This content is for Poland. Our system has detected that you are from United States. Do you want to set United States as your new country?

VINNAPAS® 5010 N (KOR)

VINNAPAS® 5010 N (KOR) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, plasters and Skim Coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (KOR) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.


Properties

  • VINNAPAS® 5010 N (KOR) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Compounds modified with VINNAPAS® 5010 N (KOR)  exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected.
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 5010 N (KOR)  contains a fine mineral filler as an antiblocking agent.
  • It is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5010 N (KOR) is a hard general-purpose powder and has no effect on rheological properties. It is eminently suitable for formulating compounds of high ultimate strength and low emissions.

Specific features of VINNAPAS® 5010 N (KOR)

  • Adhesion on critical surfaces

For typical application fields of VINNAPAS® 5010 N (KOR), refer to the section "application". Please discuss additional applications with your WACKER customer representative.

 

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5010 N (KOR) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties.

The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

Wird das Produkt in anderen Anwendungen als den aufgeführten eingesetzt, liegen Auswahl, Verarbeitung und Verwendung des Produktes in der alleinigen Verantwortung des Abnehmers. Dabei sind alle gesetzlichen und sonstigen Regelungen zu berücksichtigen. 

Es können leichte Farbschwankungen des Polymergranulats auftreten, die die Funktion des Produktes nicht beeinträchtigen. 

Packaging

25 kg paper bags

Big Bags or bulk on request.

Storage

Das Produkt ist während der Lagerung vor der Einwirkung von Feuchtigkeit zu schützen. Eine längere Lagerung bei Temperaturen über 30°C, auch in Verbindung mit Druckbelastung, Feuchtigkeit oder Sonneneinstrahlung, kann zur Verblockung führen. Offene Gebinde sollten sorgfältig verschlossen und ebenfalls entsprechend gelagert werden. Daher empfiehlt sich ein Lagerhaus, in dem das Produkt kühl und trocken aufbewahrt werden kann. Lagern Sie das Produkt nicht länger als sechs Monate, beginnend mit dem Eingangsdatum, es sei denn, das Analysezertifikat enthält ein anderes Datum, welches dann Vorrang hätte. Eine Lagerung über den empfohlenen Zeitpunkt hinaus bedeutet nicht, dass das Produkt unbrauchbar geworden ist. Eine Überprüfung der für den vorgesehenen Einsatzzweck erforderlichen Eigenschaften durch den Anwender ist dann jedoch ratsam.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

IMCD Polska Sp.z o.o.
ul. Domaniewska 32
P-02-672 Warsaw
48  22  2236700 (Phone)
48 22 223 67 90   (Fax)
Contact distributor Website

Order

My media


Go to order form

Sales Contact

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
+91  22  42365-500 (Phone)

My favorites

My products