此内容适用于西班牙。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
WACKER® eco AK 350
WACKER® eco AK 350 ist ein lineares, nichtreaktives Polydimethylsiloxan mit einer Viskosität von circa 350 mm²/s, basierend auf erneuerbaren Rohstoffen gemäß TÜV NORD Standard REDcert².
Aufgrund seiner chemischen Struktur verfügt WACKER® eco AK 350 über ein besonderes Eigenschaftsspektrum und hebt sich dadurch von organischen Materialien, wie beispielsweise Mineralölen, ab.
特性
WACKER® eco AK 350 is a clear, odorless and colorless liquid.
• minimal change in physical properties over a broad temperature range
• excellent water-repellent properties
• good dielectric properties
• low surface tension and thus high surface activity chemically highly unreactive
• low solidifying point
• good solubility in a wide range of solvents
数据表
• release agent
• lubricant
• hydraulic fluid
• antifoam agent
• water-repellent agent
• liquid dielectric for electrical and electronic equipment
• heat-transfer oil
• polish additive
• plastics additive
• additive for textile and fiber auxiliaries
For pharmaceutical applications, we recommend specialty silicone fluids from our SILFAR® line.
Silicone fluids from our BELSIL® line are available for the cosmetic sector.
Whenever particularly high heat and shear resistance is required, we recommend silicone fluids from our AK stab, AK visc and AKC product lines.
Specialty grades of the product (available as WACKER® PLASTICIZER) will be needed for use as a silicone plasticizer in RTV-1 sealants.
Processing
Due to WACKER® eco AK 350 many diverse applications, no general processing information can be provided.
Parameters will vary from application to application.
Available in a range of viscosities, WACKER® SILICONE FLUIDS AK are miscible with each other in any ratio. The standard product's viscosity can thus be altered to suit your individual needs.
WACKER® eco AK 350 is a non-polar liquid and is immiscible with polar solvents such as water or short-chain alcohols.
In aliphatic and aromatic hydrocarbons, chlorohydrocarbons, ethers, esters, ketones and higher alcohols, WACKER® eco AK 350 is soluble in any proportion.
Before the product is used with solvents for the first time, it is advisable to perform a lab-scale test.
When solvents are used, please remember to read the appropriate hazard information.
储存
Maximum temperature allowed during storage and transportation: 50 °C
A temporary increase in temperature during transport does not impair quality. Actively cooled transport guide can be dispensed with.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable.
In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
08008 Barcelona
西班牙
+34 93 21757-66 （传真）
网站