Dieser Inhalt ist für Niederlande bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

VINNAPAS® 5129 L

VINNAPAS® 5129 L  is a dispersible polymer powder for dry mix mortars, specifically suited for self-leveling flooring compounds and screeds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® L which means that it improves the leveling and surface properties as well the stabilization of the fresh mortar.  Cured mortars with VINNAPAS® 5129 L have improved adhesion, flexural strength, deformability and abrasion resistance. 


Properties

  • VINNAPAS® 5129 L is a copolymer powder based on vinyl acetate and ethylene and is dispersible in water.
  • VINNAPAS® 5129 L is a polymeric binder. Blended with inorganic binders, the powder will provide very good workability flexibility, deformability and abrasion resistance.
  • Particularly advantageous is the combination of VINNAPAS® 5129 L and polycaboxylate ethers (PCE) and other synthetic super plasticizers or casein to produce self-leveling flooring compounds and screeds.
  • VINNAPAS® 5129 L achieves smooth surfaces that are free of surface voids.
  • VINNAPAS® 5129 L contains a fine mineral filler as an antiblocking agent.
  • It is produced without the use of plasticizers and film-forming agents.
  • VINNAPAS® 5129 L is a leveling dispersible polymer powder in the medium Tg range and it is suitable for applications with low emissions.

For typical application fields of VINNAPAS® 5129 L, refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5129 L with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker-Chemie Benelux B.V.
Heiligeweg 166
1561 DM Krommenie
Netherlands
+31  75  64760-00 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Produkte Technische Daten
Mindesttemperatur Filmbildung
VINNAPAS® 4220 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 4410 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 5023 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 5025 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 5111 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 5129 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 5222 L 4 °C[1] 39,2 °F[1]
VINNAPAS® 7016 F 7 °C[1] 44,6 °F[1]
Legend
[1] Mindesttemperatur Filmbildung | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
+91  22  42365-500 (Phone)

My favorites

My products