Dieser Inhalt ist für Deutschland bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

Dieses Produkt ist in Deutschland nicht verfügbar. Bitte nutzen Sie die Produktsuche oder kontaktieren Sie uns.

VINNAPAS® 5814 H (Scale-up product)

VINNAPAS® 5814 H (Scale-up product)  is a strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for skim coat (wall putty), waterproofing, renders (wall plasters), grouts. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® H. It reduces water absorption and improve mechanical properties and can be used in many applications where reduced water absorption is desired. VINNAPAS® 5814 H (Scale-up product) is in the process of introduction into industrial use (Scale-up Product). Therefore the product data given are subject to change. Always consult WACKER about the product’s availability before using it for industrial purposes.


Eigenschaften

•VINNAPAS® 5814 H (Scale-up product) is a copolymer powder based on vinyl acetate and ethylene and is dispersible in water.
•Dry-mix mortars modified withVINNAPAS® 5814 H (Scale-up product) exhibit reduced water absorption and improved adhesion, flexural strength and abrasion resistance.
•VINNAPAS® 5814 H (Scale-up product) will not have any negative effect on water-vapor transmission.
•VINNAPAS® 5814 H (Scale-up product) contains a fine mineral filler as an antiblocking agent. It is produced without the addition of organic solvents, plasticizers or film-forming agents.
•VINNAPAS® 5814 H (Scale-up product) is suitable for formulating drymix mortar that exhibit reduced water absorption and improved mechanical properties.

For typical application fields of VINNAPAS® 5814 H (Scale-up product), refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5814 H (Scale-up product) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

Verpackung / Gebinde

25 kg paper bags
Big Bags or bulk on request.

Lagerung

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Distributoren

WACKER verfügt weltweit über ein Netzwerk fachkundiger Vertriebspartner. Bitte wählen Sie noch eine Anwendung aus damit wir Ihnen Ihre Ansprechpartner nennen können.

IMCD Deutschland GmbH
Konrad-Adenauer-Ufer 41-45
50668 Köln
49  221  77650 (Phone)
49 221 776520  (Fax)
Kontakt Händler Webseite

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

Meine Favoriten

Meine Produkte