ELASTOSIL® RT 713
ELASTOSIL® RT 713 is a non-slump, addition-crosslinking, thermal-curing, one-component silicone rubber.
特性
- non-slump
- rapid heat cure
- low density
- ergibt weiche Vulkanisate
- high compressibility
- ausgezeichnete Haftung auf vielen Substaten ohne Grundierung
ELASTOSIL® RT 713的特殊性能
- Additionsvernetzend
- einkomponentig
- komprimierbar
- Schaum
- Schnelle Aushärtung unter Hitze
- standfest
- general-purpose sealant
- FIPG und CIPG Anwendungen
Surface preparation
All surfaces must be clean and free of contaminants that will inhibit the cure of ELASTOSIL® RT 713. Examples of inhibiting contaminants are sulfur containing materials, plasticizers, urethanes, amine containing materials and organometallic compounds – especially organotin compounds. If a substrate’s ability to inhibit cure is unknown, a small scale test should be run to determine compatibility.
Dispensing:
Because of the high thixotropy (shear thinning effect) ELASTOSIL® RT 713 can be dispensed easily with all dispensing equipments.
Curing:
ELASTOSIL® RT 713 works best when cured at 115 °C or more depending on the size and heat sink properties of the components.
ELASTOSIL® RT 713 shows good primerless adhesion to many substrates (metals, glass, ceramics, plastics). We recommend running preliminary tests to optimize conditions for the particular application.
储存
销售和支持
Mumbai 400063
Indien
+91 22 42365-570 （传真）
网站