Dieser Inhalt ist für Deutschland bestimmt. Unser System hat erkannt, dass Sie aus USA kommen. Wollen Sie USA als neues Land setzen?

ETONIS® 3500 W (GER)

ETONIS® 3500 W is suitable for modifying concrete, specialty mortar and cementitious coatings for infrastructure products, in particular for shotcrete applications in underground construction, tunneling and mining. ETONIS® 3500 W is a polymer powder with a low glass transition temperature (Tg). remains flexible down to temperatures below freezing and is suitable for end products with low emissions. 


Eigenschaften

ETONIS® 3500 W makes fresh concrete easier to process and pump because it reduces the frictional forces between cement and aggregates.
It significantly reduces spray rebound while greatly improving adhesion to all substrates, particularly wet surfaces. Concrete modified with ETONIS® 3500 W produces very little dust, especially during dry spraying. The cohesive properties of ETONIS® 3500 W increase the sedimentation stability of concrete and specialty mortars, reducing bleeding and segregation.
ETONIS® 3500 W has a plasticizing effect and reduces the water/cement ratio without compromising the concrete's workability.
In hardened concrete, ETONIS® 3500 W improves adhesion, enhances flexural strength, reduces the modulus of elasticity (imparting flexibility) and increases abrasion resistance. It does not impair the concrete's high ultimate strength. Concrete modified with ETONIS® 3500 W seals against pressing water, shows enhanced carbonation resistance and prevents the ingress of aggressive media into the mix. In combination with suitable foam-control agents, ETONIS® 3500 W also increases compressive and flexural strength.

Verpackung / Gebinde

25 kg paper bags.
Other sizes on request.

Lagerung

During storage, protect the product from contact with moisture. Prolonged storage at temperatures above 30 °C, especially in combination with pressure, humidity or exposure to sunlight, may result in blocking. Carefully seal any open containers and store them under suitable conditions. We recommend storing the product in a warehouse that provides cool and dry conditions. Do not store the product for more than six months, starting from the date at which it was received, unless the Certificate of Analysis contains a different date, which would take precedence. If the product is stored longer than recommended, it may still be used but users are advised to verify the properties required for the intended use.

Vertrieb & Support

Wacker Chemie AG
Heilbronner Strasse 74
70191 Stuttgart
Deutschland
+49  711  61942-0 (Phone)
Kontakt

Wie können wir Ihnen helfen?

  • Benötigen Sie Unterstützung bei der Produktauswahl oder wünschen Sie eine technische Beratung? Kontaktieren Sie unsere Experten.
Frage stellen

Sie möchten ein Produktmuster?

Hier können Sie ein Produktmuster anfordern.

Muster anfordern

Mehr Produkte

Es gibt keine vergleichbaren Produkte

Bestellen

Meine Medien


Zum Bestellformular

Vertriebskontakt

Wacker Chemicals Ltd.
2 Arlington Square, Downshire Way
Bracknell RG12 1WA
+44  1344  401 670 (Phone)

Meine Favoriten

Meine Produkte