Dieser Inhalt ist für Uganda bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

SEMICOSIL® 986/1K

SEMICOSIL® 986/1K is a non-slump, thermally curable, addition curing one-part silicone rubber.


Eigenschaften

  •  ready-to-use, one-part system
  •  thixotropic
  •  translucent
  •  medium hardness
  •  high flexibility (low-stress-adhesive)
  •  primerless adhesion to many substrates
  •  rapid heat cure
  •  ultraviolett fluorescing

 

 

 

 

 

Surface preparation
All surfaces must be clean and free of contaminants that will inhibit the cure of SEMICOSIL® 986/1K. Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.


Dispensing
Because of the thixotropy (shear thinning effect) SEMICOSIL® 986/1K can be dispensed easily with all dispensing equipments. Since silicones dissolve notable amounts of air, an in-line degassing is recommended.

Curing
SEMICOSIL® 986/1K works best when cured at 115 °C or more depending on the size and heat sink properties of the components.


Temperature Curing time, thickness 10 mm
100°C 6 h
130°C 30 min
150 °C 10 min

Adhesion
SEMICOSIL® 986/1K shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

SEMICOSIL® 986/1K should be stored  between +5 and +25°C in its tightly closed containers.


Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
Vereinigte Arabische Emirate
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Bitte wählen Sie eine Anwendung um Ihnen passende Produkte anzeigen zu können.

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
+49  711  61942-0 (Phone)

Meine Favoriten

Meine Produkte