Dieser Inhalt ist für Indien bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

VINNAPAS® 5016 N (PRC)

VINNAPAS® 5016 N (PRC) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and skim coat. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5016 N (PRC) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.


Properties

  • VINNAPAS® 5016 N (PRC) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Compounds modified with VINNAPAS® 5016 N (PRC) exhibit improved adhesion, flexural strength, deformability, abrasion resistance and are easier to process. Leveling, thixotropy and water retention are essentially unaffected.
  • The product is ideal for use in combination with other mortar additives intended to enhance specific properties.
  • VINNAPAS® 5016 N (PRC) contains a fine mineral filler as an antiblocking agent. It is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5016 N (PRC) is a hard general-purpose powder and has no effect on rheological properties. It is eminently suitable for formulating compounds of high ultimate strength and low emissions.

For typical application fields of VINNAPAS® 5016 N (PRC) refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5016 N (PRC) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemie India Pvt. Ltd.
Goregaon E,
Mumbai 400063
India
+91  22  42365-500 (Phone)
+91 22 42365-570  (Fax)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

Parkash Dye Chem
Ashok Vihar Road,Nr.Bharat Nagar
302543 New Delhi
91  11  2366700010 (Phone)
Contact distributor Website
Ramniklal S. Gosalia & Co.
B. J. Marg, Jacob Circle
1347490 Mumbai
91  22  23063821 (Phone)
91 22 23063827  (Fax)
Contact distributor Website
Shah Enterprise
1014, Shantiniketan, 8, Camac Str.
1248272 Kolkata, West Bengal
Contact distributor

Mehr Produkte

Produkte Technische Daten
Mindesttemperatur Filmbildung
VINNACEL® 315 4 °C[1] 39,2 °F[1]
VINNACEL® 325 4 °C[1] 39,2 °F[1]
VINNACEL® 510 4 °C[1] 39,2 °F[1]
VINNAPAS® 4023 N (KOR) 1 °C[1] 33,8 °F[1]
VINNAPAS® 3030 H 0 °C[1] 32,0 °F[1]
VINNAPAS® 4023 N (GER) 1 °C[1] 33,8 °F[1]
VINNAPAS® 4115 N (KOR) 4 °C[1] 39,2 °F[1]
VINNAPAS® 4121 N 1 °C[1] 33,8 °F[1]
VINNAPAS® 4419 E (Scale-up Product) 4 °C[1] 39,2 °F[1]
VINNAPAS® 5005 N 11 °C[1] 51,8 °F[1]
VINNAPAS® 5010 N (KOR) 4 °C[1] 39,2 °F[1]
VINNAPAS® 5016 N (PRC) 4 °C[1] 39,2 °F[1]
VINNAPAS® 5048 H 0 °C[1] 32,0 °F[1]
VINNAPAS® 5518 H 4 °C[1] 39,2 °F[1]
VINNAPAS® 5710 N (GER) (Scale-up Product) 4 °C[1] 39,2 °F[1]
VINNAPAS® 5814 H (Scale-up product) - -
VINNAPAS® 7031 H 0 °C[1] 32,0 °F[1]
VINNAPAS® 7220 E 5 °C[1] 41,0 °F[1]
VINNAPAS® 7410 E 4 °C[1] 39,2 °F[1]
VINNAPAS® 8031 H 0 °C[1] 32,0 °F[1]
VINNAPAS® 8034 H 0 °C[1] 32,0 °F[1]
VINNAPAS® 8118 E 4 °C[1] 39,2 °F[1]
VINNAPAS® 8620 E 5 °C[1] 41,0 °F[1]
VINNAPAS® 8819 E (Scale-up Product) 4 °C[1] 39,2 °F[1]
Legend
[1] Mindesttemperatur Filmbildung | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

My favorites

My products