This content is for Saudi Arabia. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in Saudi Arabia. Please use the product search or contact us.

VINNACEL® 314

VINNACEL® 314 is a multi-purpose dispersible semi flexible polymer powder for dry mix mortars, specifically suited for ceramic tile adhesives.

It is based on a hard copolymer of vinylacetate and ethylene which means that it has a neutral effect on rheology and provides the basic properties adhesion, workability, good open time and excellent tensile adhesion strength, giving a high degree of formulation freedom. VINNACEL® 314 is part of customized range, offering you the best-in-class solution for a wide variety of applications.


Properties

  • VINNACEL® 314 is a dispersible polymer powder based on vinyl acetate-ethylene.
  • VINNACEL® 314 is a polymeric binder and is ideal for modifying cementitious drymix mortars, especially tile adhesives.
  • It provides good workability improved adhesion, flexibility, deformability and abrasion resistance.
  • VINNACEL® 314 contains a fine mineral filler as an antiblocking agent.
  • It is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNACEL® 314 has no effect on rheological properties and is a polymer powder in the medium Tg range.
  • It is suitable for formulating high-quality, low-emissions flexible tile adhesive that feature excellent tensile adhesion strength, especially after immersion in water and heat ageing.

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNACEL® 314 with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

For typical application fields of  VINNACEL® 314, refer to the following application table. Please discuss additional applications with your WACKER customer representative.

If VINNACEL® 314 is used in applications other than those mentioned, the choice, processing and use of VINNACEL® 314 is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight color variations of the dispersible polymer powder may occur without impairing the product's functionality.

Packaging

is supplied 25 kg paper bags VINNACEL® 314

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Chemicals Middle East
Dubai Silicon Oasis s/n
0001 Dubai
United Arab Emirates
+971  4  709-9999 (Phone)
+971 4 709-9911  (Fax)
Contact

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

WACKER has a global network of specialist distributors at its disposal. Please select an application so that we can suggest suitable contacts.

Reda Industrial Materials FZE
Plot No. WWA143, P.O. Box 18177 Jebel Ali Free Zone
Dubai
971  4  8849100 (Phone)
971 4 8849200  (Fax)
Contact distributor Website

More products

Products Technical data
Minimum film forming temperature
VINNAPAS® 4023 N (KOR) 1 °C[1] 33.8 °F[1]
VINNAPAS® 4023 N (GER) 1 °C[1] 33.8 °F[1]
VINNAPAS® 4115 N (GER) 4 °C[1] 39.2 °F[1]
VINNAPAS® 4115 N (KOR) 4 °C[1] 39.2 °F[1]
VINNAPAS® 4121 N 1 °C[1] 33.8 °F[1]
VINNAPAS® 4419 E (Scale-up Product) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5005 N 11 °C[1] 51.8 °F[1]
VINNAPAS® 5010 N (GER) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5010 N (KOR) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5028 E (GER) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5710 N (GER) (Scale-up Product) 4 °C[1] 39.2 °F[1]
VINNAPAS® 5710 N (KOR) (Scale-up Product) 4 °C[1] 39.2 °F[1]
VINNAPAS® 7220 E 5 °C[1] 41.0 °F[1]
VINNAPAS® 7410 E 4 °C[1] 39.2 °F[1]
VINNAPAS® 8118 E 4 °C[1] 39.2 °F[1]
VINNAPAS® 8620 E 5 °C[1] 41.0 °F[1]
VINNAPAS® 8819 E (Scale-up Product) 4 °C[1] 39.2 °F[1]
Legend
[1] Minimum film forming temperature | DIN ISO 2115 

Order

My media


Go to order form

Sales Contact

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
+55  11  4789-8300 （电话）

My favorites

My products