Dieser Inhalt ist für Vereinigte Arabische Emirate bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

SILPURAN® 2112 A/B

Two-component, addition-curing silicone composition curing to a soft silicone adhesive


Properties

  • biocompatible, certificates of compatibility with USP Class VI and ISO 10993 available on request
  • no by-products from curing process
  • medium viscosity, easily pourable
  • mixing ratio 1 : 1
  • good adhesion, typical value 2.6 N/2.5 cm (90° peel test, on stainless steel)
  • high transparency

Specific features of SILPURAN® 2112 A/B

  • Addition Curing
  • Biocompatible
  • Suitable for skin contact
  • Two-component

 

 

 

 

 

 

 

 

 

 

Components A and B of SILPURAN® 2112 A/B are mixed homogeneously in a ratio A : B = 1 : 1 and vulcanise rapidly at temperatures over 100 °C.

 

SILPURAN® 2112 A/B has good adhesive properties that can be adjusted to suit the relevant requirements:
Increasing the proportion of component A results in a softer vulcanisate and increased tackiness. Increasing the proportion of component B results in a harder vulcanisate and reduced tackiness.

Important note:
The platinum catalyst is in component A.

Caution!
Only A and B components with the same batch number may be processed together!

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

更多产品

个产品 技术数据
dynamische Viskosität 动态粘度 锥入度
SILPURAN® 2100 A/B 34000 mPa·s[1] 34000 mPa·s[1] - - 205 1/10mm[3] 205 1/10mm[3]
SILPURAN® 2112 A/B 11600 mPa·s[1] 11600 mPa·s[1] - - 225 1/10mm[3] 225 1/10mm[3]
SILPURAN® 2114 A/B 12000 mPa·s[1] 12000 mPa·s[1] - - 200 1/10mm[3] 200 1/10mm[3]
SILPURAN® 2114 OT A/B 12000 mPa·s[1] 12000 mPa·s[1] - - 170 1/10mm[3] 170 1/10mm[3]
SILPURAN® 2117 A/B 33000 mPa·s[1] 33000 mPa·s[1] - - 205 1/10mm[3] 205 1/10mm[3]
SILPURAN® 2124 A/B - - 3200 mPa·s[2] 3200 mPa·s[2] 155 1/10mm[3] 155 1/10mm[3]
SILPURAN® 2130 A/B - - 1000 mPa·s[2] 1000 mPa·s[2] 220 1/10mm[3] 220 1/10mm[3]
说明
[1] dynamische Viskosität | DIN EN ISO 3219,  [2] 动态粘度 | DIN EN ISO 3219,  [3] 锥入度 | DIN ISO 2137 | hollow cone of 62.5 g, 60 s 

Order

My media


Go to order form

Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 (Phone)

My favorites

My products