This content is for Brazil. Our system has detected that you are from United States. Do you want to set United States as your new country?

This product is not available in Brazil. Please use the product search or contact us.

VINNACEL® 615

VINNACEL® 615 is a special powder additive specifically suited for plaster/ render.
It is based on a hard copolymer of vinylacetate and ethylene that provides the basic properties of adhesion and workability, giving a high degree of formulation freedom. VINNACEL® 615 is part of our customized range, offering you the best-in-class solution.

 


Properties

  • VINNACEL® 615 is special powder additive based on vinylacetate-ethylene.
  • VINNACEL® 615 is specifically suitable for plaster/ render.
  • It provides good workability and adhesion.
  • It is produced without the use of organic solvents, plasticizers and film-forming agents.
  • VINNACEL® 615 saves material on rebound loss

 

For the production of ready-mixed dry mortars, such as adhesives and patching compounds, blend VINNACEL® 615 with the other dry ingredients in appropriate equipment. Temperatures should not be allowed to rise excessively during mixing because otherwise the dispersible polymer powder could agglomerate by virtue of its thermoplastic properties. The mortar is prepared for use by adding the recommended amount of water and mixing mechanically or by hand. Since hand mixing generates little shear force, we recommend allowing the fresh mortar to slake for 5 minutes and then stirring it again. This is usually unnecessary where mechanical mixers are employed.

For typical application fields of VINNACEL® 615 refer to the section "Application". Please discuss additional applications with your WACKER customer representative. If VINNACEL® 615 is used in applications other than those mentioned, the choice, processing and use of VINNACEL® 615 is the sole responsibility of the purchaser. All legal and other regulations must be complied with. Slight color variations of the dispersible polymer powder may occur without impairing the product's functionality.

Packaging

25 kg paper bags

Storage

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Sales and support

Wacker Quimica do Brasil Ltda.
Rua Municipal, 325
06612-060 Jandira
Brazil
+55  11  4789-8300 (Phone)
+55 11 4789-8345  (Fax)
Contact
Website

How can we help you?

  • Do you need help in choosing a product or do you require technical support? If so, please contact our experts.
Ask a question

Would you like a product sample?

You can request a product sample here.

Request sample

Distributors

No distributors were found for this product

Order

My media


Go to order form

Sales Contact

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
+44  1344  401 670 (Phone)

My favorites

My products