ELASTOSIL® E50 TRANSPARENT
ELASTOSIL® E50 TRANSPARENT is a flowable silicone rubber with good mechanical properties, which cures at room temperature under the influence of atmospheric moisture.
Eigenschaften
- acetic acid-curing system
- flowable
- solventless
- excellent primerless adhesion to many substrates
- meets the physical requirements of MIL- A-46106, Group I, Type II and Group III, Type II
Spezifische Merkmale von ELASTOSIL® E50 TRANSPARENT
- MIL-A 46106 Type
- Selbstnivellierend
Datenblätter
General purpose sealant and adhesive
ELASTOSIL® E50 TRANSPARENT shows good primerless adhesion to many substrates. We recommend to run preliminary tests to optimize conditions for the particular application.
Skin forming time at 23°C / 50% rH: 10 - 15 min
Curing time at 23°C, 50% rH: 12 h/mm
Additional information
Tests according to the United States Military Standard (MIL-SPEC):
Wacker Chemie AG performs all test referring to MIL Spec according to its current test methods, lab conditions, quality methods, procedures, sampling, packaging, and so forth. These test methods, lab conditions, quality methods, procedures, sampling, packaging, and so forth need not necessarily be identical with the test methods, lab conditions, quality methods, procedures, sampling, packaging, and so forth listed in the above-mentioned specification.
Compliance with the above-mentioned MIL Spec is limited to certain properties (excluding heat resistance as mentioned in MIL-A-46106, Group III, Type II) and does not imply or state conformity to any other aspect of the referenced specification, including but not limited to sampling, marking, packaging, bar coding, testing, or sampling.
Verpackung / Gebinde
This product is available in 21 kg pails and 210 kg drums.
Lagerung
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
06612-060 Jandira
Brasilien
+55 11 4789-8345 (Fax)
Webseite
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Distributoren
WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.
04547-006 São Paulo