VINNAPAS® 5115 L

VINNAPAS® 5115 L is a leveling dispersible polymer powder based on vinyl acetate and ethylene with very good defoaming properties at low viscosity for very smooth, flat surfaces.


Properties

  • VINNAPAS® 5115 L is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • As a polymeric binder VINNAPAS® 5115 L will provide very good workability to the fresh mortar.
  • VINNAPAS® 5115 L have improved adhesion<(>,<)> flexural strength, deformability and abrasion resistance.
  • VINNAPAS® 5115 L is a dispersible hard polymer powder and greatly enhances leveling. It contains a fine mineral filler as an antiblocking agent and is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 5115 L is especially advantageous in combination with synthetic superplasticizers or casein for the production of self-leveling flooring compounds and screeds.
  • Special features of VINNAPAS® 5115 L are its very good defoaming properties even without additional defoamer in the mortar formulation: this results in exceptionally smooth, uniform surfaces without air bubbles while also offering high abrasion resistance, flexural and compressive strength.
  • The product can be used to produce self-leveling flooring compounds conforming to strict eco-labeling requirements.
  • Additionally VINNAPAS® 5115 L greatly enhances leveling at low viscosity.


For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 5115 L with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


For typical application fields of VINNAPAS® 5115 L, refer to the "Application" section. Please discuss additional applications with your WACKER customer representative.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
Brazil
+55  11  4789-8300 (Phone)
+55 11 4789-8345  (Fax)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

More products

Products Technical data
Minimum film forming temperature
VINNAPAS® 5025 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5111 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5115 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 5129 L 4 °C[1] 39.2 °F[1]
VINNAPAS® 7016 F 7 °C[1] 44.6 °F[1]
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 (Phone)

My favorites

My products