Dieser Inhalt ist für Deutschland bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

Dieses Produkt ist in Deutschland nicht verfügbar. Bitte nutzen Sie die Produktsuche oder kontaktieren Sie uns.

ELASTOSIL® M 4670 US A/B

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.


Eigenschaften

  • High Shore A hardness (approx. 55)
  • Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
  • Good flow
  • Excellent long-term stability of the mechanical properties of the vulcanizate
  • High tear strength
  • Outstanding resistance to common casting resins

Datenblätter

Due to its outstanding resistance to casting resins as
well as its superior mechanical properties,
ELASTOSIL® M 4670 US A/B is perfectly suitable for all molds of models with only slight undercuts that are to be reproduced in casting resins, and a high inherent rigidity of the molds is required.

 

As a high-Shore addition-curing RTV-2 silicone rubber that cures without undergoing dimensional shrinkage, ELASTOSIL® M 4670 US A/B is also extremely suitable for casting all other common reproduction materials, particularly if absolutely accurate copies of models with slight undercuts are required.

Important
The platinum catalyst is contained in component A.

Caution
Only components A and B that have the same lot
number may be processed together!

To ensure both optimum flow and homogeneity of the
material, the components must be stirred thoroughly
before they are removed or processed in their
containers, in order to uniformly disperse any fillers
that might have settled during storage.

The tables below indicate the pot lives and tack-free
times at various temperatures.

The pot life figures indicate the time required for the
mix to reach a viscosity of 150,000 mPa s.
The curing times apply to a layer thickness of 1 cm.

Comprehensive instructions are given in our leaflet
"Wacker RTV-2 Silicone Rubber - Processing."
Detailed information on other mold-making compounds
in the ELASTOSIL® M range is contained in our
brochure “ELASTOSIL® M. Mold-Making Compounds
For Maximum Precision”.

Lagerung

ELASTOSIL® M 4670 US A/B has a shelf life of at least 12 months when stored between 5 °C and 30 °C in the originally sealed container. The 'Best use before end' date of each batch appears on the product label.

 

Storage beyond the date specified on the label does
not necessarily mean that the product is no longer
usable. In this case however, the properties required
for the intended use must be checked for quality
assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Bitte wählen Sie eine Anwendung um Ihnen passende Produkte anzeigen zu können.

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 (Phone)

Meine Favoriten

Meine Produkte