0 N/mm²[2] 570 %[3] 570 %[3] 45 N/mm[4] 45 N/mm[4] 38 %[5] 38 %[5] Food-contact, High tear-resistant
Legend
[1] Hardness Shore A | DIN ISO 48-4,  [2] Tensile strength | ISO 37 type 1,  [3] Elongation at break | ISO 37 type 1,  [4] Tear strength | ASTM D 624 B,  [5] Compression Set | 22 h | 175 °C | DIN ISO 815-1 type B method A | post-cured 4 h / 200 °C,  [] Suited,  [] Well suited,  [] Ideally suited 

更多信息