This content is for Denmark. Our system has detected that you are from United States. Do you want to set United States as your new country?

ELASTOSIL® N 2010

ELASTOSIL® N 2010 is a self-leveling, one-component silicone sealant, which cures at room temperature under the influence of moisture.



Properties

  • neutral curing system (alkoxy)
  • translucent
  • sprayable
  • primerless adhesion to many substrates
  • solvent free
  • Recommended service temperature from -45 °C to +180 °C

Specific features of ELASTOSIL® N 2010

  • 1-component system
  • Self-levelling
  • Shear thinning

General-purpose potting and coating grade for technical applications.

ELASTOSIL® N2010 is a ready-to-use, acid- and solvent-free, non-corrosive RTV-1 (room temperature vulcanizing, 1-component) silicone rubber suitable for many applications. Good adhesion to plastics and metals in combination with a elasticity and durability open up a wide range of potential uses.

The consistency of the uncured material allows processing by dipping, spraying, dispensing. ELASTOSIL® N2010 exhibits outstanding resistance to weathering, ageing, moisture, and UV light. The vulcanized silicone rubber permanently remains elastic over a wide temperature range from -50 °C to +180 °C (-58 to +356°F).


If removing of silicone rubber from machines or dispensing equipment is necessary, white spirit is recommended as a solvent. However, cleaning should take place before the rubber is fully cured.

Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES

 

Storage

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Sales and support

Wacker-Kemi AB
Greta Garbos väg 13, 5 th floor
16940 Solna
Sweden
+46  8  5220-5220 (Phone)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

ABIC KEMI AB
Fjaerilgatan
541602 Norrkoeping
46  11  149030 (Phone)
Contact distributor Website
ABIC KEMI AB
Fjaerilgatan
541602 Norrkoeping
46  11  149030 (Phone)
Contact distributor Website
OEM Electronics AB
Förrådsvägen 2
57343 Tranas
46  75  2424500 (Phone)
Contact distributor Website
ABIC KEMI AB
Fjaerilgatan
541602 Norrkoeping
46  11  149030 (Phone)
Contact distributor Website
OEM Electronics AB
Förrådsvägen 2
57343 Tranas
46  75  2424500 (Phone)
Contact distributor Website

Order

My media


Sales Contact

Wacker-Kemi AB
Greta Garbos väg 13, 5 th floor
16940 Solna
+46  8  5220-5220 (Phone)

My favorites

My products