POWERSIL® 3500 MH
HTV silicone rubber POWERSIL® 3500 MH is an addition-curing one-component compound for the manufacture of press cured articles. The vulcanizates are tracking resistant and show good to very good mechanical properties.
No peroxide split products are released during cure or post cure.
Cure system is significantly faster compared to peroxide curing materials.
Cure time is reduced to 30 - 50 % depending on the wall thickness.
Eigenschaften
Spezifische Merkmale von POWERSIL® 3500 MH
- Additionsvernetzend
- kriechstromfest
Datenblätter
???000010149??? is to be press cured. The material can be processed on conventional silicone rubber injection molding equipment.
Caution, danger of desactivation!
The Pt-catalyst can be desactivated already via air e.g. by amines, sulfur compounds.
Verpackung / Gebinde
This product is available in 20 kg and 540 kg cardboard packaging.
Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulphur or phosphorus compounds.
Caution
Permanent transportation and storage at elevated temperature leads to a partly crosslinking and makes the material unusable.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.