NEXIVA® powder paint 200

NEXIVA® powder paint 200 is a powder architectural paint, water dispersible, that offers paint manufactures the possibility of making their supply chain more flexible, with reduced operating costs, without compromising the applications and shelf life of the product. The product is in process of introduction into industrial use. Therefore, the product data given are subject to change. Always consult WACKER POLYMERS about the product’s availability before using it for industrial purposes


Properties

NEXIVA® powder paint 200 provides the following advantages to paint manufacturers:

  • NEXIVA® powder paint 200 is a formulated architectural powder paint based on vinyl acetate-ethylene.
  • It is compliant with ABNT NBR 15709-1 as a premium grade.
  • As vinyl acetate-ethylene polymers don’t require the use of coalescent for film forming, NEXIVA® powder paint 200 is formulated in a very low VOC level (<1g/L).
  • The absence of water of NEXIVA® powder paint 200 allow for easier storage (even under challenging climatic conditions) and simpler and safer handling (lower weight and easier clean-up if spilled).
 

Specific features of NEXIVA® powder paint 200

  • Abrasion resistant
  • improved workability

The paint must be prepared only in the amount necessary for application. Dilution is carried out in two steps:

  • Initial paint dispersion at a ratio of 3kg of powder paint to 2L of water and mixing at high speed (~1200rpm) for 5 minutes.
  • Final dilution for the application of 30% of the pre-dispersed paint. Ready-to-use paint will have a solids content of about 50%.
  • Immediate application is recommended, avoiding storage of diluted paint.

With a bag of NEXIVA® Powder Paint 200 it is possible to prepare approximately 40L of ready-to-use paint.

Packaging

NEXIVA® powder paint 200 is supplied 25 kg paper bags.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
Brazil
+55  11  4789-8300 (Phone)
+55 11 4789-8345  (Fax)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Distributors

No distributors were found for this product

Order

My media


Go to order form

Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 (Phone)

My favorites

My products