ELASTOSIL® RT 745 "S" A/B
ELASTOSIL® RT 745 "S" A/B is a pourable, thermally curable, addition-curing, two-part silicone rubber.
Eigenschaften
- two-part, 1 : 1 mixing ratio
- very low hardness
- low risk of inhibition
- rapid heat cure
- primerless adhesion
Datenblätter
Achtung: Es dürfen nur A- und B-Komponenten miteinander verarbeitet werden, die dieselbe Chargennummer aufweisen!
*
1 Leerzeile
1 Leerzeile
1 Leerzeile
1 Leerzeile
1 Leerzeile
Curing ELASTOSIL® RT 745 "S" A/B works best when cured at 100 °C or more depending on the size and heat sink properties of the components.
1 Leerzeile
1 Leerzeile
The reactivity can be adjusted within wide limits by adding Catalyst EP or Inhibitor PT 88 to suit the processing requirements of the particular application. Catalyst EP increases the reactivity, i. e., pot life and curing time are reduced. Inhibitor PT 88 is a pot life extender and prolongs pot life and curing time. Further information is given in our leaflet “Catalyst EP/Inhibitor PT88”.
1 Leerzeile
We recommend running preliminary tests to optimize conditions for the particular application. Comprehensive processing instructions are given in our leaflet "Wacker RTV-2 Silicone Rubber - Processing".
- Verguss von Elektrobauteilen
Lagerung
The 'Best use before end' date of each batch is shown on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.