ELASTOSIL® R 760/70 MH

ELASTOSIL® R 760/70 is a peroxide curing silicone rubber with very high green-strength, which enhances calendering and extrusion performance significantly. Uncured extruded hoses show high dimension stability and non-sticky surface.


Eigenschaften

ELASTOSIL® R 760/70 is a high green-strength peroxide curing silicone rubber.

 

The addition of heat stabilizers at service temperatures of more than 180 °C is recommended.

 

Further information about an improvement of the heat stability by use of specific ELASTOSIL® AUX Heat Stabilizers can be obtained from the Technical Information Sheet "ELASTOSIL® AUX Stabilizers H" or the latest edition of our brochures.

Spezifische Merkmale von ELASTOSIL® R 760/70 MH

  • hohe Fellfestigkeit
  • niedriger Druckverformungsrest

ELASTOSIL® R 760/70 is particularly suitable for the economical production of turbo charger hoses which are used in the automotive industry.

For detailed information please refer to the latest edition of our brochure "SOLID AND LIQUID SILICONE RUBBER - MATERIAL AND PROCESSING GUIDELINES".

Verpackung / Gebinde

Special delivery forms are possible but depend on several technical and commercial aspects. Please contact your local sales manager in such cases.

Lagerung

Please store the cardboard boxes in a dry and cool place. Already opened boxes should be closed again to avoid any contamination. The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
USA
+1  888  922-5374 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Produkte Technische Daten
Härte Shore A Reißfestigkeit Reißdehnung Weiterreißwiderstand Druckverformungsrest
ELASTOSIL® R 760/70 MH 70[1] 70[1] 10,7 N/mm²[2] 10,7 N/mm²[2] 530 %[3] 530 %[3] 27 N/mm[4] 27 N/mm[4] 9 %[5] 9 %[5]
Legend
[1] Härte Shore A | DIN ISO 48-4,  [2] Reißfestigkeit | ISO 37 Type 1,  [3] Reißdehnung | ISO 37 Type 1,  [4] Weiterreißwiderstand | ASTM D 624 B,  [5] Druckverformungsrest | 22 h | 175 °C | DIN ISO 815-1 Typ B Methode A | post-cured 4 h / 200 °C 

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemical Corporation
S State Road 4950
Ann Arbor, MI 48108
+1  888  922-5374 (Phone)

Meine Favoriten

Meine Produkte