VINNAPAS® 4449 E (Scale-up Product)

VINNAPAS® 4449 E (Scale-up Product) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E and provides adhesion and flexibility, improved performance on workability, consistency and wetting capability. VINNAPAS® 4449 E (Scale-up Product) is in the process of introduction into industrial use (Scale-up Product). Therefore the product data given are subject to change. Always consult WACKER POLYMERS about the product’s availability before using it for industrial purposes.


Properties

  • VINNAPAS® 4449 E (Scale-up Product) is a copolymer powder of vinyl acetate and ethylene and is dispersible in water.
  • Because of its relatively high ethylene content, this resin is soft and flexible. Its glass transition temperature (Tg) is below the freezing point of water.
  • Dry-mix mortars modified with VINNAPAS® 4449 E (Scale-up Product) exhibit improved adhesion, flexural strength, deformability, and abrasion resistance.
  • VINNAPAS® 4449 E improves fresh mortar workability and consistency. The mortar is softer, creamy and easier to process with improved troweling properties, while its thixotropy remains essentially unaffected.
  • VINNAPAS® 4449 E (Scale-up Product) contains a fine mineral filler as an antiblocking agent. It is produced without the addition of organic solvents, plasticizers and film-forming agents.
  • VINNAPAS® 4449 E (Scale-up Product) is a dispersible polymer powder in the lower Tg range. It is suitable for formulating highly flexible compounds with very good adhesion to organic substrates (polystyrene) and end products with low emissions. It can be used in applications where improved fresh mortar properties are key. 

For typical application fields of VINNAPAS® 4449 E (Scale-up Product), refer to the section "application". Please discuss additional applications with your WACKER customer representative.

Processing

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNAPAS® 4449 E (Scale-up Product) with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.


 

If the product is used in applications other than those mentioned, the choice, processing and use of it is the sole responsibility of the purchaser. All legal and other regulations must be complied with.

Slight color variations of the polymer granulate may occure without impairing the product's functionality.

Packaging

25 kg paper bags
Big Bags or bulk on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Germany
+49  711  61942-0 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Order

My media


Go to order form

Sales Contact


My favorites

My products