此内容适用于孟加拉国。系统检测到您来自美国。您希望将 美国设置为您的新国家吗？
SEMICOSIL® 988/1K GREY
SEMICOSIL® 988/1K GREY is a non-slump, thermally curable, addition curing one-part silicone rubber.
Properties
Ready-to-use, one-part system
Low viscosity during dispensing
Low thermal stress sealing adhesive
Modulus, Medium hardness
High flexibility
Excellent primerless adhesive to many substrates
Data sheets
- FIPG and CIPG applications
Dispensing
Because of the high thixotropy (shear thinning effect) SEMICOSIL® 988/1K grey can be dispensed easily with all dispensing equipments.
Since silicones dissolve notable amounts of air, an in-line degassing is recommended.
Dispensing
Because of the high thixotropy (shear thinning effect)
SEMICOSIL® 988/1K GREY can be dispensed easily with all dispensing equipments.
Since silicones dissolve notable amounts of air, an in-line degassing is recommended.
Curing
SEMICOSIL® 988/1K grey works best when cured at
125 °C or more. Curing time should be adapted to the size and heat sink properties of the components and parts. Typical values are shown in the corresponding table.
Storage
SEMICOSIL® 988/1K GREY should be stored between +5 and +25°C in its tightly closed container.
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Sales and support
Kolkata 743503
India
+91 33 24072-502 (Fax)
How can we help you?
- Do you need help in choosing a product or do you require technical support? If so, please contact our experts.