ELASTOSIL® RT 623 A/B KR

$ELASTOSIL<sup>®</sup> RT 623 A/B KR

Pourable, addition-curing, two-component silicone rubber for pad printing that vulcanizes at room temperature.

 

Main application: Making printing pads.


Eigenschaften

  • very good flow
  • high reactivity for fast demolding even if large amounts of silicone fluid are added
  • fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
  • medium Shore A hardness (approx. 31)
  • high tear strength
  • long-term stability of the vulcanizate’s mechanical properties, particularly its hardness

Spezifische Merkmale von ELASTOSIL® RT 623 A/B KR

  • Additionsvernetzend
  • ausgezeichnete mechanische Eigenschaften
  • Fließfähig
  • kein chemischer Schrumpf
  • Schnelle Aushärtung bei Raumtemperatur
  • zweikomponentig

Base rubber for making printing pads.

ELASTOSIL® RT 623 A/B KR has been specially designed as a base material for making printing pads.

The vulcanizate’s high mechanical strength and long term stability of hardness make ELASTOSIL® RT 623 A/B KR an ideal base material for producing printing pads with excellent mechanical properties and long service life.

 

Important note:

The platinum catalyst is in component B.

 

Important:

A and B components may only be used together if they have the same batch number.

 

To ensure both optimum flow and homogeneity of the material, the components must be stirred thoroughly before they are removed or processed in their containers, in order to uniformly disperse any fillers that might have settled during storage.

 

Dilution charts:

The following table shows the hardness of ELASTOSIL® RT 623 A/B as a function of the added amount of Wacker Silicone Fluid AK 35 for Durometer Types Shore A and Shore 00.

 Please check also our brochures and info sheets.

Lagerung

The 'Best use before end' date of each batch is shown on the product label.

Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

Vertrieb & Support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
Vereinigte Arabische Emirate
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chimie S.A.S.
11, bis quai Perrache
69002 Lyon, France
+33  478  176-010 (Phone)

Meine Favoriten

Meine Produkte