This content is for United Kingdom. Our system has detected that you are from United States. Do you want to set United States as your new country?

LUMISIL® 307 IM UV A

LUMISIL® 307 IM UV is a 2-part transparent optically clear resin(OCR) and DAM that is cured by UV condition for displays.


Eigenschaften

  • Customized DAM grade to match with LUMISIL 203 IM UV

  • 1:1 mixing ratio for processability

  • No oxygen inhibition

  • Excellent stress relaxation with high elongation and damping factor by long chain structure

  • Stable bonding for various substrates with stable cohesive failure mode

  • Excellent optical stability

  • Low shrinkage

Spezifische Merkmale von LUMISIL® 307 IM UV A

  • Additionsvernetzend
  • Fließfähig
  • hochtransparent
  • kein chemischer Schrumpf
  • UV-vernetzend
  • zweikomponentig
  • Optical bonding for touch screen panel
  • Encapsulation of optical & electronic components
  • Production of damping elements

All surfaces must be clean and free of contaminants that will inhibit the cure of the product.

Examples of inhibiting contaminants are sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds – especially organotin compounds.

If a substrate’s ability to inhibit cure is unknown, a small-scale test should be run to determine compatibility.

Curing speed can be adjusted by UV power and time. 

Also heating after UV exposure can accelerate curing process.

We recommend running preliminary tests to optimize conditions for particular application.

  • Recommand Lamp type: UV-A (ex. Mercury, Metal Halide etc.), 365 nm LED (If the applies lamp is 365nm LED lamp, the higher UV irradiance would be better)

Verpackung / Gebinde

LUMISIL 307 IM UV (DAM) A 1KG BOTTLE PE

LUMISIL 307 IM UV (DAM) A 9KG BOTTLE PE

LUMISIL 203 IM UV B (common B) 1KG BOTTLE PE

LUMISIL 203 IM UV B (common B) 9KG BOTTLE PE

Lagerung

The 'Best use before end' date of each batch appears on the product label.


Storage beyond the date specif ied on the label does not necessarily mean that the product is no longer usable.

In this case, however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 (Phone)

Meine Favoriten

Meine Produkte