ELASTOSIL® RT 745 "S" A/B

ELASTOSIL® RT 745 "S" A/B is a pourable, thermally curable, addition-curing, two-part silicone rubber.


Properties

  • two-part, 1 : 1 mixing ratio
  • very low hardness
  • low risk of inhibition
  • rapid heat cure
  • primerless adhesion

Achtung: Es dürfen nur A- und B-Komponenten miteinander verarbeitet werden, die dieselbe Chargennummer aufweisen!





*


1 Leerzeile
1 Leerzeile


1 Leerzeile

1 Leerzeile
1 Leerzeile
Curing ELASTOSIL® RT 745 "S" A/B works best when cured at 100 °C or more depending on the size and heat sink properties of the components.
1 Leerzeile
1 Leerzeile
The reactivity can be adjusted within wide limits by adding Catalyst EP or Inhibitor PT 88 to suit the processing requirements of the particular application. Catalyst EP increases the reactivity, i. e., pot life and curing time are reduced. Inhibitor PT 88 is a pot life extender and prolongs pot life and curing time. Further information is given in our leaflet “Catalyst EP/Inhibitor PT88”.

1 Leerzeile
We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions are given in our leaflet "Wacker RTV-2 Silicone Rubber - Processing".


- Verguss von Elektrobauteilen


Storage

The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
United States
+1  888  922-5374 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
+971  4  709-9999 (Phone)

My favorites

My products