SEMICOSIL® 979 EC


Eigenschaften

  • Low volume resistivity
  • Thixotropic paste
  • Solvated
  • Excellent adhesion to many substrates

The surface should be clean and free from any contamination. Rubber surfaces may be lightly rubbed with a fine grit sand paper and then wiped clean with a solvent to improve adhesion. SEMICOSIL® 979 EC is not recommended for use with acrylic or polycarbonate substrates.

SEMICOSIL® 979 EC can be readily dispensed using conventional pail pumps equipped with a high pressure flexible fluid hose and extrusion gun. Cartridges may be dispensed with a manual or pneumatic caulking gun. Material may be spread with a spatula either from the pails or cartridges.

Lagerung

The "Best use before end date" of each batch is shown on the Certificate of Analysis. Storage beyond the date specified on the Certificate of Analysis does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

More products

Please choose an application for viewing your product matches.

Bestellen

Meine Medien


Vertriebskontakt

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

Meine Favoriten

Meine Produkte