This content is for United Kingdom. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in United Kingdom. Please use the product search or contact us.

ETONIS® 3500 W (PRC)

ETONIS® 3500 W is suitable for modifying concrete, specialty mortar and cementitious coatings for infrastructure products, in particular for shotcrete applications in underground construction, tunneling and mining. ETONIS® 3500 W is a polymer powder with a low glass transition temperature (Tg). It remains flexible down to temperatures below freezing and is suitable for end products with low emissions. 


Properties

ETONIS® 3500 W (PRC) makes fresh concrete easier to process and pump because it reduces the frictional forces between cement and aggregates. It significantly reduces spray rebound while greatly improving adhesion to all substrates, particularly wet surfaces. Concrete modified with <(> <<)>productname> produces very little dust, especially during dry spraying.The cohesive properties of ETONIS® 3500 W (PRC) increase the sedimentation stability of concrete and specialty mortars, reducing bleeding and segregation. ETONIS® 3500 W (PRC) has a plasticizing effect and reduces the water/cement ratio without compromising the concrete's workability. In hardened concrete, ETONIS® 3500 W (PRC) improves adhesion, enhances flexural strength, reduces the modulus of elasticity (imparting flexibility) and increases abrasion resistance. It does not impair the concrete's high ultimate strength. Concrete modified with <(> <<)>productname> seals against pressing water, shows enhanced carbonation resistamat and prevents the ingress of aggressive media into the rix. In combination with suitable foam-control agents, <(> <<)>productname> also increases compressive and flexural strength.
 

Data sheets

ETONIS® 3500 W (PRC) may be added in powder form either to the dry concrete mix or the fresh mixed liquid concrete. Pumping and mixing cause the polymer powder to redisperse rapidly in the gauging water. Alternatively, ETONIS® 3500 W (PRC) may first be mixed with gauging water and then added with it to the dry-mix or liquid concrete. Protracted stirring of the polymer/water mixture is apt to cause individual components to settle out, but brief mixing will produce a homogenous mixture again. The amount of ETONIS® 3500 W (PRC) needed to modify concrete ranges from 2.5 - 10 wt. % relative to the quantity of cement. The amounts used in special applications such as mortar and cementitious coatings may be considerably higher. The exact amount will depend on the requirements profile.
Practical benefits ETONIS® 3500 W (PRC) contains no water, so transport costs are less than for standard dispersions. Using ETONIS® 3500 W (PRC) cuts system costs by reducing material consumption (e.g. rebound), time and labor. Overall, energy costs are reduced.
ETONIS® 3500 W (PRC) is suitable for modifying concrete, specialty mortar and cementitious coatings for infrastructure products, in particular for shotcrete applications in underground construction, tunneling and mining.

Packaging

25 kg paper bags
Other sizes on request.

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
United Kingdom
+44  1344  401 670 (Phone)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
+44  1344  401 670 (Phone)

My favorites

My products