This content is for China (Mainland). Our system has detected that you are from United States. Do you want to set United States as your new country?
ELASTOSIL® N 2199
ELASTOSIL® N 2199 is a one-part, ready-to-use, acid- and sovent-free, non-corrosive RTV-1 nonslumping paste that cures at room temperature to a permanently flexible silicone rubber on exposure to atmospheric moisture.
It shows excellent adhesion to a broad variety of substrates
特性
- meets the physical repuirements of MIL-A-46146, Group I, Type I
- excellent mechanical properties
-
Recommended service temperature from -45 °C to +180 °C
ELASTOSIL® N 2199的特殊性能
- MIL-A 46106 系列
- 单组分
- 抗下垂
- 缩合固化
Multipurpose grade for sealing and bonding for technical applications
ELASTOSIL® N 2199 is a one-part room temperature vulcanizing sealant that cures to a flexible silicone rubber on exposure to water vapor in the air. The curing rate strongly depends on temperature and atmospheric humidity in the surrounding. During the curing process a small amount of an alcohol is released.
After completion of the vulcanization process the product may be continously exposed to temperatures as high as 150 °C (302°F) without damage. If removing of silicone rubber from machines or dispensing equipment is necessary, white spirit is recommended as a solvent. However, cleaning should take place before the rubber is fully cured. Afterwards only the use of mechanical forces in combination with a swelling solvent or the use of high temperatures of approximately 100°C will help to remove sealant residues.
ELASTOSIL® N 2199 shows good primerless adhesion to many substrates. We recommend to run preliminary tests to optimize conditions for the particular application.
Detailed processing instructions are given in our brochure “ROOM TEMPERATURE VULCANIZING (RTV) SILICONES - MATERIAL AND PROCESSING GUIDELINES
储存
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
销售和支持
200233 Shanghai
中国大陆
+86 21 6130-2500 （传真）
经销商
未找到销售本产品的经销商