This content is for Denmark. Our system has detected that you are from United States. Do you want to set United States as your new country?
CENUSIL® M 820 A/B
Pourable, addition-curing RTV-2 silicone rubber that cures at room temperature.
Main application: Making molds for (concrete) casting.
Eigenschaften
- Excellent flowabily
- High tear strength
- Low hardness /Shore A 20)
- Mixing ratio of 1:1 for straightforward processing
- Fast and non shrink cure at room temperature which can be accelerated considerably by application of heat
- Excellent long-term stability of the mechanical properties of the vulcanizate
- Good resistance to common reproduction materials
Spezifische Merkmale von CENUSIL® M 820 A/B
- Addition Curing
- Fast curing at room temperature
- Flowable
- No chemical shrinkage
- Two-component
Due to its good resisitance to all common reproduction materrials. e.g. casting resins, concrete, as well as the superior mechanical properties, CENUSIL® M 820 A/B is especially suittable for all molds of models with
extensive undercuts.
As a low-Shore A addition silicone rubber that cures without undergoing dimensional shrinkage, CENUSIL® M 820 A/B is also suitable if absolutely accurate copies of models are required.
Verpackung / Gebinde
- CENUSIL® M 820 A 20 KG HOBBOCK PE
- CENUSIL® M 820 A 200 KG DRUM SB
- CENUSIL® M 820 B 20 KG HOBBOCK SB
- CENUSIL® M 820 B 200 KG DRUM SB
Lagerung
The "Best use before end" date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product in no longer usable. In this case however, the properties required for the intended use must be checked for qualitiy assurance reasons.
Vertrieb & Support
Wie können wir Ihnen helfen?
- Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.