此内容适用于英国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
SEMICOSIL® 988/1K GREY
SEMICOSIL® 988/1K GREY is a non-slump, thermally curable, addition curing one-part silicone rubber.
Eigenschaften
Ready-to-use, one-part system
Low viscosity during dispensing
Low thermal stress sealing adhesive
Modulus, Medium hardness
High flexibility
Excellent primerless adhesive to many substrates
Datenblätter
1 Leerzeile
SEMICOSIL® 988/1K GREY haftet ohne Grundierung auf vielen Substraten. Der Verarbeiter muss durch eigene Versuche die für die jeweilige Anwendung optimalen Bedingungen selbst ermitteln.
- FIPG und CIPG Anwendungen
Dispensing
Because of the high thixotropy (shear thinning effect) SEMICOSIL® 988/1K grey can be dispensed easily with all dispensing equipments.
Since silicones dissolve notable amounts of air, an in-line degassing is recommended.
Dispensing
Because of the high thixotropy (shear thinning effect)
SEMICOSIL® 988/1K GREY can be dispensed easily with all dispensing equipments.
Since silicones dissolve notable amounts of air, an in-line degassing is recommended.
Curing
SEMICOSIL® 988/1K grey works best when cured at
125 °C or more. Curing time should be adapted to the size and heat sink properties of the components and parts. Typical values are shown in the corresponding table.
Lagerung
SEMICOSIL® 988/1K GREY should be stored between +5 and +25°C in its tightly closed container.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Kolkata 743503
Indien
+91 33 24072-502 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.