Dieser Inhalt ist für Bangladesh bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

WACKER® GA (2)

WACKER® GA is a one-part, neutral-curing, low-modulus DIY silicone sealant with outstanding adhesion, long shelf life and excellent tooling characteristics.

WACKER® GA cures at room temperature under the action of atmospheric moisture to give a permanently flexible silicone rubber.


Properties

•  Non-sag

•  Ready gunnability at low (+5 Grad C) and high (+40 Grad C) temperature

•  Flexible at low (-40 Grad C ) and high temperatures (+150 Grad C )

•  Excellent weatherablity

•  Almost odorless

•  Excellent tooling characteristics for professional use

•  Non-corrosive to metals

•  Suitable for alkaline substrates such as concrete, mortar, fibrous cement

Aplications

 

•   DIY applications (cars, boat, caravan, house)

 

Restrictions on use

 

 may be discolored in contact with some organic elastomers, e.g. EPDM, APTK and neoprene.

 

 is not recommended for use on natural stone, such as marble, granite, quartzite, as it can cause staining.

must not be used for sealing of auqaria.

is not recommended for structural glazing bonding.

 

The curing time can be extended at lower temperature, lower humidity or by low volume of air exchange.

 

Preparation

 

The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material, dust, dirt, rust, oil and other contaminants. Non-porous substrates should be cleaned with a solvent and a clean, lint-free, cotton cloth. Wipe dry immediately with another such cloth before the solvent evaporates from the surface.

 

Adhesion

 

 exhibits excellent primerless adhesion to most non-porous siliceous material, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker; impregnated, varnished or painted wood; and some plastics.

Users must carry out their own tests due to the great variety of substances.

The adhesion can be improved in many cases by pretreatment of the substrates with a primer.

If adhesion difficulties arise please contact our technical service.

 

Storage

WACKER® GA has a shelf life of at least 15 months when stored at a cool dry place (below  25 Grad Celsius).

The 'Best use before end' date of each batch is shown on the product label.

 

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Distributors

No distributors were found for this product

Mehr Produkte

Produkte Technische Daten
zulässige Gesamtverformung Dichte Modul bei 100% Dehnung
WACKER ® HS - HYBRID SEALANT - - 1,4 g/cm³[1] 11,684 lb/gal[1] 0,7 N/mm²[3] 0,7 N/mm²[3]
WACKER® GA (2) 20 %[5] 20 %[5] 1,01 g/cm³[2] 8,429 lb/gal[2] - -
WACKER® HA - HYBRID ADHESIVE - - 1,6 g/cm³[1] 13,353 lb/gal[1] 3,0 N/mm²[3] 3,0 N/mm²[3]
WACKER® WN - WEATHERSEAL NEUTRAL 2 50 %[6] 50 %[6] 1,37 g/cm³[2] 11,433 lb/gal[2] 0,54 N/mm²[3] 0,54 N/mm²[3]
WACKER® WS - WEATHERSEAL SUPERIOR 30,0 %[7] 30,0 %[7] 1,28 g/cm³[1] 10,682 lb/gal[1] 0,49 N/mm²[4] 0,49 N/mm²[4]
Legend
[1] Dichte | 23 °C | ISO 1183-1 A,  [2] Dichte | ISO 1183-1 A,  [3] Modul bei 100% Dehnung (joint) | ISO 8339,  [4] Modul bei 100% Dehnung Fuge | 100,0 % | ISO 8339,  [5] zulässige Gesamtverformung | ISO 11600,  [6] zulässige Gesamtverformung | ASTM C920,  [7] zulässige Gesamtverformung | ISO 9047 

Order

My media


Go to order form

Sales Contact

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 (Phone)

My favorites

My products