Dieser Inhalt ist für Singapur bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?
ELASTOSIL® M 4644 A/B
Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
Main application: Vacuum casting for rapid prototyping.
Eigenschaften
- good flow
- fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
- medium Shore A hardness (approx. 40)
- good transparency of the cured rubber
- high tear strength
- outstanding resistance to casting resins, particularly polyurethanes and epoxies, for very long service life of the molds
- slightly oil-bleeding
Spezifische Merkmale von ELASTOSIL® M 4644 A/B
- Addition Curing
- Excellent mechanical properties
- Flowable
- Highly transparent
- No chemical shrinkage
- Resistance against PU
- Slightly oil bleeding
- Two-component
High-performance silicone mold-making compound which is particularly suitable for reproducing models with undercuts in polyurethane or epoxy resins.
Main field of application: Vacuum casting for rapid prototyping.
Detailed instructions for preparation and use are given in the brochure “Room Temperature Vulcanizing (RTV) Silicones - Material and Processing Guidelines”.
Important note:
The platinum catalyst is in component A.
Caution:
A and B components may only be used together if they have the same batch number.
Lagerung
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Kolkata 743503
India
+91 33 24072-502 (Fax)
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.