此内容适用于巴基斯坦。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
LUMISIL® 307 UV DAM A
LUMISIL® 307 UV DAM is a 2-part transparent silicone elastomer that is cured by UV condition for displays.
Eigenschaften
- Medium viscosity
- Low Modulus for easy alignment
- Excellent transparency
- Low shrinkage
- Fast curing by UV
Spezifische Merkmale von LUMISIL® 307 UV DAM A
- Additionsvernetzend
- hochtransparent
- kein chemischer Schrumpf
- UV-vernetzend
- zweikomponentig
Datenblätter
All surfaces must be clean and free of contaminants that will inhibit the cure of the product.
Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.
If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.
Part A : Part B (ELASTOSIL® CAT UV) = 10 : 1
Curing speed can be adjusted by UV power and time.
Also heating after UV exposure can accelerate curing process.
We recommend running preliminary tests to optimize conditions for particular application.
- Recommand Lamp type: UV-A (ex. Mercury, Metal Halide etc.), 365 nm LED (If the applies lamp is 365nm LED lamp, the higher UV irradiance would be better)
Lagerung
The 'Best use before end' date of each batch appears on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case, however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
0001 Dubai
阿拉伯联合酋长国
+971 4 709-9911 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.